Used Arburg A 270 90 350 Vertikal U Art 619 for sale (315)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN Iodozlfmkspfx Abnjtk - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Isdpfx Aozp R Izjbnotk delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Iodpex Eitbsfx Abnstk Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: good (used), machine/vehicle number: 181825, clamping force: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical Data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (approx. 80 tons) - Tie bar spacing (H x V): 370 mm x 370 mm (clearance between tie bars) - Mounting platen dimensions (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould height: Min. 250 mm, partially also min. 200 mm depending on configuration - Maximum daylight: Max. approx. 650 mm−750 mm, depending on minimum mould height - Ejector force: Typically approx. 35 kN Transport and loading can be organised Europe-wide for an additional fee upon request. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Itedpfxext E Tyj Abnok Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Itodeyzumzjpfx Abnsk Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Iodjywzv Ispfx Abnetk Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Itsdeyddzfjpfx Abnjk

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Itjdpfx Aboyk Tlasnok Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Itsdszkfh Sspfx Abnjk Includes handling robot The machine is in very good condition and is operational.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Iodpfx Aoynbcnebnstk delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) Itodpfx Asyxdwdobnsk • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Year of construction: 2003, condition: used, Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible. Itedpozun Upjfx Abnjk

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Ijdpfszt In Tex Abnetk Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Itedpfx Aozilqkjbnjk Max wept volume 144 cm3 Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Year of manufacture: 2005 Machine number: 198190 Itsdpezqcl Iefx Abnjk Dimensions L/W/H: 350x110x200cm Condition: used

Condition: used, Year of construction: 2001, operating hours: 38,850 h, clamping force: 25 kN, displacement volume: 20 cm³, injection pressure: 1,810 bar, overall weight: 1,900 kg, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Itsdpfx Ajyt R S Ajbnsk terms of payment: 100% prior to delivery

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Isdpfsygw Sijx Abnotk

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Isdszp R I Ispfx Abnstk terms of payment: 100% prior to delivery

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. In excellent condition! Price for both machines: only €16,000. Itedozrvhlepfx Abnjk

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Iodoxl Hi Tspfx Abnjtk terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Iedjzki N Tepfx Abnotk Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm Itodpfey Nkwlsx Abnek • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: good (used), Year of construction: 2007, CPU boards for injection molding machines Arburg Multronica Boards manufactured approx. 2007 Itodpfszl Tv Tsx Abnok Available: 3 units

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Ijdpfx Abozldp Rjnjtk Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Iodpsyddy Iofx Abnetk