Used Platen for sale (612)

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Chodpfxe Agxfge Agred Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, year of last overhaul: 2026, warranty duration: 12 months, Useful printing format: 70x100 2 colors 4 printing plates Included sheets: 40x100 Cjds Afuxmspfx Agrehd Diameter: 3.60 meters

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Cedpfxe Afw Dre Agrjhd Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder Chedpfx As Ad Antogrjd - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Csdpfszi Hchex Agrshd Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 1980, operating hours: 12,345,678 h, functionality: fully functional, total height: 3,400 mm, input current: 32 A, total length: 2,200 mm, total width: 900 mm, overall weight: 6,000 kg, power: 32 kW (43.51 HP), input voltage: 380 V, pressing force: 200 t, clearance between the columns: 800 mm, oil tank capacity: 400 l, stroke length: 500 mm, table length: 700 mm, table height: 980 mm, table width: 800 mm, 200-ton press from Rapp&Seidt, high-speed model, with core lifting device for intermediate plates and external hydraulic unit. Heated platens (drawing cushions) with electric heating, 25 amps each, top and bottom. Platen size 550x550 mm, central ejector. The machine operates smoothly and maintains pressure. Very little oil leakage. The machine is available immediately. Codpfj Agvxbox Agrshd

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Chjdpfx Agezwwyaorsd Min. mold height: 350 mm Opening stroke: 700 mm

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: 167988, total length: 5,360 mm, total width: 1,610 mm, total height: 1,950 mm, overall weight: 6,750 kg, Equipment: documentation/manual, Arburg 520 M - 2000 - 675 Details Manufacturer: Arburg Type of machine: 520 M - 2000 - 675 Year: 1998 Delivery time: Now Csdpfe Ahn Exsx Agrehd Terms of Delivery: Ex Works Location: Dokkum, Netherlands Control version: Multronica Screen text: German / English Operating hours: 28,000 hrs Price: On request Technical details Clamping unit Clamping force: 2,000 kN Size of mold platens (h x v): 715 mm x 715 mm Distance between tie bars (h x v): 520 mm x 520 mm Mold opening stroke: 650 mm Mold height min.: 250 mm Max daylight: 900 mm Hydraulic ejector - stroke: 225 mm Ejector force forward/backward: 65 kN Injection unit Screw diameter: 60 mm L/D ratio: 16.5 Injection pressure: 1400 bar Stroke volume: 508 ccm Shot weight, PS: 427 g Injection rate: 310 ccm/s Injection stroke: 180 mm Nozzle pressure: 60 kN Electrical and Hydraulic Equipment Nominal capacity of pump motor: 30 kW Installed heating capacity: 18 kW Adjustable barrel heating zones: 6+1 Reservoir capacity: 260 ltr. Dimensions and weights Dimensions of the machine approx.: 5.36 m x 1.61 m x 1.95 m Total machine weight: 6,600 kg

Year of construction: 1967, condition: good (used), machine/vehicle number: T161047N, A4 Size Standard Machine Chsdjkhgzfepfx Agrod

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. Chjdjzxufvopfx Agrjd If you have any questions about the machine, please do not hesitate to contact us.

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Chjdpfx Agjzmyfdjrjd Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. Chjdpfsz Ipm Rex Agrjd It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. TECHNICAL DATA Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Chjde Ahzy Hspfx Agrsd Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Condition: excellent (used), Year of construction: 2017, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift Select robot Year of manufacture: 03.2017 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 20,669 h in automatic operation Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Codpfx Agjz Ipy Rjrjhd Main motor of the machine - driven by a servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: closing of the pneumatic nozzle and dosing device Arburg Multilift Select 6kg robot, traverse Year of manufacture: 11.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic, Axis B - rotation Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: good (used), Emil Kahle Letterpress Machine Platen Manufactured in Germany by Emil Kahle Maschinenfabrik, Leipzig Reudnitz A brilliant-looking exhibit to place in a company lobby. Manually added piston. Cedpfx Asz N Sg Dogrohd Foot pedal controlled. Frame with mounted form included. Frame size approx. 365×255 mm.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Chodpfxez Iplto Agred Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Cedpoz Ipm Dsfx Agrehd Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Chodpfxjz Ipnbe Agrsd Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Csdpsz Ipwpofx Agrehd Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Chjdpjz Iqniefx Agrod Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Codpfx Aez Iqp Hegrohd Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2005, Year: 2005 Condition: functional Machine Features and Configuration: - Mechanical platen die-cutting system. - Manual feeding and removal of materials. - Die-cutting using cutting dies. - Protective safety guards around the working area. - Control panel with safety features. - Robust industrial construction. Cedpfxoz Saalj Agrshd - Self-locking frame for punching dies - Central lubrication (manual) Technical Specifications: - Maximum Sheet Size - 720 × 520 mm (B2) - Maximum Speed - 27 cycles/min - Main Motor Power - 2.2 kW - Machine Weight - Approx. 1,850 kg - Feeding System - Manual - Maximum Die Size – Self-Locking Frame - 660 × 480 mm - Maximum Cutting Rule Dimensions - 640 × 460 mm - Maximum Die Size – Fixed Frame - 720 × 520 mm The STRATI 27 is a mechanical platen die-cutting machine designed for die-cutting and processing paper, cardboard and paperboard using cutting dies.

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 Chsdsz Ipfmopfx Agrsd 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, Erba Titan 6PN cutting machine Codpfx Agsxb A Nhorshd Year of manufacture: 2000 Technical specifications: • Maximum sheet size: 1210 x 1700 mm • Pneumatic clutch and brake • Hard cutting plate • Die mounting: screwed to the frame • Three machine operating modes • Central lubrication pump • Laser safety system Machine in good technical condition, fully functional and ready for use. Ideal for companies with medium to high production volumes. EXW PRICE POLAND: EUR 30,000

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Chsdpfx Agez Ipw Aorod Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request