3
screw size 25 mm
injection shot weight in Polysterol Thermoplast 25 g/PS
closing pressure 250 kN
daylight 270 x 270 mm
opening stroke max. 325 mm
mould height - Max./min. 225 mm
daylight between platens - max. 550 mm
control Multronica
total power requirement 23 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 3,70x1,75x1,95 m
Ehgmod7
belt convoyer
machine hours: 22.255 h
1
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
Bisv7l0rbh
8
for sale is a Arburg 320 C
The machine is in a very well maintained condition.
The machine was built in 12/2003 and delivered in 2004.
Gmht0csx3
-screw 30 mm
-Core pull
-Special control close protection slide
-cycle start
-Pump 45.000 hours
-Auto 40.000 hours
The machine is still in production until week 48 and available from week 49 due to new delivery
Just contact us.
2
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
Yu8h2w
1
Arburg 370M 1000-250
Year of manufacture 1994
injection unit:
Screw diameter: 35mm
injection weight: 121 g
injection pressure: 1750 bar
Metering volume: 144 ccm
Clamping unit :
clamping force: 100 t
tie bar distance: 370x370 mm
size of clamping platens: 545x545 mm
Ejector: hydraulic
clamping unit: hydraulic
Cg0fwwunvb
Control system:
MULTRONICA
Additional equipment:
Euromap
Robot interface
Core puller X 1
Type of injection unit: Vario - this offers the possibility to use the injection unit e....
15
Only 34740 operating hours!!!
Clamping force 25 t
Screw diameter 22 mm
injection volume 30 ccm
clear distance between columns 221 x 221 mm
With sprue picker
Cfqzxnr2gq
Checked for all functions - condition very good.
1
Clamping Force: 250 kN
Mould Opening Force (max): 14 kN
Mould Opening Stroke: 275 mm
Mould Height (min): 200 mm
Max Daylight: 475 mm
Hydraulic Ejector - stroke: 90 mm
Ejector Force Forward/Backward: 15 kN
Screw Diameter: 22 mm
Ls/D Ratio: 20
Injection Pressure: 2000 bar
Stroke Volume: 30 ccm
Shot Weight, PS: 25 g
Injection Rate: 30 cm³
Injection Stroke: 80 mm
Screw Speed: 1/min
Ed3og2rho
Nozzle Pressure: 30 kN
Installed Heating Capacity: 2.7 kW
Working hours: 93.000
2
Here we offer a maintained injection molding machine.
We also gladly take maintained machines from year of manufacture 2005
in payment . Please offer us your free machines.
Manufacturer: Arburg
Type: 220S U-Version 250-60 horiz./vert
Control unit: Selogica
Year of manufacture: 2004
Operating hours: 55400 h
Extras
Swivel down electric with power operated protection slide
- core pull
- Robot interface euromap 12 , 32 pol.
- Screw highly wear resistant
- blow out device
- position controlled s...
5
warehouse no.: 503096
manufacturer: ARBURG
type: Allrounder 221 K 350-100 Selogica
year of construction: 2003
operation hours: 42165 h
clamping force: 350 kN
distance between tie bars h:: 221 mm
size of mould plates h x v: 342 x 250 mm
min. mould height: 150 mm
max. mould height: 300 mm
max. open daylight: 500 mm
Cggqnsmabq
opening stroke: 200 mm
screw diameter: 20 mm
swept volume: 31 ccm
injection pressure: 2500 bar
equipment included:
screen text german
CEE-socket 16A
machine w...
5
General Data
Machine weight 2230 kg
Clamping Unit
Clamping force 500 kn
E9bzqvn
Media
Main electronic connection 400 V3 - 50 hz
This Arburg ALLROUNDER Centex 270 C 500 - 250 Injection Moulding Machine was built in Germany in the year 1999. It is equipped with a control unit of the same brand. This machine works with clamping force 500 kN.
Application Types
Injection Moulding
6
Arburg 420C 1000-250 / Very good technical condition
Year of manufacture: 2007
injection unit:
Screw diameter: 40 mm
injection weight: 158 g
injection pressure: 1390 bar
Metering volume: 188 ccm
Clamping unit :
clamping force: 100 t
tie bar distance : 420x420 mm
size of clamping platens: 570x570 mm
Ejector: hydraulic
clamping unit: hydraulic
control: SELOGICA - touch screen
B3vryvis
Additional equipment:
Very good technical condition
Machine has produced molded parts for medical industry - p...
4
Screw diameter: 30 mm
Shot volume : 105 cm
Shot weight: 89 g
Injection pressure : 2470 bar
Bettween tie bar : 320 x 320 mm
Mould tickness : mini: 200 -maxi : 400mm
Cf7cdxve2e
Opening stroke: 250 mm
Interface robot
2
Closing force (Ton) 70
Space between columns (mm) 320 × 320
Column diameter (mm) 60
Plate size (H x V) (mm) 476 × 476
Mold height (Max- Min) (mm) 400-200
The space between the plates (mm) 650
Closing speed (mm / s) 88 (l / min)
Bh2qsan
Opening stroke (Max) (mm) 250
Ejection force (kN) 30
Opening stroke (mm) 70
INJECTION UNIT
Screw diameter (mm) 30
Injection weight (Max) (Material) (g) 89
Volume (cm3) 106
Injection pressure (bar) 1820
Injection rate (cm3 / s) 121
Nozzle force (Max ) .) (Ton) 70
N...
11
Arburg 420C 1000-250
Year of manufacture 03/2008
Control Selogica
Operating hours: approx. 65.650h (pump)
Screw diameter 35 mm
fuel weight: approx. 132gr./hp
distance between tie bars 420 x 420mm
Machine weight: 3180kg
F2mjjhkog
Extras:
1x core puller
Handling interface
Machine is free!
Changes, prior sale and errors excepted!
2
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available.
Cfp3mu0bmc
4
Arburg ALLROUNDER 275 V 250 - 70 injection moulding machine
Year of manufacture - 2018
Number of working hours - 300
Table diameter mm 750
Clamping force max kN 250
Injection unit according to EUROMAP 70
Tool height min. mm 127 - 227
Distance of tool plates
of tool
max mm 352 - 452
Tool opening max mm 225
Auger diameter - 22 mm
Injection size - 31 g
Fth3r2ueo
Injection volume - 33 ccm
Injection pressure - 2000 bar
Plasticizing unit 22 mm in version with
highest resistance to abrasion (check...
6
ARBURG 420C 800-250 with the sprue picker anvil+long leg
Year of manufacture: 1999
injection unit:
Screw diameter: 40 mm
injection weight: 158 g
injection pressure: 1390 bar
Metering volume: 188 ccm
Clamping unit:
clamping force: 80 t
tie bar distance: 420x420 mm
size of clamping platens: 570x570 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap 12
Robot interface
Control with air valve
Core pull control
Injection unit hardened - bimetal
D...
9
Here we offer a maintained injection molding machine.
Manufacturer: Arburg
Type: 320C 600-250
Control unit: Selogica
Year of manufacture: 12 / 2003
Operating hours: approx. 78,000 new pump at 52,000 in 2017
Extras
- core pull
- Robot interface
-new pump at 52.000 h in 2017
- complete documentation and software
-Control +
Fq8fx2z
German language
- from first owner - origin Germany
constant maintenance by the manufacturer and previous owner
Clamping unit
clamping force: 600 kN / 60 to.
tie bar ...
8
Arburg injection moulding machine type Allrounder 221M, year of manufacture 1996.
This machine was used for testing new products and small series. The machine can also spray vertically on partial seams, all necessary parts are included in the scope of delivery, as well as the Geiger handling and a stainless steel hopper. Not included in the scope of delivery is the granulate dryer, included stainless steel funnel.
The machine can be inspected until week 43 2022, when it will be replaced by a ne...
12
Arburg 370C 800-250
year of manufacture 09/2004
Control Selogica
Operating hours: approx. 75.000h (pump)
Screw diameter 40 mm
fuel weight: approx. 172gr./hp
distance between tie bars 370 x 370mm
Machine weight: 3180kg
Extras: 1x core puller, color dosing interface & handling interface
Cfquwpw7fu
Machine is free!
Changes, prior sale and errors excepted!
6
There are eight ARBURG Allrounder 220M available.
Cwde8893
9
Injection machine in working order in continuous operation.
Two pumps.
2un9vi
5
Arburg 420C 800-250
Year of manufacture: 1999
injection unit:
Screw diameter: 35 mm
Injection weight: 121 g
Injection pressure: 1820 bar
Metering volume: 144 ccm
Clamping unit:
clamping force: 80 t
tie bar distance: 420x420 mm
size of clamping platens: 570x570 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Very good technical condition
Machine has produced molded parts for medical industry - pure production conditions
Euromap 12
Robot interface
...
8
Arburg 320K 700-250 Injection Moulding Machine
Year - 03/2004
Used PP materials
CLOSING UNIT
Closing force (Ton) 70
Space between columns(mm) 320x320
Column diameter(mm) 60
Cetshjexpp
Plate size (H x V) (mm) 476x476
Mould height (Max.- Min) (mm) 400-200
Space between plates (mm) 650
Closing speed (mm/s) 88 (l/min)
Opening stroke (Max.) (mm) 250
Ejection force (kN) 30
Opening stroke (mm) 70
INJECTION UNIT
Screw diameter (mm) 35
Injection weight (Max.) (Material)(g) 121
Volume (cm3) 144
Injection ...
7
Machine number: 174862
Type / Model: 270-250-60
Operating hours:
Clamping force: 25 t
Opening stroke: 250 mm
Dwhudz9x
distance between columns: 270 x 270 mm
clamping platens: 400 x 400 mm
screw diameter: 22 mm
max. metering volume: 30 cm³
injection weight PS: 25 g
clamping force:
Connection: 35 kW
Accessories/equipment:
Condition: good
weight: 1,9 t
dimensions: 3.200 x 1.100 x 1.800 mm
15
Arburg 270C-400-250 + robot Multilift and conveyor belt, bimetallic barrel
(3)
Year of production: 2004
TECHNICAL DATA
Screw Dia [mm]: 30
Shot Weight [g]: 97
Injection Pressure [bar]: 2470
Clamping Force [kN]: 400
Tie Bar Distance [mm]: 270x270
Platen Size [mm]: 446x446
Mould Height min. [mm]: 200
Cfnszkfo
CONTROL
Type of Controls: Selogica
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Power [kW]: 18,4
Workinghours [h]: 75000
Dimensions [m]: 4 x 2...
4
Closing force: 800kN, screw diameter: 40mm, tool installation height: 250mm, length: 4300mm, width: 1595mm, height: 1765mm, weight: 3.18t, operational hours counter pump/ automatic: 96,085/ 79,286h.
Gvao2jk
15
Arburg 270S-250-60
year 1999
Closing 25 TO
Scrow 22
Eqd9zel
tie bar from stand 27x27
Spraying weight approx 27g
5
Arburg 320C 600-250 / machine in very good technical condition
Year of manufacture: 2001
injection unit:
Screw diameter: 35 mm
injection weight: 121 g
Injection pressure: 1820 bar
He3rlvthc
Metering volume: 144 ccm
Clamping unit :
clamping force: 60 t
tie bar distance: 320x320 mm
size of clamping platens: 446x446 mm
Ejector: hydraulic
clamping unit: hydraulic
Control system:
SELOGICA
Additional equipment:
Very good technical condition
Machine has produced molded parts for medical industry -...
5
Z394 SLR SILICONE injection unit RARITY very rare to get used!
B7i2drarml
Make ARBURG for type A 221.
Processing of liquid silicone.screw is cooled.
Attention N u r injection unit was mounted vertically on a 221.
o h n mixing machine of the silicone components.
Price in condition and scope of delivery as in the photos.
Euro 1.300.--
including packing on pallet (for piece goods) and loading
9
Injection moulding machine Arburg 320K 700-250
Year - 03/2004
Used material PP
CLAMPING UNIT
Closing force (Ton) 70
Space between columns (mm) 320x320
Diameter of column (mm) 60
Board size (H x V) (mm) 476x476
Mould height (Max.-Min) (mm) 400-200
Space between boards (mm) 650
Closing speed (mm/s) 88 (l/min)
Opening stroke (Max.) (mm) 250
Ejection force (kN) 30
Opening stroke (mm) 70
Cores (YES/NO) NO
INJECTION UNIT
Screw diameter (mm) 35
Injection Weight (Max.) (Material) (g) 121
Volume (cm3) 1...
9
Arburg 420C-800-250 (175) with conveyor belt
Product Code: 175
Availability: In Stock
Year of production: 2000
Brand: Arburg
Qsqrd
Technical data
Shot Weight: 158 g
Clamping Force: 800 kN
Screw dia: 40 mm
Injection pressure: 1390 bar
Tie bar distance: 420 x 420 mm
Platen size: 570x570 mm
Mould height min.: 250 mm
Type of controls: Selogica
Language: German
Power: 21,5 kW
Workinghours: 65.738 h
Weight: 3180 kg
Dimensions: 4,4x1,8 m
Hopper: No
Core pull: Yes
Euromap: Yes
Air valve: Yes
Hea...
4
Closing force: 600kN, screw diameter: 35mm, tool installation height: 200mm, length: 3420mm, width: 1210mm, height: 1605mm, weight: 2.33t, operational hours counter pump/ automatic: 91,096/ 74,031h.
Ce8i802zbq
12
very well maintained and constantly serviced injection moulding machine
Manufacturer: Arburg
Type: 370C 800-250
Control Selogica
year of manufacture: 2000
constantly maintained
Special features/extras:
Core pull
tool heating 9 x
highly wear resistant screw
Upgrade from floppy disk to CF drive
Handling interface Euromap 12 32 -pol.
Grwmenp
Blow-out device
Closing side:
Closing force: 800 kN/ 80 tons
tie bar size hxv 370 x 370 mm
Platen size hxv: 570 x 570 mm
Installation height min: 250...
2
Arburg 320C 500-250 / machine in very good technical condition
Year of manufacture: 2003
injection unit:
Screw diameter: 30 mm
injection weight: 89 g
Injection pressure: 2470 bar
Metering volume: 106 ccm
Clamping unit :
clamping force: 50 t
tie bar distance: 320x320 mm
size of clamping platens: 446x446 mm
Cg0evub7fs
Ejector: hydraulic
clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap 12
Robot interface
Core pull control
Injection unit hardened - bimetal
Parallel...