Used Arburg A 270 C 500 100 Art 592 for sale (325)

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Fodpfxjxqdtas Alxoph Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Fpedpfjx I Rqcsx Alxeh

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Fjdpjxl Hpgefx Alxeph Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic • Screw diameter: 25 mm • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter Fodpfoy Smc Nox Alxsph - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Dimensions: Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2002, Machine is in good condition and can be inspected in operation upon appointment. Availability: 06/2026 Full technical specifications in the attached document. Please note: 5 extra machines are available (ARBURG Allrounder 420C 1000-250) Contact us for more information. Clamping force: 1000 kN Opening force: 35/250 kN Opening stroke: 500 mm Mould installation height (min): 250 mm Fodpfxoyx D Ayj Alxjph Distance between platens (max): 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Injection pressure: 2470 / 1820 / 1390 bar Screw diameter: 30 / 35 / 40 mm

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Fpjdpfx Aetyyn Hjlxoh

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive Fpodpfsydnigjx Alxjh • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm • Platen size: 570 x 570 mm Fpedpeyglrwefx Alxjh • Max. volume: 144 cm³

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Fedpexrf Nrefx Alxeph

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Fsdpszcwmlofx Alxeph Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Fjdpfx Alozcwi Hsxjph Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Fedozatfrepfx Alxoph Air blast: 1x Robot interference: yes

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 230999 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Thermoplastic screw/cylinder, 35 mm, highly wear-resistant 1 x blow-out Coloring interface - extended monitoring - extended movement sequence - extended clamping - production control - job change - complete documentation and software (on CF card) German language - from first owner - origin Germany - regular maintenance by the manufacturer and previous owner Visible peripheral devices are not included in the offer - only if they are explicitly mentioned. Injection unit Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit Clamping force: 50 tons / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Fpjdpfx Aov U Tl Djlxeh Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - we only sell machines that we have purchased ourselves from current production, from our warehouse in Hanover. - all offered machines are checked and tested before dismantling. - we do NOT sell insolvency goods - we are NOT a broker dealing with third-party property. - all offered machines come from successful companies for which maintenance and care are a matter of course. - all offered machines are in our warehouse and can be inspected while powered on.

Condition: good (used), Year of construction: 2014, 2014 Arburg Model 320C 500-170 injection Moulding Machine Clamping Force: 50 Ton. Screw Diameter : Ø25mm. Shot Weight:75g. Clamping Force:500kN. Distance Between Tie Bars: 320 × 320mm. Platen Size (H × V): 446 × 446mm. Minimum Mould Height: 200mm. Maximum Daylight Opening: 550mm. Ejector Stroke: 125mm. Maximum Shot Volume:85cm³. Maximum Shot Weight (PS): 77g. Injection Pressure: 2,000 bar. Screw Speed Maximum: 400r/min. Nozzle Stroke: 250mm. Nozzle Contact Pressure: 40.6kN. Heating Capacity: 9.4kW. Pump Drive Power: 11kW. Total Installed Power: Approx. 20.5kW. Injection Unit Thermoplastics Injection Unit, 25mm Screw, High Wear-Resistant Design. Approximately 44,124 Recorded Working Hours. Fpjdpfxezbr Dvs Alxsh Approximate Overall Dimensions (L x W x H): 3,700 x 1,500 x 2,000mm. Approximate Weight: 2,420kg. Please Note: Robot Shown In Images Is Not Included In The Sale.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Fodpfxjxf T I Ns Alxjph Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Year of construction: 1995, Arburg 370C 600-100 Year of construction: 1995 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Fpedpey Smqajfx Alxoh Clamping unit: Clamping force: 60 t Distance between tie bars: 370x370 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Air valve x 1 Hydraulic core pull x 2 Dimensions: Weight: 3600 kg Length/width/height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating output: 4.2 kW Total output: 15.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Fedpjy Smp Aefx Alxeph Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Fpsdpfxey Smpco Alxoh Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Fpedjy Smn Sepfx Alxoh Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Fsdexvy Rlspfx Alxjph Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz Fodpoyzt R Sjfx Alxjph delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Fpodpfxey Aybyj Alxjh Opening Force | Stroke: Max. 130 kN | 350 mm. Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, clamping force: 1,000 kN, GERMANY ARBURG ALLROUNDER 420 C Machine Model: ARBURG ALLROUNDER 420 C GOLDEN EDITION Tie Bar Distance: 420 × 420 mm Clamping Force: 1000 kN Injection Unit (EUROMAP): 290 Opening Force: 250 kN Maximum Opening Stroke: 500 mm Platen Opening: 750 mm Mould Mounting Platens: 570 × 570 mm Ejector Force: 40 kN Ejector Stroke: 175 mm Material Throughput (PS): 20.5 – 24.5 kg/h Material Throughput (PA6.6): 10.5 – 12.5 kg/h Fpjdoy Awqfjpfx Alxeh Holding Pressure: 2500 / 2000 / 1530 bar Nozzle Contact Force: 60 kN Nozzle Retraction Stroke: 240 mm Machine Net Weight: 3650 kg

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm Fpjdpfxeywzv Is Alxoh - Blowing unit fitted

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Fodorthkuepfx Alxsph Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)