Used Arburg 305 for sale (349)

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Gtjdpfxevb Hbfo Afkjt

Year of construction: 2004, condition: ready for operation (used), This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW. Consider the opportunity to buy this Arburg 720 S 3200 -1300 hydraulic injection moulding machine. Contact us for more information. Godpfx Aox U D A Esfkett

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Godpfx Asx U Dnuofkott Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Gtedsx U Ax Espfx Afket Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Godjwpkfcopfx Afkott Position-regulated screw

Condition: excellent (used), Year of construction: 2019, operating hours: 14,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2019 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Godpfx Asx S I Imsfkett Öffnungsweg: 1.000 mm Schnecken DN 1: 30 mm Max. Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Schnecken DN 2: 25 mm Hubvolumen: 49 cm³ Spritzteilgewicht: 45 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: MOTOMAN Baujahr: 2018 Förderband

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 192480, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale is an Arburg Allrounder 370 C 600-100 injection moulding machine. The machine is in well-maintained, fully functional condition. Optional accessories are negotiable. Gsdpfxsx Uth Do Afkstt

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Gtedpfx Aox Up Adefkst Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Gsdpfx Aex Thw Rsfkett Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions and weight Net weight with control cabinet: 17 t

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. Gjdpfel Tnz Ejx Afkott This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: excellent (used), Year of construction: 2015, clamping force: 1,300 kN, Arburg 520S 1300-400 (2015) Clamping force: 130 t Gjdjwv Hrxspfx Afkett Screw diameter: 40 mm (higly wear resistant) Shot weight: 184 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Min/Max mould height: 350mm Opening stroke: 925mm Shot volume: 201 cm3 Type: Horizontal Drive: Hydraulic (Arburg servohydraulics) Hours: 28.000 hours only! \+ Apex Sprue picker robot 4 free cooling circuits Core pullers: yes

Condition: excellent (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Gtedpfx Afex Tfuyeket Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Ejector force: 18 kN Ejector stroke: 95 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 190958, clamping force: 600 kN, overall weight: 2,930 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 11,000 W, For sale: Arburg Allrounder 370C 600-100 injection moulding machine. The machine is in a well-maintained, fully functional condition. Optional accessories are negotiable. Godpfxjx Utggs Afkett

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Gjdpox Upzysfx Afkjtt Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2003, operating hours: 37,300 h, functionality: fully functional, machine/vehicle number: 191055, clamping force: 1,500 kN, screw diameter: 60 mm, clearance between the columns: 470 mm, displacement volume: 508 cm³, mold height (min.): 250 mm, opening stroke: 900 mm, overall weight: 4,660 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 30,000 W, power: 44.9 kW (61.05 HP), input voltage: 400 V, Equipment: documentation/manual, Arburg 470 C 1500-675 Condition: Used Year of manufacture: 2003 Operating hours: 37,300 (automatic mode) Fully functional, was in operation until week 2/2026 Screw diameter: 60 mm Shot volume: 508 cm³ Gtedpfxox Td Rto Afket Complete seal kit for the injection unit replaced in 2023.

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Gjdpfxsx Rx Eyo Afkott Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: used, Year of construction: 2006, (2006) Arburg 420 C 800-350 DUROPLAST Clamping force: 80 ton Screw dia: 40mm Godpfxsuy Sdts Afkett Weight 3400 kg Machine used for Bakelite production (DUROPLAST)

Condition: excellent (used), Year of construction: 2010, operating hours: 78,394 h, functionality: fully functional, machine/vehicle number: 213142, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine: Gjdjx Rvcvepfx Afkstt Of course, we also purchase well-kept injection moulding machines from the current year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2010 Operating hours: 78,394 h Screw and barrel replaced Machine number: 213142 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve - German language - Single owner - machine sourced from Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 tons Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2500 bar Electrical: Pump: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery by arrangement with freight costs reimbursed. Available ex stock Hannover, Germany.

Condition: used, Year of construction: 2012, operating hours: 38,652 h, screw diameter: 70 mm, Machine equipped with an ARBURG MULTILIFT SELECT 15 robot. Machine in production, can be viewed in operation, Tunisia area. Tonnage 460 Theoretical Vol. (A) 1078 Mold thickness mm 500 - 900 Moving table stroke mm 1280 Column passage mm 920 x 920 Gsdpfx Asx S H T Isfkjtt Robot interface Euromap 67 Hydraulic jacks n. 2 PM Electric charge No Control panel type SELOGICA Accumulators No Closure Knee brace Press Hydraulics Magnetic planes No Rotating table No

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Gjdox Upztspfx Afkott Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2006, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 200084, clamping force: 2,200 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection weight: 434 g, mold height (min.): 400 mm, opening stroke: 1,050 mm, overall weight: 8,500 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 45,100 W, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: documentation/manual, CS series - LCD color screen - Selogica control system - Technology level 2 servo-driven with 2 variable displacement pumps - High wear-resistant plasticizing unit - Electric and hydraulic control of NVD in the mold for the 1st injection unit Gjdpfx Afex Td Apskjtt - Minimum installation height extended to 400 mm - Connection for air blow-off unit 1 - Core pull 1 - Core pull 2 - Injection pressure increased by 10% - HHG interface according to EUROMAP 67, 50-pin - Extended robot interface (EUROMAP 12 and 67) - Temperature control unit interface - Serial printer interface V24 - PC keyboard interface - Post-pressure switching channel 1 on the moving mold platen - Interface for color separation units - 6 manually adjustable free cooling circuits - Arburg equipment package 1,2,3,5,6,7 - Injection control - Ejector plate locking connection - Centering diameter 175 mm through the moving clamping plate Completely overhauled by Makutec in 2020. In operation until CW2/2026.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 161746, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, injection weight: 59 g, mold height (min.): 250 mm, opening stroke: 750 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,014 mm, overall weight: 3,850 kg, heating capacity: 4.2 kW (5.71 HP), pump power: 22 W, power: 32 kW (43.51 HP), input frequency: 50 Hz, input voltage: 400 V, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. Gtedox Srizjpfx Afkot The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Gsdjxl Hpgspfx Afkott Screw diameter: 25 mm Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: We also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and barrel replaced) Gjdpfx Afex Rvcijkstt Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator chute - German language - Single ownership – origin Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit: - Clamping force: 400 kN / 40 t - Tie bar spacing: 270 x 270 mm - Platen size: 446 x 446 mm - Opening stroke: 350 mm - Minimum mould height: 200 mm - Maximum daylight between platens: 550 mm - Ejector stroke: 125 mm - Ejector force: max. 30 kN Injection unit: - Screw diameter: 18 mm - Injection volume: 23 cm³ - Shot weight: 21 g - Injection pressure: 2,500 bar Electrical: - Pump: 11 kW - Heaters: 4 zones, 4 kW - Installed power: 15 kW - Main fuse: 50A Weight: 2,150 kg Guarantee: Warranty until initial commissioning Loading/Shipping: Free loaded onto buyer’s truck or delivered to site against transport cost reimbursement Available ex stock Hanover, Germany Further information about our machines and company: - We only sell machines bought for our own stock from ongoing production, directly from our warehouse in Hanover - All machines offered are checked and tested before removal - We do NOT sell insolvency assets – we are NOT intermediaries dealing in third-party property - All machines offered come from successful companies where regular maintenance is a given - All listed machines can be inspected at our warehouse

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Gtsdpexdz I Usfx Afket Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Ready for use: Immediately available and fully functional The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. More details on request.