Condition: good (used), Year of construction: 1976, wire diameter range: Dolin T Aed Im Nuowekl a) single wire: 2,2 - 3,8 mm b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm output: 300/600 nails/min.

Condition: used, Year of construction: 2002, Functionality: fully functional, SCHLATTER model MG 316 Mesh welding line Technical Details - Djlin Tov Unt Nj Awokl • Purpose: For the production of standard mesh • Manufacturer Schlatter • Condition: Not in operation • Longitudinal wire Ø min: 3 mm • Longitudinal wire Ø max: 8.5 mm • Crosswire Ø min: 3 mm • Crosswire Ø max: 8.5 mm • Cycles (transverse wires) max: approx. 120 • Max mat width: 2500 mm • Max nr. of longitudinal wires: 26 • Longitudinal wire feed: From coil • Crosswire feed: From coil • Longitudinal wire spacing: 100/150/200 mm • Crosswire spacing: 100-400 mm • Year installed: 2002 • Weight: ca. 30’000 Kg

Condition: used, Reinforcement mesh welding machine VIDA For production of welded reinforcement meshes Producer of the equipment: VIDA VRES Status: in working order / operational WORKING DIMENSIONS Width of mesh (length of transverse rib): 1500 - 2400 mm Length of mesh (length of longitudinal rib): 3000 - 6000 mm Distance between longitudinal rods (between center axes): max. 2400 mm Longitudinal cell size: 150 – 200 mm Transverse cell size: 50 – 200 mm Diameter of longitudinal rib: 5,0 – 10,0 mm Diameter of transverse rib: 5,0 – 10,0 mm Longitudinal indentation: - In beginning: 25 – 200 mm - At the end: 100 – 200 mm Transverse indentation: 10 – 400 mm Number of longitudinal ribs: max. 16 pcs SCOPE OF SUPPLY Full set of equipment consists of following: - Manual loading of longitudinal ribs. Feeder of longitudinal ribs is with pipe gliders; - Welding portal with 8 pneumatic welding presses; - Power of each transformer is 110 KW – 6 pcs (4 pcs new, installed 2019, Sarmata, Italy); - Feeder of transverse ribs is a pre-loading magazine. With help of pneumatic capture they are fed for welding. (see attached video) - Length of flipping table is 6m with Schneider Electric control; - Mesh stacker for mesh up to 6m. - System with thyristor welding! Cabinet of control S7 300 Siemens DATA ON CONNECTIONS AND CONSUMPTION Djlin T Ajv Uktfewjkl Information about connections and consumption is informative. 1. Electrical current Three-phase current 400V, 50Hz Control current 24V Permissible voltage fluctuations of the electrical network ±10% Recommended connection power 600 KW Recommended power for welding in cascading mode ~60 KW 2. Cooling water Inlet temperature max 25ºС Pressure max 1,5 Bar Supply and return pressure 3,5 Bar Water hardness according to German scale, dH 7-8 Hydrogen ion, pH 7-8 Consumption max 120 l/min 3. Compressed air Pressure 6 bar Classification of air according to ISO 8573-1 min 5 Air compressor performance 200 l/h Oil and moisture pollution is not allowed, the air should be slightly lubricated 4. Environmental conditions In accordance with ISO 669-1 Air Temperature +5 - +40ºС Relative humidity 95% 5. Production speed and parameters Maximum 90 pcs per minute transverse ribs for 6mm rebar 6. Raw material requirements Raw material has to comply with technical requirements for production of spotwelded reinforcement mesh - scale free, grease-free and rust-free. Raw material can be profiled or plain with good welding properties, non-alloy, without impurities, Carbon equivalent not more than 0,4%, tensile strength max 650 N/mm2. Ribs are fed pre-straightened and cut to size on suitable equipment with correct rotating device. Max. Width of mesh: 2400 mm Min. Width of mesh: 1500 mm Max. Length of mesh: 6000 mm Min. Length of mesh: 3000 mm Distance between longitudinal rods: 2400 mm Longitudinal cell size: 150 – 200 mm Transverse cell size: 50 – 200 mm Diameter of longitudinal rib: 5,0 – 10,0 mm Diameter of transverse rib: 5,0 – 10,0 mm Longitudinal indentation in beginning: 25 – 200 mm Longitudinal indentation at the end: 100 – 200 mm Transverse indentation: 10 – 400 mm Number of longitudinal ribs: max. 16 pcs

Condition: refurbished (used), Year of construction: 2024, DOUBLE STROKE HEADER CARLO SALVI PSV revised on 2024 New electrical system. Dkelin Tsv Tzgye Awel Min. and max. diam.: 0,8 - 3 mm. Max. cutoff length: 37 mm. Max. shank length: 25 mm. Max. production per min.: 600 pz. Motor Power: 5 HP Net weight: 1600 kg. Overall size: 1900x850x1100 mm.

Condition: good (used), Year of construction: 2007, AgieCharmilles FI 240 ALP (2007) Technical Specifications of AgieCharmilles FI 240 ALP Wire Cutter (2007) • Manufacturer: AgieCharmilles • Model: FI 240 ALP • Year of Manufacture: 2007 • Machine Type: Wire EDM (Electrical Discharge Machining) Technical Data: • X-Axis Travel: 350 mm (13.78”) • Y-Axis Travel: 250 mm (9.84”) • Z-Axis Travel: 256 mm (10.08”) • U/V Axis Travel: ± 70 mm (± 2.76”) • Max Workpiece Dimensions: 750 x 550 x 250 mm (29.53” x 21.65” x 9.84”) • Max Workpiece Weight: 200 kg (440 lbs) • Wire Diameter: 0.1 – 0.3 mm (0.004” – 0.012”) • Max Taper Angle: ±30° at 100 mm height (±1.18” at 3.94”) • Wire Spool Capacity: 25 kg (55 lbs) Dslijv I Snqsn T Awekl • Generator Type: AgieCharmilles ALP (Adaptive Logic Pulse) • Surface Finish (Ra): Down to 0.2 µm • CNC Control: AgieCharmilles CNC • Power Supply: 400V, 50/60 Hz • Machine Dimensions: Approx. 2,000 x 2,000 x 2,000 mm (78.7” x 78.7” x 78.7”) • Machine Weight: Approx. 2,800 kg (6,170 lbs)

Condition: good (used), Year of construction: 1998, Functionality: fully functional, section length (min.): 8,000 mm, I am urgently selling the straightening machine Vitari NR 220 machine in continuous operation machine ready for pick up Dkjlinjtuiyzj T Awsl We sell because we replace for new Full documentation Diameter range from 2 to 7mm receiving table : 4000mm automatic unwinder

Condition: excellent (used), Year of construction: 1983, wire diameter range: 2,5 - 7,0 mm cutting length: max. 4.000 mm wire feeding speed: 40 - 80 mtr./min *complete with Wire pay-off WEBER DH 1000* Dolijfkx Trjn T Awokl

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, Functionality: fully functional, machine/vehicle number: 315.0235, type of input current: AC, Komax Kappa 315 - Cutting & Stripping Machine The Komax Kappa 315 is a cutting and stripping machine designed for processing wires with cross-sectional areas from 0.05 mm² to 10 mm², making it suitable for a wide range of wire processing applications. Key Features: Versatile Wire Processing: Handles stranded wires from 0.05 mm² to 10 mm² (AWG 30 – 8), offering flexibility for various wire types and sizes. Robust Blade System: Equipped with a high-performance blade head for quality stripping across all wire types. Dolinsv Raa Ho T Awskl Tool-Free Changeovers: Tool-free adjustments reduce setup time and increase efficiency. Automatic Conductor Detection: Detects wire diameter and adjusts parameters to optimize processing, minimizing errors and setup time. Programmable Parameters: Stores wire pressure settings for easy adjustments, enhancing flexibility. Short Wire Length Processing: Processes wire lengths starting at 30 mm, allowing versatility for different production needs. User-Friendly Interface: The intuitive TopTouch software simplifies machine setup, operation, and monitoring. Technical Specifications: Wire Cross-Section: 0.05 – 10 mm² (AWG 30 – 8) Max Outer Diameter: 10 mm Length Accuracy: ± (0.2% + 1 mm) Flat Cable Processing: Optional for cables up to 12 mm wide Wire Length Range: 1 – 800,000 mm Max Transport Speed: 2.0 m/s Noise Level: < 70 dBA Electrical Connection: 110/230 VAC ±10% - 50/60 Hz - 300 VA Dimensions (W × H × D): 465 × 385 × 460 mm Weight: 25.9 kg Komax IMS 295 MC - Inkjet Marking System The Komax IMS 295 MC is a high-performance inkjet marking system for multi-color wire marking. It’s ideal for precise, non-contact wire identification. Key Features: High-Speed Marking: Capable of marking at speeds up to 8 meters per second for high throughput. Multi-Color Marking: Uses specialized ink for high-quality multi-color wire identification. Flexible Font Sizes: Supports font heights from 1.0 mm to 4.5 mm, adaptable to marking needs. Seamless Integration: Integrates with Komax wire processing machines (Kappa, Alpha, Gamma, Zeta) via RS232 or Ethernet TCP/IP. User-Friendly Operation: Features a membrane keyboard and VGA display for easy marking settings and adjustments. Offline Functionality: Can operate independently for simpler applications, with settings entered via the integrated keyboard. Customizable Inks: Offers a variety of ink types including UV-curable and oil-resistant inks for optimal performance. Technical Specifications: Integration with Komax Machines: Compatible with TopWin 1, 2, 3, and Komax HMI. Connection Interfaces: RS232 and Ethernet TCP/IP. Max Printing Speed: Up to 8 meters per second. Font Height Range: 1.0 mm to 4.5 mm. Min Wire Diameter: 1.2 mm. Min Wire Cross-Section: 0.35 mm². Compressed Air: 6 bar (87 psi) with filtration required. Inks: Pigment-based for contrast and adhesion. Package Deal Includes: Komax Kappa 315: High-precision wire cutting, stripping, and processing machine. Komax IMS 295 MC: High-speed inkjet marking system for non-contact wire labeling. Both machines are in excellent working condition. This package is perfect for manufacturers seeking efficient and precise wire processing and marking solutions, combining the Komax Kappa 315’s wire handling capabilities with the IMS 295 MC’s high-quality inkjet marking technology.

Condition: new, Year of construction: 2023, wire diameter: 16 mm, Wirepro SU-B16 wire cutting and bending machine. Can be used foe electrical cables. wireproauto.com/product/16mm2-solid-conductor-wire-cable-cutting -bending-machine/ Doliov N Uvtjn T Awjkl

Condition: refurbished (used), Year of construction: 2024, thread length: 50 mm, Flat die threading machine E.W. MENN GW32 Completely refurbished as new. New Guides, new vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M4x50/30 mm. 750 ppm Djlisq Tr I Nen T Awskl To view and try c/o HBR srl - Calolziocorte (LC)

Condition: excellent (used), Year of construction: 2019, operating hours: 1 h, Functionality: fully functional, Wafios Wire Straightening and Cutting Machine Model: R 36 EBS Year: 2019, 2016(2), 2015 (Model R 35 EBS) Specifications: Feed Speed: 5-180 m/min Wire Diameter: 600-800 N/mm2: 2.5-7.0 mm Cutting Lengths: 150-1000 Performance, rods: max. 180 pcs./min Dolin Tsv Nn Ipo Awskl Chamfering 4 Available

Condition: good (used), Year of construction: 2009, working width: 2,600 mm, welding power (max.): 640 kVA, usable width: 2,550 mm, For sale Multi-point welder for the production of welded mesh, fencing panels transformer power 8x80kva Dsljuhn Arsin T Awskl max mesh width 2500 length using a wire feeder 3000mm with manual unfolding up to 6000mm standard mesh 50mm, can be other 40mm, 45mm; 55mm, 51mm and others, the issue of changing the pressure strips 51 welding heads 2 wire projectors transverse and longitudinal wire diameters from 3.00 to 6.0mm we have to sell the machine by the end of 05/2025 to free up space in the hall

Year of construction: 2018, Condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Dkslisdx Ryyjn T Awsl coil hight: max. 800 mm

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Dkslin Tev Nv Dlo Awjl Price per piece A reel is available if needed.

Year of construction: 1995, Condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Deliov Ip Smon T Awokl

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement Dkolin T Ajh N Di Dowol - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 25560, Arbeitsbereich Trägerhöhe : min. 70mm - max. 250mm Trägerlänge : in Stufen von 100mm - max. 14000mm Basisbreite : 60mm, 80mm Zick-Zack-Teilung : 200mm Stapelhöhe : max. 500mm Djlinevrb U Io T Awskl Drahtdurchmesser Obergurt : min. 5mm - max. 12mm Untergurt : min. 4mm - max. 12mm Zick-Zack : min. 3,5mm - max. 6mm Arbeitsgeschwindigkeit : max. 75 Takte/min (30m/min)

Condition: new, Year of construction: 2025, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Product information: - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Doliom Tm H Aon T Awokl Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 1980, Condition: excellent (used), wire diameter range: 3,0 - 10,0 mm cutting length: up to 3.000 mm wire feeding speed: 23 - 130 mtr/min. Dkslin Tjgmua Aj Awsl *complete with non-motorized decoiler WEBER DH 1000* *machine is been repaired and new painted*

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Djlin T Aor Izikjwekl

Condition: ready for operation (used), A fully automated winding machine for wire processing is available.Winding capacity (depending on the number of turns):approx. 120 coils/h, wire thickness: 5x1mm/15x55mm, inner diameter: 23mm-66mm, max. spool weight: 7kg, machine dimensions X/Y/Z: approx. 5000mm/2500mm/2000mm, operating hours (still in use until the end of April): approx. 16625h.Units: 6-fold wire uncoiler, wire straightening unit, milling unit, coiling, cutting and ejection system.Product materials: enameled copper wires and insulating materials without dust or adhesive residues.Documentation available.On-site inspection is possible. Dkolinev Hrgdj T Awel

Year of construction: 1996, Condition: excellent (used), TRANSFER HEADERS CARLO SALVI 246/TR 2 DIE 4 BLOW Used in excellent condition with monitoring system. Fully functional, operational. Possibility of having the machine with total overhaul and closed cut. Number of dies: 2 Number of punches: 4 Max cutoff tonnage: kg. 2.200 Max cutoff diameter: 8 mm. Dolop Am Ucein T Awjkl Max cutoff length: 75 mm. Max k.o. length first die: 85 mm. Max k.o. length second die: 60 mm. Heading tonnage: kg. 26.000 Max k.o. length (punch side): 10 mm. Max. speed: 250 pcs./minute Available c/o HBR srl - Calolziocorte (LC)

Condition: good (used), Year of construction: 2010, BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Dolin Tspm H Hae Awokl Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: like new (used), Year of construction: 2022, Main Technique Parameter Styles TK-335 Wire diameter(Carbon steel wire)(mm) Φ1.5-Φ3.5 Max.Outside Diameter Φ50 Total power(kw) 12 Wire Feed Speed 100m/min(max) Wire Feed Servo Motor 5.5 Cam Servo Motor(kw) Dkjlinjv Eaqns T Awol 5.5 Pitch Servo Motor(kw) 1.0 Machine working state size(LxWxH)(mm) 1580x1200x1850 Main Host Weight(kg) 1060 Voltage 3AC 380V/50HZ

Year of construction: 2023, Condition: refurbished (used), TRANSFER HEADERS SACMA SP22 2 DIE 2 BLOW Completely overhauled - Like new semi-tubular group installed Dolspgw Ugsin T Awskl Diam. 10x100 170 ppm.