Used other wire processing machinery for sale (37)

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm Fpedpfxjd H Ur Ao Alxsh 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils Fpedpfx Ajyx Exiolxeh 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Year of construction: 1976, condition: used, Machinetype: Hinge joint fence machine Make: WAFIOS Type: HJGM Constr. year: 1976 Fodpfx Aljw Rq Avoxoph wire diameter range: 2,0-3,0 mm working width: 2000 mm vertical distance of wires: 150 mm

Year of construction: 2024, condition: excellent (used), – Power – 3,5 kw – Managament – PLC Control – One Appointments Units – Run out table – 15 m ( Possibility of upgrade ) – Diameter of block – 300mm – Wire diameter range – 1.8 – 3.2 mm – 1550 N/mm2 – Ring diameter – 300 – 420 mm - possible another diameter of rings – Capacity – 52,5 m2/8h for mesh with next characteristics : Fpsdpoyx E Haefx Alxeh Ring diameter 350 mm – 9 coils Wire diameter – 3 mm Mesh dimensions – 10 x 5 m – dimensions of mesh – 10x 5 m ( possibly longer ) depends on the weight of the final mesh – Power – 3,5 kw ( complete line ) – Number of workers – 1 per shift

Year of construction: 1969, condition: used, functionality: fully functional, Basic information: Control system: Siemens S7-300 Technical details: Fpedpfszb N D Hex Alxsh Materials processed to date: Bare copper up to 17.3 mm finished rope diameter Intended use: for twisting copper and aluminum wire Total number of machine spools: 12 Technical condition: Electrical system renewed in 2018, very well maintained, without unwinder Spool flange diameter max: 630 mm Spool core diameter min: 250 mm Spool usable width max: 400 mm Spool overall width max: 480 mm Spool capacity max: 500 kg Single wire diameter max: 10 mm Lay length min: 38.3 mm Lay length max: 254 mm Rotor speed: 450 / 750 min⁻¹ Production direction: from right to left Drive type: DC motor Drive power: 285 kW Drive speed: 1500 min⁻¹ Total connected power: 346 kW Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 24 V Electrical cabinet: present Take-up disc: present Compactor: present Winder: present Safety devices: present Consisting of: STOLBERGER ASL 100/2 double disc take-up LEIMBACH CR1601 winder Electrical cabinet

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Fodpfjzaq Dlsx Alxoph Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: used, Multifunction Center Syntax 25 Working hours: 4900 h. Fjdpfx Aloy Uhwmjxeph Bar diameters: 8 – 25 mm 2 bars simultaneously: 8 – 16 mm Max. Bundle length: 12000 mm. Feeding speed: 3,2 m/s Bending speed: 1000 º/s Cutting time: 4/10 s Installed power: 31 kW Working hours: 4900 h. Bar diameters: 8 – 25 mm 2 bars simultaneously: 8 – 16 mm Max. Bundle length: 12000 mm. Feeding speed: 3,2 m/s Bending speed: 1000 º/s Cutting time: 4/10 s Installed power: 31 kW

Year of construction: 2010, condition: ready for operation (used), A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, max. cable diameter with dancer arm system: 35mm, max. operating speed: 143rpm, machine dimensions X/Y/Z: approx. 1300mm/300mm/1700mm. Documentation available. An on-site inspection is possible. Fodpjy Tn Icefx Alxoph

Year of construction: 2009, condition: ready for operation (used), A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible. Fjdpfsy Tn Nmjx Alxjph

Condition: ready for operation (used), A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Fedpfxey Tn Nyo Alxoph

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2Wire EDM machineWorkpiece height: approx. 250 mmWorkpiece weight: approx. 400–500 kgTable size: approx. 600 x 400 mmSupply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA.Wire EDM technology, automatic wire feed, hydraulic systems, robust construction.Control panel, emergency stop, sensor monitoring. Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Fpodpfx Alsy S Ni Eexoh Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 2014, condition: ready for operation (used), A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible. Fpjdpfx Aley I Ac Roxeh

Year of construction: 2005, condition: ready for operation (used), Voltage: 400 V three-phase Power: 12 kw Fsdpfx Alepgwa Roxoph Max. temperature: 1200 °C Interior dimensions: 600 * 550 * 400 mm External dimensions: - Width: 1150mm - Length: 900 mm - Height: 2450 mm

Condition: ready for operation (used), Voltage: 400 V three-phase Power: 48 kw Max. temperature: 1200 °C Inside dimensions: 3000 * 550 * 500 mm External dimensions : - Width: 1270 mm Fjdpfepgwbrex Alxsph - Length: 3400 mm - Height: 2700 mm

Year of construction: 1997, condition: ready for operation (used), Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible. Fodpoy Eg Dmofx Alxjph

Year of construction: 1963, condition: used, functionality: fully functional, machine/vehicle number: D44L/7979, Offer Number: D44L/7979 Machinetype: testing machine Make: LOSENHAUSEN Type: UHP 40000 kp Constr. year: 1963 drawing force: 20 - 400 kN Fpodpfxjwi Syzo Alxeh drawing distance max.: 1100 mm Pressure: 40 to Location: In our warehouse

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Fpodpfeyxxy Hjx Alxoh

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Fjdpoyxq Upjfx Alxeph

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Fjdpfxeyvuuze Alxeph

Year of construction: 1991, condition: ready for operation (used), A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible. Fodpjyvuu Uofx Alxsph

Year of construction: 1976, condition: ready for operation (used), A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible. Fodpfx Aleyvuu Ijxsph

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Type WM 2002/6 - 100, serial no. 2566 Fpedpfxsyuthie Alxjh

Condition: used, Manufacturer SCHNELL (Italy) Model barwiser 22 Main Characteristics Up to 22 mm *Images may not correspond to the real Fjdpoymcpgjfx Alxsph

Condition: used, SCHNELL Automatic Stirrup bender PRIMA R 12 Fsdpfxeymcbio Alxeph Full revamped “as new”, Up to 12 mm Main Characteristics - Single strand: 6 / 12,7mm - Double strand: 6 / 10 mm - Max bending angle: 180° - Central mandrel diam.: 20 / 50 mm - Max pulling speed: 95 m/mm to 310 m/mm - Max bending speed: 1450°/sec - Bending distance: 1500 mm to 4´-11” - Avg. power consumption: 3 kW/h - Working pressure: 7 bar - 90/100 psi Single strand: 6 / 12,7mm Double strand: 6 / 10 mm Max bending angle: 180° Central mandrel diam.: 20 / 50 mm Max bending speed: 1450°/sec Bending distance: 1500 mm to 4´-11” Avg. power consumption: 3 kW/h Working pressure: 7 bar - 90/100 psi

Year of construction: 2006, condition: refurbished (used), SCHNELL Robomaster 6012 bending robot Currently in production Length: 12 metres Capacity: 3 bars of 40mm Refurbishment time: 60 days max from order date. Length: 12 metres Fsdpfx Aloymb S Texoph Capacity: 3 bars of 40mm