Used mesh welders for sale (39)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 2,450 mm, wire diameter (max.): 12 mm, type of input current: AC, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 Gtslhcdsv Ed Anow Iou - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter (max.): 12 mm, type of input current: AC, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System Gslhsvtg Sbscdw Istu o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: S1.4020.1137, working width: 1,220 mm, welding power (max.): 225 kVA, wire diameter (max.): 10 mm, nominal power at 50% duty cycle: 225 kVA, mesh size: 1,150 mm, We are selling our Schlatter mesh welding machine, type Pg 12.0/4/B. The machine is being sold as shown in the pictures, including extraction system and safety cabinet. Unfortunately, the exact operating hours cannot be determined, but in recent years the machine has operated only on a few days per year. This is not due to the machine's condition, but rather because we no longer manufacture large quantities of mesh panels. Numerous spare parts are included in the scope of delivery. The machine is immediately ready for dismantling. Gslhcoyazftsdw Istu

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Gtolhsyaqzqocdw Ieu Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Year of manufacture: 2016 Rated primary voltage U1N: 400 V Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Secondary phases: 1 ~ Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 Gjlhcdwowu Tu Do Iotu WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Gtolhcswu Dcxedw Isu Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: new, Year of construction: 2025, working width: 2,500 mm, wire diameter (max.): 12 mm, mesh size: 100 mm, 6-12mm Mesh length 6M Gelhcdwexyqg Ej Ietu Mesh width 2.5M 24 welding point Welding speed 40-70 times/min

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Gtolhcdoxvmamjw Iju Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Gtjlhcdwoxlvn Eo Ieu

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Golhsvvf T Ajcdw Ietu

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system. Gtjlhcdexgg T Ujw Iju

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision Goljxgg Rtshcdw Ijtu RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Year of construction: 2019, condition: new, Machine is designed to produce two spacers in the same time, with double stroke (pitch) of 150 mm, with heights from 70 to 220 mm, diameter of line wires from 3.5 to 5 mm and diagonal wire diameter from 3.5 to 4 mm. The main parts of machine: 1. Pay-off 2. Straightening system 3. Line wire pooling unit with loop. 4. The system of diagonal wire bending 5. Welding unit 6. Output table with bending unit Gtslhcdwod N Hv Eo Iju 7. Energy electrical cabinet 8. Control cabinet

Year of construction: 2010, condition: excellent (used), Technical Details : Golhcefwm D Tedw Iotu - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Gtslhjwp Ilyscdw Ieu Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Year of construction: 2019, condition: new, Machine is designed for making panel welded meshes, width 2150 mm, length 6000 mm with distance between line wires 150 mm, with distance of cross wire from 25 to 300 mm and wire diameter from 4 to 8 mm. Basic parts of the machine: 1. Pay-off for line wire. 2. Straitening unit. 3. Line wire pooling unit with loop. 4. Welding unit. 5. Shear. Gtslhcdwjd N Hvqo Iou 6. Turner with panel’s stacker. 7. Energy electrical cabinet. 8. Control cabinet. Machine is new !

Year of construction: 1990, condition: excellent (used), Technical Details : – Year – 1990/2012 – Model – 8/SR12 – Speed – max. 70 tact/min. Gtslhcdwed Sfgbe Iou – range of opening mesh space – 25×25 – 100×100 mm – Wire range – 1,5 – 5 mm – Number of transformers – 4 x 100 kw – Mesh width – max. 1200 m – Mesh lenght – 1000 – 3000 mm On line was made new control panel and transformers in 2012

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Gslhcdwsrn N Efj Ietu Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Gtjlhjqy Ek Aocdw Iju Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) Gtelhsryv S Uocdw Iju The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm Gjlhjlf Iqnecdw Istu - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Gtjlhcdweryv Sij Isu Weight: approx. 10 tons Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual

Condition: new, Year of construction: 2025, Starweld PE STARWELD PE is a high performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets. The mechanisms are designed in a way that the produced mesh is of high quality, even when the wire processed is of a very small diameter. Products can be used for cages, fencing, etc. Features: Line & cross wire feeding from coil Edge trimming Mesh fabric slitting Fully or semi automatic system for mesh cutting, rolling & ejecting Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life Specifications Model PE2100 PE2600 PE3100 Gtjljd Rlaiohcdw Iou Mesh Width (mm) 2100 2600 3100 Min Line wire spacing (mm) 25 25 25 Min Cross wire spacing (mm) 12.5 12.5 12.5 Range of wire diameter (mm) 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 1.2-3 or 1.4-3 or 1.4-3.5 Working speed (strokes/min) Up to 160 Up to 150 Up to 130

Condition: new, Year of construction: 2025, STARWELD PO is a high performance mesh welding line for the production of medium & heavy weight wire or reinforcing mesh panels. It is a line appropriate for big production needs. Design is made in accordance to the specific project & mesh type parameters – e.g. there can be a rolling mechanism for the machine to produce rolls too if so desired. PRATTO can supply all the necessary auxiliary equipment. Products can be used in the construction industry. They are also used for shelves, grids, cages, pallets and containers as well as for fencing (plain & bent). Features: Line wire feeding from coil Cross wire feeding from coil Edge trimming (optional) Panel stacking (optional) Panel tilting (optional) Gtslhcdod Rlalow Iju Rolling mechanism (optional) Bending unit (optional) Excellent mesh accuracy Fully automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life

Condition: new, Year of construction: 2025, Features: Line & cross wire feeding from pre-straightened and cut bars Automatic feeding of cross wires from hopper Manual feeding of line wires Automatic Panel stacking Gtelhcjf Ar N Ujdw Isu Excellent mesh accuracy Fully or semi-automatic CNC programmable High speed High precision through advanced servo technology Easy machine adjustments Easy maintenance & use High reliability & long life