Used Wire Straightening for sale (4,177)

Condition: used, Year of construction: 1999, max 70 mm hydraulic ja Fjdpfew Sygajx Ab Tsgk

Condition: used, wire diameter - max. 10 mm Fodpfx Aewu Hg Hjb Tegk wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Fodpfxevc Aklj Ab Tsgk Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder Fgodpjin Rn Aefx Ab Tok -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Fsdpfxexzikfs Ab Tjgk

Condition: good (used), Year of construction: 2011, functionality: fully functional, section length (min.): 100 mm, section length (max.): 3,500 mm, type of input current: three-phase, For sale: Used WAFIOS RS4 wire straightening machine in good condition. Technical data: • Model: RS4 • Manufacturer: WAFIOS • Straightening range: 3 to 6 mm • Equipment: includes blade, straightening stones, feed rollers in various sizes, decoiler • Year of manufacture: 2011 Condition: Fodpfx Aew U Eubeb Tsgk • Fully functional, regularly serviced Location: 74931 Lobbach Price: €9,900 net

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. Fodpfjxnryiox Ab Tsgk The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: good (used), Year of construction: 2005, Straight and cut machine Brand - RAVNI ( France ) Fgedpfjpxnv Dex Ab Tsk Min/Max wire diam. - 4- 10 mm Max cutting length - 6 meters Construction year - 2005.

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. * Fgsdpfx Abeu Ic Hno Tok

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider Fedpfjwyaywox Ab Tsgk ● svi ležajevi u mašini su FAG ili SKF

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Fodpfxjim Itto Ab Tegk

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles. Fodpfx Ajrdvq Asb Tsgk

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole. Fgedpfxjwunmbe Ab Tsk

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fsdpfxjxtwdds Ab Tjgk

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) Fgedomk S Slepfx Ab Tek This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V Fgsdpfx Absq Rxz Tj Tsk -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". Fedpjf Nku Rsfx Ab Tjgk The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg Fsdpsfcl H Uefx Ab Togk

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Fodpfx Absfcl H Ie Tegk -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 25101.6261 Category: Used Mast: 3F7000 Fsdpfx Abjxz Ufho Tsgk Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Condition: LIKE NEW!!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Fsdpfx Absw Ucyue Togk Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: ready for operation (used), max width: 1525 mm min thickness: 1,2 mm max thickness: 3,5 mm Fgodpfox Enhgjx Ab Tok 7 straightening rolls dia 100 mm 4 pitching rolls dia 100 mm

Condition: ready for operation (used), max width: 1525 mm min thickness: 1,2 mm max thickness: 3,5 mm 7 straightening rolls dia 100 mm 4 pitching rolls dia 100 mm Fodpfx Asx Enhmeb Tegk

Condition: ready for operation (used), Type: R674/11/F 11 x 50 mm straightening rolls 4 80 mm feeding rolls Weight: 1200 kg Fgedpfox Enf Sox Ab Tok

Condition: ready for operation (used), max width: 1000 mm Fedpfx Abjx Engco Tjgk