Used wide belt sanders 1100-1199mm working width for sale (109)

Condition: used, Calibrator 1100, iron rollers and pad, used, tested. Worn conveyor belt. Ksdpfon A H Uxox Agtodl

Condition: used, SCM Sandya LS1 R110 calibrating machine with 1100 mm roller and brush. Approximate power consumption: 13 kW. Used. 11 kw roller Ksdpfsuk Hi Rox Agtjdl 2.2 kW brush Carpet 0.75 kw

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm Kodoyy Nnkepfx Agtodl First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Ksdpeyymlyofx Agtsdl Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: used, Year of construction: 2004, functionality: limited functionality, power: 55 kW (74.78 HP), type of input current: three-phase, Model description on the information plate: KACCT 1150. Stored in dry conditions. Kdodpfeyyannsx Agtol

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Kedpfjyulfmex Agtsdl Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: excellent (used), functionality: fully functional, Wide belt sander SCM Sandya 10 Working width: 1100 mm Working height: 3–160 mm Kedpfxjyuclwe Agtedl Number of sanding units: 2 1. Calibrating roller 2. Combi unit with pad CE certificate Main motor power: 11 kW

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min - Sanding height adjustment motor power: 0.25 kW - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW Kodpfx Agsytp Agetsdl From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Kedoyxqdkjpfx Agtsdl Applications: - Solid wood - Veneer - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Width 110 cm 13 kW You can call or write to us. We can speak and write in German and Russian. You can also send messages in English Kjdpfsrf S Rkox Agtodl 32.4.10.

Condition: excellent (used), working width 1100 mm Kdsdpfeyw N R Tox Agtel calibrating unit with metal roller calibrating unit with rubber roller combination unit with rubber roller and pad activation of machine functions from the control panel pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor material thickness gauge two feed speeds for sanding belts emergency stop switch

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Kdsdpfx Asihfawegtjl Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder Kdsdpfx Agjxtxhkstjl 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2000, I sell the widebelt sanding machine Costa A CT 1150, year 2000. Configuration hard rubber cylinder - electronic segmented pad. Working width 1150mm Kdsdpfx Aog Trubegtol Bands 1180x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2300kg 2 motors 15 + 11 kW Additionally built brushing unit with bottom cleaning brush. Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW Kjdpfx Ajywrzbjgtodl 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 1992, Wide belt sander Manufacturer: Bütfering Model: AWS 1100 Year of manufacture: 1992 Sanding width: 1,100 mm Kodpfx Agoywi Rmjtodl Max. workpiece thickness: 150 mm Abrasive belt dimensions: 1,900 x 1,100 mm Power: 15 kW Feed speed: 2.5–12.5 m/min, variable

Condition: used, Year of construction: 1979, Belt width: 150 mm Belt length: mm Table size: approx. 2600 mm x 1000 mm Extraction connection: Motor power: 3 kW Kdsdpfowm Nrpsx Agtel Machine length: Machine width: Weight: 900 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW Kdodpfx Agjyt Nvyjtsl - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: excellent (used), Wide Belt Sander SCM Sandya 30 RT Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration drum Unit with segmented shoe Kdodpfxoyh N Icj Agtjl Motor power: 1. 15 kW 2. 11 kW Optical oscillation Abrasive belt dimensions: 2620x1115 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total height: 2,202 mm, total length: 3,900 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 4,200 kg, working height: 96 mm, conveyor belt speed: 250 mm/s, input current: 54 A, conveyor belt length: 6,800 mm, For sale: robust Houfek Final 1100 brush sanding machine in DBB configuration (rotary brushes + 2 rollers). The machine has seen very little use. Offered fully equipped (brushes, abrasive paper). Testing is possible—removal from the current location is planned for the end of March. Immediate sale possible. Ksdpfx Agoyngcystjdl

Condition: excellent (used), Wide belt sander VIET 211 Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Roller Roller Kdsdpfeyf T Ukex Agtol Main motor power: 11 kW

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Kdsdpfx Ajv Ivuuogtsl Workpiece thickness up to approx. 170 mm Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: excellent (used), Year of construction: 1994, Motor data: 380 V - 50 Hz - 62 A 2 grinding units Burste electric height adjustment grinding width: 1100 mm operating pressure: approx. 8 bar Kdjdpfx Agogg R Trstsl grinding belt length: 2150 x 1130 mm weight: approx. 3500 kg dimensions: W/D/H approx. 2100/2500/2300 mm

Condition: ready for operation (used), Working width 1100 mm Roller unit Table adjustment Kodpfx Asylv Eregtjdl The rubber roller is worn at one spot!! Further details on request

Condition: good (used), Year of construction: 2003, overall weight: 1,900 kg, Paoloni Kalibra 30 - maximum sanding width 110 cm - one 15 kW motor - first unit with a metal roller, Kjdjrumipspfx Agtjdl - second unit with a grinding shoe and a rubberized roller - shoe control from the table - weight 1900 kg. The machine works very well.