Used Edge and profile sanding machinery for sale (171)

Call

Condition: used, Type: KSO 1500 Year of manufacture: 2020 Condition: function-tested, very good, used - oscillating sanding belt - table size 680 x 310 mm - sanding surface 770 x 150 mm - belt speed 16 m/sec. - swiveling sanding unit 0 to 90 degrees - motor 1.5 kW / 400 V Bgl3uu0k37s

more

Listing

D - Hessen

18,491 km

Kündig Uniq-S

Call

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Equipment and technical data: - Complete grinding unit motorized inclinable up to 45 degrees without any table adjustment. - Feed system integrated in machine carrier, conveyor belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0,55 kW Speed infinitely variable 3-15 m/min. 9aznv3f - Double sided operation with face and contact sanding side - grinding belt size 200 x 2000 mm - belt drive motor 3 kW - Oscillation stroke programmable 10-90 mm - CE-conform/dust tested Location: Hochheim Availability: short term

more

Listing

Naprawa

17,865 km

Edge sander

Minimax Unilev 150

€4,115

Call

Condition: used, Technical data: Sanding belt width: 150 mm Sanding belt length: 2160 mm Work table dimensions: 220x1400 mm Swivel sanding unit: 0-45° Power: 380V Motor power: 3 kW Overall dimensions: 7dxe2jncjy Length: 1440mm Width: 720mm Height: 1300mm

more

Listing

Łabuńki Pierwsze

17,596 km

Profile edge grinder

€850

Call

Condition: not inspected (used), Good morning, We offer for sale an edge grinder equipped with 3 grinding units. To begin with, some useful information about the machine: * 3 grinding units: - two smaller units with a grinding foot ( viscus ) for grinding facets, profiles. - one large aggregate with grinding foot for main grinding. * all units with full adjustment in the XY plane and angle. Huyy3es * pneumatic viscera belt tensioning. * grinding thickness range: 10-100 mm * infinitely adjustable feed speed in the range of 5-25 m/min * brush motors 2 x 0,33 HP and 1,8 HP * feed motor 0,55 kW * extraction stubs fi 110 mm * size of grinding belts: 4 x 88 cm and 12 x 290 cm * pull chain size: 8,5 x 170 cm * weight about 650 kg * overall dimensions 244 x 175 x 145 cm ( L x W x H ). * transport dimensions 244 x 110 x 190 cm ( L x W x H ). The machine has not been used for a long time and therefore the rubber and pneumatic components are scarred, the actuators are stagnant and the paint coating looks like in the photos. The electric motors are in working order, the machine is complete, however, it requires a thorough reparation, sealing and refreshing and therefore I am selling it as inoperative.

more

Listing

San Giovanni Al Natisone

18,442 km

Sanders

Samco Unilev 15

€750

Call

Condition: used, Samco Unilev 15 Belt Sander Kglfa0tq

more

Listing

Radviliškis

17,377 km

Belt sanding machine

O.M.A UNICA

€6,500

Call

Condition: used, Year of construction: 1999, Belt sander, used for chair leg sanding. Good working condition. B0903cto

more

Listing

Sierakowska Huta

17,772 km

edge grinder

Holzmann KOS 3000C

€3,372

Call

Condition: new, Catalog number H0254 - new machine - CE certificate - dimensions of the top 960x350 mm - belt dimensions 3000x200 mm - belt speed 20 m / s - engine power S1 3kW / 4.5kW - 400V supply voltage Overall dimensions: - length 1870mm - width 830mm - height 1060mm Box / pallet dimensions: - length 171cm - width 94cm - height 135cm - weight 361kg PRODUCT FEATURES The heavy edge grinding machine KOS 3000C is a device designed for professional production plants and for qualified craftsmen. Excellent workmanship guarantees long trouble-free use and high work safety. Woru8 The grinder is extremely stable, but above all very efficient. It has a grinding system adjustable with a lever in the range of 90 to 45 degrees. Serine is equipped with a device for grinding the edges of veneer elements with fine adjustment. Quick change from the function of sanding veneer to sanding wood. Sanding belt oscillation with an additional motor. Thanks to oscillation, optimal use of the sanding belt is ensured Delivery range: - sanding belt - veneer installation - ruler for oblique cutting Net price: PLN 14500 Net price: EUR 3372 Net price, calculated at the rate of 4.30 PLN / EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - the possibility of leaving another machine in the settlement. The given prices are net prices. Net price given for international transactions, EU customers with EU NIP. Please confirm availability and current price before placing an order for a new product.

more

Listing

D - Bayern

18,464 km

Veneer solid wood edge sanding machine

Wegoma KS 2400

Call

Condition: used, Year of construction: 2002, Second hand machine Year of manufacture 2002 Hj3wyc2q0p edge sanding machine with electromechanical oscillation by 15 mm pendulum stroke of the motor disk swiveling of the sanding unit by 90° by hand crank (stepless angle adjustment; read off by scale) Attachment table with suction for the use of grinding rollers Height-adjustable table for utilizing the sanding belt motor 2,2 kW Oscillation motor 0,11 kW Table size 880 x 370 mm belt dimension 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Availability: short term Storage location: Röllbach II

more

Listing

Bitburg

18,682 km

Wegoma KS 2600 FU

€2,450

SAMCO Unilev15 edge grinder

Call

Condition: excellent (used), Year of construction: 2009, Wegoma veneer and solid wood edge sanding machine KS 2600 FU With electromechanical oscillation, infinitely variable swivel sanding unit Sanding unit with digital display for swivel unit can be tilted from 0-90 degrees, Locking of the sanding unit, infinitely height-adjustable work table, easy conversion to solid wood sanding machine. solid wood sanding machine. Technical data: Voltage: 400 V, 50 Hz Fw7s8xp3 Belt motor power: 2.2 KW Oscillating motor: 1.1 KW Belt speed: 14m/sec Work table: 950x450 mm Belt dimensions: 2600x200 mm External dimensions: /LxWxH: 1700x1000x1150 mm Extraction: 2x100 mm Weight: 300 kg Location: From stock 54634 Bitburg - immediately available -

more

Listing

Łabuńki Pierwsze

17,596 km

Samco Unilev15

€1,300

WINTER Kantenschleifmaschine KOS2600 ECO

Call

Condition: excellent (used), * belt width 150 mm * adjustable veneer sanding track on one side and " back" 13x76 cm on the other. * tops 22 x 145 cm * both tops adjustable at an angle of 0-30 degrees * adjustable sanding height * main motor with power 2,9 kW * pneumatic oscillation and belt tensioning * technical and visual condition very good Gc07jl7 * weight 490 kg * overall dimensions 100 x 72 x 145 cm ( H x W x L ).

more

Listing

Cantù

18,766 km

edge sanding machine

VOLPATO LS - 1N

Call

Condition: good (used), Code: 0177 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sander for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 130 Gmb300 Min working length mm 100 Variable belt speed feed 5/30 mt/min Tilting sanding unit - 2 speed motor 700/1400 rpm Motorised lifting and tilting Motorised front adjustment Sanding belt dimensions mm 80 x 2450 Overall dimensions mm 2600 x 1400 x 1550 h Weight kg 720

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€1,950

Call

Condition: new, Technische Daten: - Tischgröße 750 x 300 mm - Schleifbandabmessung 2600 x 150 mm - Schleifbandrückwand 850 x 200 mm - Bandgeschwindigkeit 20 m/sec. - Tischhub bis 200 mm - Motorleistung Oszillation 0,25 kW Ifv93nxp2 - Motorleistung Hauptmotor 3,0 kW - Absauganschluss 100 mm - eigener Oszillationsantrieb mit Getriebemotor - höhenverstellbarer Gusstisch zweifach Säulengeführt - Doppelabsaugmechanismus von Hauptschleifaggregat und Rundschleiftisch - Schleifaggregat stufenlos schwenkbar bis 45C - graphitbeschichtete Lauffläche - inkl. Gehrungsanschlag mit Winkelskala - inkl. ausziehbare Tischverbreiterung mit Multirollensystem - inkl. Schleifband - Abmessungen L=1480, B=760, H=1160 mm - Gewicht Netto 180 kg - Gewicht Brutto 230 kg

more

Listing

HOLZKRAFT Kantenschleifmaschine HOLZKRAFT KSO 150 M

D - Nordrhein-Westfalen

18,510 km

Edge grinding machines

HOLZKRAFT Kantenschleifmaschine HOLZKRAFT KSO 150 M

€2,849

Call

Condition: as good as new (ex-display), - Exhibition machine - with swiveling sanding unit, and oscillating sanding belt ----- Technical data ----- Swivel range of sanding unit: 45 °, sanding belt width: 150 mm, sanding belt length: 2,600 mm, Work table dimensions: 750 x 300 mm, Height adjustment range: 200 mm, Ncrpcmh8 belt speed: 20 m/sec., oscillation stroke: 20 mm, suction nozzle Ø: 140 mm, motor 400 V: 4,0 hp / 3,0 kW, motor oscillation: 0,34 PS / 0,25 kW, Dimensions (LxWxH): 1,600 x 850 x 1,350 mm, weight: 215 kg - Special offer price - new exhibition machine

more

Listing

D - Hessen

18,491 km

Edgesanding machine Tecnolegno

Löwer KSM 1

Call

Condition: used, Year of construction: 1983, Second hand machine Used edge grinding machine of the company LöwerType KSM 1 year of manufacture: 1983 MNr.: 45404 8swieamgfg Engine power: 3 hp Grinding belt speed: 1300 m/min grinding belt dimension: 2280 x 140 mm working width: 140 mm Table length: approx. 1000 mm Oscillation 3 rollers feeding apparatus Availability: short term Location: Hochheim

more

Listing

Aalen

18,546 km

Edge processing machine

Rehnen KBA

Call

total length: 4,000 cm, total width: 1,100 cm, total height: 1,700 cm, overall weight: 900 kg, Condition: used, No. 04386 Edge processing machine REHNEN KBA Used Complete edge processing in one pass - edge grinding, profile milling, profile grinding In the profile sanding area, it is already equipped with pneumatically controlled and scanning professional sanding shoes with standard long and narrow sanding belts. The workpiece is fed via a chain conveyor. Roller pressure and height can be adjusted using a handwheel. There is a pull-out roller support at the front. Grinding unit: Oscillating grinding and fine grinding via contact roller and sanding pad. The sanding unit oscillates up and down 30 mm. The engine power is 3 kW. Milling unit: Milling radii, profiles and chamfers at the top and bottom at 12,000 rpm. Controlled via a frequency converter. Different profiles and radii possible. Includes 4 milling tools (2x R3 and 2x R6). Profile grinding unit: Profile grinding with endless sanding belts over an operation-controlled and air-cooled profile sanding shoe. All sanding belts with pneumatic belt tension Power connection 6 kW Sanding tape size for edge sanding: 150 x 1500 mm Sanding tape size for profile grinding: 30 x 1960 mm Feed speed: 6 m/min Material thickness 10 - 60 or 20 - 90 mm Min. material size: 80 x 65 mm Suction diameter: 160 mm Including various new sanding belts Transport dimensions approx. 4000 x 1100 x 1700 mm LWH Weight 900kg In order to avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Dmzbwp Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

more

Listing

Scerne

18,439 km

Tecnolegno Compact, CE

€3,500

Call

Condition: good (used), Year of construction: 1998, One-belt swivel sander 2w0uwe

more

Listing

Spatenhof

18,269 km

Lassm LS-1N

€5,900

WINTER Kantenschleifmaschine KSM 2600 EC

Call

Condition: used, Edge and profile sanding machine Lassm LS-1N 7nwtesfvxz Compactly built machine Applicable for processing of edges and profiles / solid wood, veneered and lacquered parts working height max. 130 mm Workpiece length min. 50 mm Infinitely variable feed with conveyor belt and pressure rollers 5 - 30 m/min. feed motor 1,5 kW Sanding belt drive motor 1-1,5 kW Sanding belt speed 7-14 m/sec grinding belt dimensions 80 x 2450 mm Oscillation of the sanding belt 0-20 mm machine from carpenter's shop liquidation / retirement Machine in very well maintained - condition ex location NET € 5.900,00

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€1,800

Call

Condition: new, Technische Daten: - Tischgröße 750 x 300 mm - Schleifbandabmessung 2600 x 150 mm - Schleifbandrückwand 850 x 200 mm - Bandgeschwindigkeit 20 m/sec. - Tischhub bis 200 mm - Motorleistung Oszillation 0,25 kW - Motorleistung Hauptmotor 3,0 kW - Absauganschluss 100 mm - Oszillationsantrieb mit Getriebemotor - höhenverstellbarer Gusstisch zweifach Säulengeführt - Doppelabsaugmechanismus von Hauptschleifaggregat und Rundschleiftisch - Schleifaggregat stufenlos schwenkbar bis 45C Djfzab - graphitbeschichtete Lauffläche - inkl. ausziehbare Tischverbreiterung mit Multirollensystem - inkl. Gehrungsanschlag mit Skala - inkl. Schleifband - Abmessungen L=1720, B=760, H=1160 mm - Gewicht Netto 180 kg - Gewicht Brutto 230 kg OPTION: HERMES Schleifmittel mit Papierunterlage BW 110: - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 60 EUR 73,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 80 EUR 69,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 100 EUR 63,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 120 EUR 63,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 150 EUR 63,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 180 EUR 63,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 220 EUR 63,00 - VE mit 10 Stück Schleifbänder 150 x 2600 mm Korn 240 EUR 63,00

more

Listing

Holm

18,240 km

REHNEN SK-2

Call

Condition: new, Year of construction: 2023, machine/vehicle number: nicht zutreffend, Motor output:4 kW Table dimensions:2000x1000 mm Weight:560 kg :200 mm Nkq9h :3200 mm :200 mm

more

Listing

D - Bayern

18,464 km

Frommia KSB 68

Call

Condition: used, Edge grinding machine used with exhauster support table for left belt roll Work table inclinable Sanding belt oscillation D7ritxxp9 Motor 4 HP, 3800 rpm Belt speed 22m/sec Sanding belt 2280 x 150 mm work table 820 x 350 mm Exhaust port on the exhauster 100 mm Weight approx. 280 kg Availability: short term Storage location: Röllbach

more

Listing

Aalen

18,546 km

edge grinding machine

VOLPATO LVO 150 T

Call

Condition: new, Year of construction: 2022, No. 04320 Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Fiag0xt Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines

more

Listing

Lambsborn

18,678 km

Edge grinder

Eumacop

€580

Call

Condition: excellent (used), Edge grinder Izijquh Simple version With additional table Sanding belt width 150 mm

more

Listing

Tauberbischofsheim

18,531 km

WINTER Kantenschleifmaschine KSM 2740 EC

KNOEVENAGEL SZA

Call

motor power: 1,500 W, overall weight: 130 kg, Condition: ready for operation (used), Machine with 2 shaft ends Cuiawudsok 2 air drums Spindle speed 1000 rpm.

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€1,650

Call

Condition: new, Technische Daten: - Tischgröße 900 x 300 mm - Tischhöhenverstellung 120 mm - oszillierendes Schleifaggregat - Motorleistung 3,0 kW / 400 V - Schleifbandabmessung 2740 x 150 mm - Bandgeschwindigkeit 16 m/sec. - Schleifaggregat stufenlos schwenkbar 0-90C - Absauganschluss 100 mm - graphitbeschichtete Lauffläche - inkl. 3 Schleifzylinder Durchmesser 38, 50 und 76 mm zum Rundschleifen - inkl. Auflagetisch zu Rundschleifen - inkl. Unterschrank mit Aufbewahrungsfach - inkl. Gehrungsanschlag mit Skala - inkl. Schleifband - Abmessungen L=1470, B=810, H=1120 mm - Gewicht Netto 190 kg - Gewicht Brutto 250 kg OPTION: Schleifmittel mit Papierunterlage: 33iegrye - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 60 EUR 79,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 80 EUR 72,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 100 EUR 66,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 120 EUR 66,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 150 EUR 66,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 180 EUR 66,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 220 EUR 66,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 150 x 2740 mm Korn 240 EUR 66,00

more

Listing

Wiefelstede

18,341 km

Belt sanding unit

Homag Bandbreite mm

€1,450

Call

Condition: used, Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm Lqmfj -Weight: 292 kg/piece

more

Listing

D - Bayern

18,464 km

Löwer KS 225

Call

Condition: used, Year of construction: 1988, Second hand machine Boevtat0 Year of manufacture 1988 grinding belt width 150 mm Sanding belt length 2250 mm Working surface 800 x 150 mm motor 1,1 kW with support table left Availability: short term Storage location: Röllbach

more

Listing

Sontheim

18,579 km

Walter KS 17S

€3,600

Call

motor power: 3 W, total length: 200 cm, total width: 80 cm, total height: 160 cm, overall weight: 350 kg, Condition: reconditioned (used), Year of construction: 2002, Walter KS 17s edge sanding machine Table support 940X280mm Kztg2r3xxn Adjustable cylindrical sanding table 650X420 4 deflection rollers with diameter 35/65/95/125 mm Belt speed 9/18 m/sec Sanding belt 150/200X2600 Oscillation

more

Listing

Barntrup

18,395 km

edge sanding machine

€400

WINTER KANTENSCHLEIFMASCHINE KSM 3000 EC

Call

Condition: good (used), Edge sander size of the sanding area height 200 mm x length 950 mm sanding unit tiltable schwenkbar table tiltable table size 950 mm x 280 mm motor 2,2 kW without oscillation Pvsdcq overall size 1600 mm x 650 mm x H 1200 mm

more

Listing

Nattheim

(dealership location)

18,550 km

Kantenschleifmaschine

Samco Unilever 15 N

Call

Condition: used, Year of construction: 1994, machine/vehicle number: KK/015597, Auflagetisch : nur vorne und hinten I9cylqzi8d Auflagetisch schwenkbar : einseitig 0-45 Grad Auflagetischlänge : 1440 mm Auflagetischtiefe : 710 mm Furnierkantenschleifeinrichtung : auf 2. Seite fest installiert Pneu. Oszillation vom Band : Ja 20 mm Bandgeschwindigkeit 1 : 12 m/min Bandgeschwindigkeit 2 : 24 m/min Schleifbandlänge : 2170 mm Schleifbandbreite : 150 mm Gewicht ca. : 416 kg Absaugdurchmesser : 120 mm rechts und links Lagerort: Lieferant

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€2,500

Call

Condition: new, Technische Daten: - Tischgröße 960 x 350 mm - Schleifbandhöhe 200 mm Bechdxy - Schleifbandabmessung 3000 x 200 mm - Schleifbandrückwand 1050 x 200 mm - Oszillationshub ca. 20 mm - Bandgeschwindigkeit 20 m/sec - Tischhub bis 230 mm - Motorleistung Oszillation 0,25 KW - Motorleistung Hauptmotor 3,0 kW - schwere und sehr hochwertige Gesamtausführung - Furnierschleifeinrichtung mit Feinjustierung, Kontaktschuh, Entlastungsrollen und Anschlägen - Einlauflineal mit Nuten fuer Furnierüberstände - eigener Oszillationsantrieb mit Getriebemotor - ausziehbare Tischverbreiterung mit Multirollensystem serienmäßig - Schleifaggregat stufenlos schwenkbar bis 45C - Rundschleiftisch serienmäßig - Gehrungsanschlag mit Noniuswinkelskala - gefederte Bandspannung serienmäßig - graphitbeschichtete Lauffläche - Absauganschluss 100 mm - inklusive Schleifband - inklusive Furnierschleifeinrichtung - inklusive Gehrungsanschlag - Abmessungen L=1680, B=930, H=1200 mm - Gewicht Netto 285 kg - Gewicht Brutto 350 kg OPTION: Schleifmittel mit Papierunterlage: - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 60 EUR 105,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 80 EUR 97,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 100 EUR 88,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 120 EUR 88,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 150 EUR 88,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 180 EUR 88,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 220 EUR 88,00 - VE mit 10 Stück HERMES BW 110 Schleifbänder 200 x 3000 mm Korn 240 EUR 88,00

more

Listing

Dahlem

18,647 km

Holzkraft KSO 150 FD

€4,150

Call

table length: 960 mm, table width: 350 mm, Condition: excellent (used), Year of construction: 2016, Edge sanding machine Holzkraft KSO 150 FD, condition very good, used. Sanding unit can be swiveled up to 45° via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable additional table with suction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction unit Extendable roller table extension With rubberized sanding drum Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed guide for veneer overhangs Quick changeover from veneer edge to solid wood sanding possible Equipment details: With rotating star and rotating suction plate for quick changeover of 3 different sanding radii: Ø 60 mm, Ø 100 mm, Ø 120 mm Equipped with a stable console as standard in preparation for mounting a feed unit Technical data: Work tables L x W 960 x 350 mm Work table height adjustment 230 mm Sanding surface 1050 x 150 mm Belt speed 20 m/sec. Oscillation stroke 20 mm Motor 400 V / 50 Hz 3.0 kW Oscillation motor 0.25 kW Cfw0ojv8lk Belt length 3100 mm Belt width 150 mm Suction nozzle diameter 140 mm Dimensions L x W x H 1900 x 900 x 1350 mm Weight 350 kg.

more

Listing

D - Hessen

18,491 km

Rehnen Junior R1

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture 2023 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of Crw89anwma adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central extraction system with an air speed of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Hochheim

more

Listing

Holm

18,240 km

HOLZKRAFT KSO 150 M, sofort lieferbar!!

€2,849

OSCILLATING BELT SANDING machine

Call

Condition: new, Year of construction: 2022, machine/vehicle number: 5362600, -Sanding unit can be swiveled up to 45° via lever. -The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Bfjcavqivnm -Oscillating sanding belt with separate gear motor for better sanding results -Oscillation optionally switchable -Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii -Spring-loaded belt tension automatically compensates for belt length differences. -With double suction -Extendable roller table extension -With rubberized sanding roller Equipment details -Sanding unit can be swivelled up to 45° via lever Dimensions and weights Length approx. 1600 mm Width/depth approx. 850 mm Height approx. 1350 mm Weight approx. 215 kg Connection suction Suction port diameter 140 / 100 mm Drive power Oscillation motor 0,25 kW Work table(s) Working table length 750 mm Working table width 300 mm Work table height adjustment 200 mm Height adjustment of longitudinal table 200 mm Cross table height min. 720 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2600 mm Grinding belt width 150 mm Belt speed(s) 20 m/s Grinding surface length 850 mm Grinding surface width 200 mm Oscillation stroke 20 mm

more

Listing

Mariano Comense

18,765 km

VOLPATO LASM NTS 150 C

Call

Condition: like new (used), OSCILLATING BELT SANDING machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 Hsq2kba3 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : worktop mm.280 x 1000 tiltable worktop mm.300 x 950 sanding belt development mm.150 x 2580 driven roller diam. mm.75 additional worktop mm.300 x 300 abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 motor for oscillation Hp 0.5 oscillating stroke mm.20 overall dimensions cm.182x105 H=cm. 150 volt. 380/50 machine weight kg.400

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER Kantenschleifmaschine KSM 2515

WINTER

€1,150

Call

Condition: new, Technische Daten: - Motorleistung 2200 W - Spannung 400 V - Tischgröße 855 x 300 mm - Absauganschluss 100 mm - Schleifbandmaße 2510 x 150 mm - Schleifbandgeschwindigkeit 16 m/Min. - Schleifband Oszillation für optimale Ausnutzung der Schleifbandfläche - Handrad zur Tischhöhenverstellung - Schleifband-Schnellspannung - Schleifaggregat bis 90C schwenkbar - Zusatztisch zum Rundschleifen - Transport Abmessung L=1.290 mm, B= 720 mm, H=510 mm - Gewicht 148 kg Lieferumfang: - Unterschrank mit verschließbarem Aufbewahrungsfach - Schleifband - Gehrungslineal - Längsanschlag OPTION: Schleifmittel mit Gewebeunterlage: - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 60 EUR 105,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 80 EUR 98,00 Cudotkpp - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 100 EUR 95,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 120 EUR 95,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 150 EUR 95,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 180 EUR 95,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 220 EUR 95,00 - VE mit 10 Stück Gewebeschleifbänder 150 x 2510 mm Korn 240 EUR 95,00

more

Listing

D - Hessen

18,491 km

Holzkraft KSO 150 F PRO

Call

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Ctm9kfm2dm DESCRIPTION Grinding unit swivels by hand crank Machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Grinding sole with graphite coating for a longer service life of the grinding belt Height-adjustable sanding table for utilization of the entire sanding belt width Additional table for grinding radii with integrated suction openings Sanding sleeve device with attachable work table Spring-loaded belt tension automatically compensates for belt length differences With adjustable stops excellent for veneer sanding Veneer overhang can be sanded off effortlesslyTECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Power oscillation motor 0,11kW Connection suction Suction port diameter 2 x 100mm Work table(s) working table length 950mm Working table width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Grinding unit grinding belt length 2640mm grinding belt width 150mm Belt rotation speed(s) 14m/s Oscillation stroke 15mm grinding surface length 800mm Grinding surface width 150mm Swivel of grinding unit 0 45 SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-board tool Miter fence Location: Hochheim Availability: Immediately

more

Listing

HOLZKRAFT KSO 1500 - sofort lieferbar!!!!

Holm

18,240 km

HOLZKRAFT KSO 1500 - sofort lieferbar!!!!

€1,899

Kantenschleifmaschine KSM 2260

Call

Condition: new, Year of construction: 2022, machine/vehicle number: 5368150, -Sanding unit infinitely adjustable at an angle (0 - 90°) for vertical and horizontal sanding. -Oscillating sanding belt for better sanding results and longer sanding belt life -Quick and easy sanding belt change via quick clamping system -Sanding soleplate with graphite coating as standard for a longer service life of the sanding belt Height-adjustable, robust work table made of cast iron with T-slot, supported by spring bearings -Easy adjustment of the table height by gas pressure springs -Incl. lateral sanding sleeve device for sanding curves and radii -Incl. infinitely adjustable miter fence -Two suction nozzles Ø 100 mm Equipment details -Sanding sleeve device incl. three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100mm), four table inserts and height-adjustable table with suction device -table insert with slots for optimal suction -stepless swiveling sanding unit from 0° - 90 -locking at 0°/22,5°/45°/67,5°/90° -With rubberized sanding roller and graphite coating on the sanding pad -Second emergency stop switch at the top of the sanding unit as standard -Variably inclinable sanding unit for various sanding operations, e.g. vertical and horizontal sanding Dimensions and weights Length approx. 1350 mm Width/depth approx. 585 mm Dl3cvp Height approx. 1210 mm Weight approx. 162 kg Connection suction Suction port diameter 100 / 100 mm Work table(s) Longitudinal table length 680 mm Longitudinal table width 310 mm Height adjustment longitudinal table 130 mm Cross table height min. 920 mm Electrical data Input power 2,1 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Fuse protection 10 A Grinding unit Grinding belt length 2270 mm Grinding belt width 150 mm Belt speed(s) 16 m/s Grinding surface length 770 mm Grinding surface width 150 mm

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€850

Call

Condition: new, Technische Daten: - Arbeitstisch 810 x 180 mm - Tischhöhenverstellung 100 mm - Bandlänge 2260 mm - Bandbreite 150 mm - Schleifbandrückwand 770 x 170 mm - Schleifaggregat schwenkbar 90C - 0C - Bandgeschwindigkeit 16 m/sek. - Zusatztisch 290 x 265 mm - Drehzahl 1420 U/min - Absaugstutzen FI 100 mm - Motorleistung 1,5 PS / 400 V - Platzbedarf 1320 x 700 x 1120 mm - Gewicht 125 kg komplett mit: - mechanisch oszillierendes Schleifaggregat - Höhenverstellbarer Zusatztisch - Arbeitstisch mit integrierter T-Nut zur Aufnahme des Gehrungsanschlages Ciq9c8mfan - Bedienerfreundliche Höhenverstellung des Arbeitstisches mittels Handrad - Gefederte Bandspannung, dadurch automatischer Ausgleich von Bandlängendifferenzen - Stufenlos schwenkbares Schleifaggregat für vertikales und horizontales Schleifen - Serienmäßig mit gummierter Schleifrolle für Innen- und Außenschliff - Leichter Schleifbandwechsel mittels Schnellspannhebel - Graphitbelag auf der Schleifbandrückwand erhöht die Gleiteigenschaft des Schleifbandes - Unterschrank mit Werkzeugfach - Längsanschlag - 1 Schleifband

more

Listing

D - Hessen

18,491 km

Rehnen Junior R1

Call

Condition: new, Year of construction: 2022, New machine Ywja7dux Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central extraction system with an air speed of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Hochheim

more

Listing

HOLZKRAFT KSO 200 F, sofort lieferbar!!!

Holm

18,240 km

HOLZKRAFT KSO 200 F, sofort lieferbar!!!

€3,899

Kantenschleifmaschine KSM 2600

Call

Condition: new, Year of construction: 2022, machine/vehicle number: 5363001, Oscillation: 1 ja / nein : 1 ja/nein W7kxvk7s : 1 ja/nein

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€2,700

Call

Condition: new, - Tischgröße 750 x 300 mm - Bandlänge 2600 mm - Bandhöhe 150 mm - Schleifbandrückwand 850 x 200 mm - Oszillationshub ca. 20 mm - Bandgeschwindigkeit 20 m/sec. - Tischhub bis 200 mm - Motorleistung Oszillation 0,25 kW (0,34 PS) - Motorleistung Hauptmotor 3,0 kW (4,0 PS) - Absauganschluss 140 mm - Abmessungen L=1720, B=950, H=1260 mm - Gewicht 250 kg - eigener Oszillationsantrieb mit Getriebemotor - höhenverstellbarer Gusstisch zweifach Säulengeführt Rerqh - ausziehbare Tischverbreiterung mit Multirollensystem serienmäßig - Doppelabsaugmechanismus von Hauptschleifaggregat und Rundschleiftisch - Schleifaggregat stufenlos schwenkbar bis 45C - Gehrungsanschlag mit Noniuswinkelskala - graphitbeschichtete Lauffläche komplett mit: - Schleifband - Gehrungsanschlag

more

Listing

D - Hessen

18,491 km

Kantenschleifmaschine KSM 3000 S

Samco Unilev 15

Call

Condition: used, Year of construction: 1984, Second hand machine Year of manufacture 1984 Technical data: Length of the working tables: 1440 mm total width of the two work tables: 710 mm inclination adjustment of the working tables: 0 30 degrees Working pressure: 6 bar grinding belt length: 2170 mm width of the grinding belt: 150 mm Speed of the grinding belt: 10 20 m/sec vertical adjustment of the oscillation unit: 125 mm weight: 450 kg Air consumption: 25 NL/min Electricity: 380 V / 2,9 kW Availability: short term Crxarcthri Location: Hochheim

more

Listing

Leipzig-Stahmeln

(dealership location)

18,265 km

WINTER

€3,400

Call

Condition: new, - Tischgröße 960 x 350 mm - Schleifbandhöhe 200 mm - Bandlänge 3000 mm - Bandhöhe 200 mm - Schleifbandrückwand 1050 x 200 mm - Oszillationshub ca. 20 mm - Bandgeschwindigkeit 20 m/sec - Tischhub bis 230 mm - Motorleistung Oszillation 0,25 KW (0,34 PS) - Motorleistung Hauptmotor 3,0 kW (4,0 PS) - schwere und sehr hochwertige Gesamtausführung - Furnierschleifeinrichtung mit Feinjustierung, Kontaktschuh, Entlastungsrollen und Anschlägen - Einlauflineal mit Nuten fuer Furnierüberstände - eigener Oszillationsantrieb mit Getriebemotor - ausziehbare Tischverbreiterung mit Multirollensystem serienmäßig - Schleifaggregat stufenlos schwenkbar bis 45C - Rundschleiftisch serienmäßig Bmu8ycek - Gehrungsanschlag mit Noniuswinkelskala - gefederte Bandspannung serienmäßig - graphitbeschichtete Lauffläche - Absauganschluss 140 mm Lieferumfang: - Schleifband, Furnierschleifeinrichtung, Gehrungsanschlag - Abmessungen L=1700, B=950, H=1260 mm - Gewicht 400 kg

more

Listing

D - Hessen

18,491 km

Holzkraft KSO 200 F

€4,299

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers Sdl37 with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

more

Listing

D - Hessen

18,491 km

Profile grinding machine

Arminius ST 10

€1,250

Special edge grinding machine

Call

Condition: used, Year of construction: 1991, Second hand machine Used profile grinding machine of the company Arminius type ST 10 year of manufacture: 1991 MNo.: 0-290-02-1567 Engine power: 1,1 kW Spindle adjustment: 0° - 135 Crw7oxpg88 Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

more

Listing

D - Hessen

18,491 km

Rehnen SK-1

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 THE ADVANTAGES 4 workstations on one machine 80, 300 and 1000 mm radii Straight and curved grinding back 150 mm belt height Pneumatic belt tensioning Stepless pneumatic aggregate oscillation Solid cast iron aggregate long lasting good sanding results Suction all around the worktable Only the highest quality components Because we are convinced of ourselves 5 years warranty Every machine handmade in our home country (Rehnen) Lifetime spare parts supply GS & BG dust tested Motor power: 4 KW Sanding belt size: 150 x 2700 mm Sanding belt speed: 15m /sec. Sdmgj table size: 345 x 2000 mm space requirement: 2000 x 3000 mm weight : 560 kg Suction diameter : 140 mm Availability : short term Storage location: Hochheim

more

Listing

D - Nordrhein-Westfalen

18,510 km

Rehnen Junior R1

Call

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central exhaust system with an air velocity of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Crw8g28ovp Availability: short term Storage location: Solingen

more

Listing

D - Nordrhein-Westfalen

18,510 km

Rehnen Junior R1

Call

Condition: new, Year of construction: 2022, New machine Ieoeu7j Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central exhaust system with an air velocity of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Solingen

more

Listing

D - Nordrhein-Westfalen

18,510 km

Kündig Uniq

Call

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Equipment and technical data: Dlbfz9 - Double-sided operable with face and contact grinding side - grinding belt size 200 x 2000 mm - belt drive motor 3 kW - Oscillation stroke programmable 10-90 mm - Sanding unit motorized inclinable up to 45 degrees - CE-conform/dust tested Accessories: Semi-circular table on belt drive roller LxWxH 1800x1000x1500 mm Weight 610 kg Location: Solingen Availability: short term

more

Listing

D - Hessen

18,491 km