Used Ott for sale (75)

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm Hodszktpqspfx Aa Esnp MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Shipping dimensions: 2,900 x 1,400 x 2,000 mm Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (Automatic adjustment) Adjustable limit switch for specific opening width

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper Hodpfxjzk Nt Ee Aa Ejnp - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: ready for operation (used), Year of construction: 1996, pressing force: 14 t, This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. • Plate dimensions: 2550 x 1350 mm • Heating: Hot water heating • Number of pressure cylinders: 6 Hsdpfx Aajx D E Ave Eonp • Total pressing force: 135 t

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100 mm max. height of the processed workpiece: 160 mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding units cleaning brush – from below conveyor belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types, 1.1 kW motor: 15 kW with pneumatic brake Hnodpfx Aaezcd Amj Esp additional pneumatic shoe operating pressure: 6-8 bar diameter of the dust extraction nozzle: 2x160 mm, 1x120 mm overall dimensions L/W/H: 2700x2100x2200 mm weight approx.: 3000 kg – German production – 2 units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32,900 PLN Net price: 7,833 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. Hsdpfxjzb Iuqo Aa Ejnp With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Round pot glue application unit - with a second glue application unit for PUR processing - Feed unit with automatic edge banding magazine - Pressing zone with multiple pressure rollers - End trimming: 2 motorized saw units for end/edge trimming - Top/bottom router: 2 router units with guide wheels for radius or chamfer - Radius profiling blade: pneumatically controlled, for finishing radii - Flat profiling blade: for smoothing edge surfaces Hjdpfx Aezk Nw Dea Eonp - Polishing unit: 2 polishing discs with motors for final finishing - RIEPE spray system - Control: PLC with control panel - Replacement of the feed frequency inverter by OTT in 2022 - Feed speed approx. 10-12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 - 12 mm - Power supply 3 x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse rating 35 A (5 x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m Hodpjx Uru Njfx Aa Eonp

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit metal roller, slip Hnedpfx Aaszkfybo Ejp unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Hjdpszi A R Iofx Aa Ejnp Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Hodpfx Astwp Iwea Esnp connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Hnjdpekkflbsfx Aa Esp Dimensions (L x W x H): 2590 x 1330 x 1950 mm Weight: approximately 2800 kg Press stroke: 380 mm

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Hnsdpfx Asv Azfzoa Esp

Condition: used, functionality: fully functional, 0.75 kW Spray system Hnedsigaf Rspfx Aa Esp Flap disc 150/70/25 mm, sisal/leather/synthetic fabric Flap disc 150/70/25 mm, sisal/synthetic Flanges 70 mm reduced to 11 mm (2 pcs), metal Control panel on top 4 motors at 0.18 kW each for the brushes

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Hodsfbr S Ropfx Aa Eenp • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n Hnedpfshy Tlrjx Aa Esp 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter Hsdpfxowiwnqe Aa Eonp

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Hedpfx Aajlc Ewij Eonp Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Hnjdsxgpaqspfx Aa Ejp Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 1991, The machine has been in operation. The glue tank was overhauled approximately 2 years ago. The pressure rollers should be replaced. The units can be used well as spare parts. Used Manufacturer: Ott Type: Kantomat K 5 Year of manufacture: 1991 Hedpfx Aaszkl H Us Esnp Machine no.: K 5200 Granule quick-heating tank Feed rate m/min: 12 / 18 Solid edges up to mm: Edge banding from roll up to mm: 3 Swiveling edge banding unit: Type K 14 Flush trimming Flush radius trimming Radius drawing blade controlled Edge buffing, oscillating Automatic edge magazine Large roll support Edge thickness mm: Workpiece height mm min / max: 10 - 60 Workpiece width mm min: 60 Workpiece length mm min: 160 Exhaust connection mm: 160 Space requirement approx. L x W x H mm: 5400x1100x1400 Weight approx. kg: 1800 Total connected load kW: Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. Hnsdpfx Aszkk Droa Ejp -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells Hnedpfx Aaszhvyme Esp - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Heating: electric Platen surface: aluminum Hnodpfxjzhm Dve Aa Esp Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 Hodpfxsu Drugj Aa Esnp -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Year of construction: 1994, condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW Hsdpfx Aaeu N Sggo Esnp -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm Hedsu Scpqjpfx Aa Eenp -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg