Used wide belt sanders 1100-1199mm working width for sale (108)

Condition: good (used), Code: 0373 Brand: SBF STEFANI - ITALY Model: 2W 556 - CE Standard Automatic 2-belt wide belt sander for joinery, furniture, custom-made furniture, panels, doors, wooden frames and various – CE Standard Technical data: Max working width 1100 mm Lrodpfxsy Ia Ids Apvjl Max working height 160 mm Min working height 3 mm Abrasive belt length 2150 mm Belt feed speed 5–10 mt/min Infeed and outfeed roller conveyors Automatic table positioning Composition: 1° Calibrating Roller diameter 150 mm 2° Sanding Roller diameter 150 mm Both are height adjustable Automatic belt centring system Motor power 15 Hp Exhaust hoods diameter 150 mm Compressed air 6 bar Overall dimensions mm 1700 x 1850 x 2050 h Weight kg 1650

Condition: ready for operation (used), Year of construction: 1992, Wide belt sanding machine Lrodpfx Ajy N Ur Tepvsl Model RSO-1300 Year of manufacture: 1992 Working width: 1300 mm with roller: 15 kW and pad: 11 kW +brush Feed speed: 10 m/min & 20 m/min

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Lrodpfjknyhlox Apvel Deburring brush: no Motor power: 7.5 kW Extraction port: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Lrjdpfx Asirmg Uspvol Height adjustment: electronic Workpiece thickness display: digital Number of units: 2 1st unit: Helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: Combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on an interchangeable insert and pneumatic on/off of the roller Segmented sanding shoe: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Extraction connection: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be sent on request. Ideal sanding machine for interior fitting companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on or off. Pressure beam segment width 22mm (ideal for lacquer sanding between coats). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grain compensation. Drive motor 11kW. Continuously variable cutting speed 3 – 15 m/s via frequency inverter. Conveyor feed speed steplessly adjustable from approx. 3 to 15 m/min. Workpiece-actuated belt cleaning air blast device. Constant table height approx. 950mm, achieved by adjusting the machine top section. This allows for integration into sanding lines. Feed belt still very grippy and in excellent condition. Conveyor carpet with adjustable vacuum blower, making it possible to securely hold even small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Abrasive belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking system. Extraction ports: 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt cleaning air nozzle, vacuum blower, calibration roller settings, and segmented pad parameters. Thickness measurement system with adjustable material removal, and Enormatic with automatic thickness adjustment triggered by the feed, eliminating the need for constant caliper measurements. Programs for a variety of sanding tasks can be saved and selected via smartselect. CE mark. Operating manual included. 2 sanding inserts included. The four bellows have been replaced. Without the connection cable shown in the pictures. Original paintwork, only minor touch-ups in some areas. Very good condition, from a small workshop. The machine has approximately 1,395 operating hours (about 2 hours per week). Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2,300kg. Includes large mobile storage table at belt height for sanding belt storage. Table size approx. 1520 x 1360 x 950mm. Various sanding belts from K80 to K400 included. The machine can be inspected and demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse – see "other listings from this seller." Ledsyxg N Nepfx Apvorl

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Ledpjvvki Nsfx Apverl Storage location: Nattheim

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lsdpfx Apsvvkipeverl

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Ljdpfxevvkkaj Apvorl Storage location: Nattheim

Condition: used, Year of construction: 1993, used good condition cleaned function tested partially overhauled With 1 / 2 / 3 sanding units: 3 Number of calibration rollers: 2 Roller table at outfeed mm: 350 Automatic workpiece thickness adjustment / scanning Make: Viet Model: Target 321 Year of manufacture: 1993 Machine no.: 371293333 Working width approx. mm: 1100 Passage height approx. mm: 160 Calibration roller units: 1 with air shoe Lrodpfjy Nn Axsx Apvsl Calibration roller power kW: 11 + 11 incl. shoe unit Calibration roller, grooved: 2x Calibration roller, rubber-coated: 2x Diameter mm: 150+220 Combo unit: 1 with air shoe Combo unit power kW: with 2nd calibration roller 11 kW Extraction connection mm: 3 x 160 Space requirement approx. L x W x H mm: 2200 x 2000 x 2200 Weight approx. kg: 2300 Total connected load approx. kW: 23.5 Location: 97447 Gerolzhofen, free loaded, unpacked Handover: Handover in current condition as inspected without guarantee or warranty.

Condition: used, Year of construction: 1995, used good condition cleaned function tested partially overhauled fully adjusted With 1 / 2 / 3 pcs sanding units: 2 pcs calibration roller: 1 pcs combination unit with air shoe / electronic shoe: 1 x air shoe Constant table – consistent infeed height Automatic workpiece thickness adjustment / sensing Programmable control Brand: Kündig - Enorm Model: Duplex 1100 Year of manufacture: 1995 Machine no.: ESG-24384 Working width approx. mm: 1100 Pass-through height approx. mm: 3 - 160 Number of units pcs: 2 Units from above pcs: 2 Belt dimensions l x w mm: 1120 x 2000 Feed speed m/min: 2 - 15 pcs calibration roller: 1 Calibration roller grooved: yes pcs shoe unit: 1 Shoe unit (air shoe): yes Thickness adjustment electric / automatic / with sensing: yes Constant table, consistent infeed height: yes Required space approx. L x W x H mm: 1500 x 1700 x 2000 Lrsdsy Nn Aropfx Apvel Weight approx. kg: 2000 Total connected load approx. kW: 20 Location: 97447 Gerolzhofen, free loaded, unpacked Handover: Handover in as-inspected condition, as seen, without any warranty or guarantee.

Condition: used, Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Ljdpfxjy I Srze Apvsrl Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: Lsdpoy E Iycsfx Apvorl - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, Max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec Feed speeds: 4 + 8 m/min Lrjdpjy Icnasfx Apvol Main sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed belt: 1.3/1.8 kW Operating pressure: 6 bar, air consumption: 10 l/min, extraction ports: 1 x 150 + 1 x 120 mm LxWxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, 90° Shore hardness - Air sanding pad with automatic engagement and disengagement - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by sanding unit - Automatic centering of feed belt - Feed belt with high-quality perforated rubber mat and automatic belt centering - Pneumatic sanding belt tensioning with length compensation - Contactless electronic sanding belt oscillation - Low-wear disc brake system for instant stop of the sanding belt drive with pressure monitor - Motorized thickness adjustment with digital display - Workpiece thickness limiter at infeed - Semi-automatic workpiece thickness adjustment - 4-way grit thickness compensation for contact roller Special accessories: - Workpiece thickness measuring device

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted Lrjdpfx Apoyz Rf Hsvsl – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW Lrodpfxjyz Rtqe Apvol - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) Lodsy Ddp Dspfx Apverl - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Ljdpfx Ajy Hn U Ajpverl Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Ljdpey Dhudofx Apvjrl

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Lrodpfxjy E Rt Eo Apvjl Price

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Vacuum carpet Ledpfxsghymhe Apverl

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 630 mm, power: 9 kW (12.24 HP), Wide belt sanding machine SCM type Sandya Win. Sanding width 630 mm. Equipped with a combination unit for coarse and fine sanding. Electric drive. Operation possible with 16 amps. Transport within Europe available at competitive rates. Ledpjy Ec Eajfx Apvjrl

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 150 mm, type of input current: three-phase, – Made in Germany – Shoes with pneumatic jump (pressure shoe) TECHNICAL PARAMETERS: – Sanding width: 1100 mm – Max. sanding height: 150 mm – Min. workpiece length: 600 mm Lrsdsyyv Aujpfx Apvol – Motor power: 2 x 15 kW – Both units with pressure shoes – Pneumatic pressure shoes – Adjustable shoe pressure – Rubber rollers: 70 Shore – Pneumatic oscillation – Cleaning brush – Feed tables with support rollers – Continuously adjustable feed speed – Feed speed range: 4–13 m/min – Extraction port diameter: 3 x 200 mm – Machine dimensions (L/W/H): 250 x 200 x 210 cm – Weight: ~2500 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW Lredpjwka S Ujfx Apvel with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Motor power: 2 x 15kW Lodsw I U N Ispfx Apverl Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Lrjdexx Uxiopfx Apvol