Exhibition machine
Year of construction: 2020
Equipment and technical data:
2-BAND MACHINE - 1-band roller and 2. d combi-aggregates roller/shoe for solid wood veneer and intermediate lacquer sanding
- Usable WORKING WIDTH mm 1100
- BAND LENGTH mm 1120 X 2150
- MAX. WORKPIECE THICKNESS mm 160
- Steel CALIBRATOR ROLL mm 150
- Rubber coated sanding roller mm 150 mm
- GRINDING SHOE WIDTH mm 50
- BELT MOTOR POWER PS 15
- BAND SPEED m/s 18
- FEED MOTOR POWER PS 0,75
- Variable speed gear Feed carpet ...
sanding wid
1 combi group
7pc2b2m
extension table for input and output
automatic feed centering
pneumatico on off roller
working width: 1100 mm
Ewctrrh
working height: 140 mm
min. Workpiece length:
height adjustment: elektrisch
read out Workpiece thickness: digital
units: 2
1. unit: Kombi Aggregat (Walze - Schuh) mit elektronischen Glieder-schleifschuh
2. unit: Schuhaggregat, elektronischer Segmentschuh
dedusting brush: ja
motor power: 2 x 15kW
electricity: 65A
suction connection: 4 x 200mm
machine length:
machine width:
weight: 3500kg
Bandanzahl : 1
max. Arbeitsbreite : 1100 mm
min. Arbeitshöhe : 3 mm
max. Arbeitshöhe : 170 mm
1. Band : Kombiaggregat
Ausführung 1. Walze : genutete Stahlwalze
Schleifschuh 1. Aggregat : pneumatisch
Schleifbandlänge 1. Aggregat : 1900 mm
Schleifbandbreite 1. Aggregat : 1115 mm
Materialdickenmesseinrichtung : Ja
Steuerung : Handbedienpult
Elek./pneu. Bandoszillation : Ja
Einlasshöhe : variabel (unterer Tisch verfährt)
Tischhub : elektro-motorisch
Tischanzeige : digital
Gewicht ca. : 104...
Bandanzahl : 2-Band
Schleifbreite . 1350 mm
Elektronikschleifschuh
Djdlzc2v
1. Aggregat Walze Stahl
2. Aggregat Kombischleifaggregat
Dickenmesseinrichtung
Vakuumteppich
Lackschlif
je Band einen Motor
Gewicht ca. : 3350 kg
Lagerort: Nattheim
Ott Omegatronic 110 -> wide belt and varnish sanding machine, serviced, adjusted and ready for use I guarantee with my name and as master craftsman
Machine no. 70380
year of construction: 2001
Control Magelis
nominal power 33,6 kW
Bs9vr9y9pu
grinding width 110 mm
2 sanding units
grinding belt dimension: 1120 x 2150 mm
2 feed speeds: stepless 3-18 m/min
1st aggregate: calibration roller 18 mlsek
2nd aggregate: electronic link sanding shoe 3-18 m/sec
Cleaning bilrste
Vacuum carpet
LxWxH: 3,0 x 1,8...
Demonstration machine
Year of manufacture: 2021
Equipment and technical data:
1-belt machine with combi unit roller/shoe for solid wood, veneer and intermediate lacquer sanding.
- Usable WORKING WIDTH mm 1100
- SANDING BELT LENGTH mm 1120 X 2150
- MAX. WORKING THICKNESS mm 160
- RUBBER CALIBRATION ROLLER mm 150
- GRINDING SHOE WIDTH mm 50
- BELT MOTOR POWER PS 15
- BELT SPEED m/s 18/16
- FEED MOTOR POWER PS 0,75
- Adjustment gear Feed carpet with infinitely variable speed m/min 4/20
- HEIGHT A...
- grinding width 1100mm
- grinding height 162mm
-first calibrating unit with a metal cylinder
-second combi aggregate with a shoe and a rubber roller
-trzewik with a jump
Bvodx33lkn
- 11kW main engine
- working pressure 5.5 at.
- machine dimensions 150 cm x 150 cm x 210 cm, machine weight 1.3 tons
Grinding width 1100mm.
Year 1990 / 160 Amp. Total connected load.
Short description
1; Aggregate steel roller smooth D. ca.250mm 37 kW,
2. aggregate rubber roller grooved d. ca.250mm 27 kw,
3. aggregate shoe by whale switch from hand aus-ein.11 kW
All aggregates with light barriers oscillation.
Feed carpet 3 kW speed constant at approx. 7 m/min. Condition sufficient.
Overall condition satisfactory.
Is still in operation until mid July 2021.
Delivery is cleaned and in as-is condition.
Without war...
2 abrasive belts
The grinding machine is in good condition.
With interest simply inquire
Brwuykzmgt
TECHNICAL DATA LIBRA 35 - 110
Working width 1100 mm
Working height 4 - 170 mm
Ooxbv
Sanding belt width 1115 mm
Sanding belt length 1900 mm
Main motor power 15(20) kW (HP)
2 feed speeds 4,5/9 m/min
Feed motor power 0,3/0,55 (0,4/0,7) kW (HP)
automatic centering of feed conveyor
Pneumatic selector for first roller “R” on front panel
- Pneumatic selector for second combined roller “TC” on front panel
- Elastic segmented platen (width 56)
- Electronic control unit FOX 500 KTR
- Electronic device ...
CALIBRATING SANDING machine type SCM CL 110
second hand
carpet in rubber . NEW in 2019
max. working width mm. 1100
machine composed by 2 belts :
Glwmf8t
1° belt : roller in steel diam. mm. 180
2° belt : pneumatic pad
motor power Hp 20 + 15
volt. 380/50
Working width: 1100 mm
Working height: 170 mm
min. workpiece length:
Height adjustment: electric
Display workpiece thickness: digital
aggregates: 1
Jx8ovypx
1. aggregate: combi aggregate (roller - shoe) with elastic link grinding shoe
Control: Version Y, Fox 500
Dust removal brush: no
Engine power: 11kW
Suction connection: 200mm
Machine length: 1820mm
Machine width: 1650mm
Weight: 1170kg
Machine type CCCT+CCCT, in good condition, the machine bears the CE label, automatic, flow processing machine, with through-going feeder in machine, works above the item, works beneath the item, working width 1100 mm, sandingbelts 1150 x 2620 mm, feeding with infinitely adjustable speed, with 6 rollers, 2 with steel, 4 with rubber SH 80, (roller no.3 brand new SH 60)2 sanding rails, with rotating brush cleaner, calibration of item
Bu9x9c33dv
Code: 0399
Brand: SML
Model: RUBINO RRR - CE Standard
Automatic calibrating sanding machine with 3 belts (Roller + Roller + Roller) for veneer, wood panels, furniture, custom furniture, composite materials, and various - CE standard
Technical data:
Working width mm 1100
Max working thickness mm 160
Min working thickness mm 3
Gxusrc2
Abrasive belt lenght mm 1900 x 1130
Power 1° motor Hp 12,5
Power 2° motor Hp 7,5
Belt feed speed 6/12 mt/min
Composition:
1° Group calibrating roller
2° Gr...
with "R" unit with roller and second
"CS" combination unit with roller/sanding shoe
working width: 1.100mm
Min./max. working height: 4 - 170mm
sanding belt dimension: 1.115 x 2.150mm
Main engine power: 11 kW
feed speed: 4,5 / 9m/min
-Rubber-coated calibration roller
-Rubber-coated grinding roller
-Hard grinding shoe
-electronic amperemeter for the main-
motor for indicating the current consumption
-Electronic display of the working height
-Electronically controlled grinding belt
oscillation
-R...
WARRANTY FROM SCM GROUP PRODUCER OF THE MACHINE
FOR 12 MONTH
working width 1100 mm
min max working height 4-170 mm
sanding belt width 1115 mm
sanding beld length 1900 mm
2 feed speed 4,5 - 9 m min
2 operating units
main motor 15 kw
First operating head: Grooved steel contact roller ø 120 mm with micrometric height adjustment
Second operating head combined calibrating/sanding head including:
Rubber coated contact roller ø 120 mm, 45 Sh with micrometric height adjustment
Platen made of an ext...
-Working width 1100 mm
-Two aggregates driven by one engine
-1 calibrating roller
G9eeohpyk
- combi aggregate with viscera, automatically or manually controlled
-2004 year
-Weight 1133kg
-CE
Powerfull 5 cylinder (3 top, and 2 bottom) Calibrating / sanding machine.
Machine suitable for calibrating / sanding operations on top and bottom panel surfaces with only one passage.
Working width: 1150 mm
Ba7cg333io
Max./Min thickness opening 3-160 mm
Working level 1000 mm
Feed speed 5-25 m/min
Main motors power: 5x11 KW
Total engines power: 63 KW
Weight 7600 kg
The machine was used for table tops calibrating (grinding). Machine is after a full technical renewal, now is in perfect technical...
WIDE SANDER Casolin made in Italy
grinding width 1100 MM
1 calibrating unit with roller
2 aggregate with shoe
2 feed rate
electric adjustment of the table
display of table position
11KW engine driving both units
Bnyuy7z
conveyor belt in very good condition
machine tested, working in very good condition
CATALOG NUMBER 6145
TECHNICAL DATA
- max workpiece width 1100mm - max workpiece height 140mm
3 aggregates:
1) grooved rubber roller for 15kW calibration
2) grooved rubber roller for 11kW calibration
3) grooved rubber roller for 11kW calibration
in advance:
- metal skid roller
- rubber skid roller
- aggregate
- 2 rubber rollers, sliding
- aggregate
- 2 rubber skid rollers
- aggregate
- rubber skid roller
from down:
- feeding table 3600x1000mm
- feed speed adjustable on the inverter 0.25kW
- pull...
Type SCSB-1100. Plaster width 1100mm. Equipped with 2 sanding belts, coarse and fine polishing unit.18,5 kw and 11kw. Can also be polished with veneer. Modernized with electronic oscillation of the sanding belts instead of compressed air. Digital reading of grinding height. Stepless feeding. Lots of sanding belts included, 15 cartons with 10 belts in each. Works perfectly.
Busjwnkl97
We arrange shipping for all countries.
TECHNICAL DATA LIBRA 35 - 110
Working width 1100 mm
Working height 4 - 170 mm
Sanding belt width 1115 mm
Sanding belt length 1900 mm
Ytspf0
Main motor power 15(20) kW (HP)
2 feed speeds 4,5/9 m/min
Feed motor power 0,3/0,55 (0,4/0,7) kW (HP)
automatic centering of feed conveyor
operating head: Grooved steel contact roller ø 120 mm with micrometric height adjustment
- Pneumatic cylinder for activation
- Micrometric adjustment of the working height
1 machine (from below)
3 rolls wide belt sander
Fabr. Viet
Model. VALERIA ICCC INF 1100
Year 2000
roller 1. 21,3 kW
Bumlldz8vg
Roller 2. 11 kW
Roller 3. 11 kW
feed speed 3,7-20,3
with vacuum table
2 machine (from top)
3 rolls wide belt grinding machine
Make Viet
Model. Challenge 331 TM
year 2000
1 roller 18,5 kW
2 roller 11kW
3 roller 11kW
working width. 1100mm
Feed speed.3,7 - 20,5m/min
Motor. 1,5 kW
with vacuum table
CASADEI Libra 35 - Wide belt sanding machines in double belt design
Technical data
sanding width 1100 mm
Min. / max. working height 4 /170 mm
Sanding belt width 1115 mm
Sanding belt length 1900 mm
feed speed 4,5 / 9 m/min
Feed motor 0,33/0,55 kW
Motor power table adjustment 0,25 kW
Xqxom3jac
Power drive motor 11 kW
Electrical voltage 400 V
Phase(s) 3 Ph
Mains frequency 50 Hz
Length 1650 mm
Width/depth 1820 mm
Height 1960 mm
Illustration with optional equipment
Wide belt sander as double belt ve...
Technical data:
Buvghgxw
Working width: 1100 mm
Sanding belt dimensions: 1120x2150 mm
Max working height: 160 mm
Calibrating steel roller with a diameter of 150 mm
Rubber roller with a diameter of 150 mm
Sanding pad width: 50 mm
Common motor power of 2 grinding aggregates: 11 Kw
Speed of sanding belts: 16/18 m / s.
Feed motor power: 0.55 kW
Infinitely adjustable feeding belt: 4-20 m / min
Worktable motor power: 0.25 Kw
Pneumatic shoe for jump / jump: YES
SCM Sandya 5 S
- grinding width 110 cm
- the first steel calibration unit, 11kW
the second combo rubber + 7 kW boot
- 2 speeds of sanding belt on the second sanding belt
J2azzzcb
-2 speed belt feed
The machine is in very good condition.
Wide belt sander SCM Sandya 5 RCS 110
Btp9j2ij8k
working width 1100 mm
working height 150 mm
two aggregates
1. sizing roller
2. Combination unit with viscera
the viscera is shot automatically
driving engine with power 7,5 kw
weight of the machine: 1200 kg
CE-marking
WORKING WIDTH 1100 MM
Ns8e9
MAIN MOTOR 11 KW
1 SANDING BELT COMBI UNIT
Automatic centering of feed conveyor
Wide belt sander
make Levigaltecnica
K939j97z
type S2RTN/Y110
year 1993
working width 1120 mm
Pneumatic pressure on roller
Pneumatic pressure on shoe
with 1 x roller 15 Kw
with 1 x shoe 15 Kw
with 1 x brush
WIDE BAND SANDMACHINE, 2 AGGENATES, CONTACT SHAFT AND SHAFT WITH COIL, SANDMACHINE Bottom drive shaft motor 15 kW, motor with coil 7.5 kW, smooth feed regulation
Dgmrm99
OTT EU 110 WS Wide-Belt Sander
- machine in stock
- after the technical review
- very good condition
- year of production 1995
- German production
- CE marking
TECHNICAL PARAMETERS:
grinding width 1100 mm
grinding height 3-160 mm
pneumatic oscillation
electric height adjustment
pneumatic straps tension
1 unit - rubber roller
Bt2hucljll
shaft diameter 160 mm
90 shore hardness
2 aggregate - combo shoe
rubber shaft
90 shore hardness
pneumatic shoe
possibility of grinding with a shaft / shaft wi...
Broadband sander
-width 110cm
Br3ffpztor
-two aggregates
-2008 year
-weight 2500 kg
The machine is in perfect position, little used,
heavy wide belt calibrating fine sanding machine
1. combined contact rollers + electronic sanding shoe unit 15 kW
2. electronic sanding shoe unit 11 kW
3. cleaning brush unit 0,55 kW
Bskj9v0yb8
working width 1100 mm
LED digital displays for workpiece setting
clear operating panel for control
all work settings and easy operation
1100 MM SANDING
Suv0zo
MOTOR 15 KW
2 GROUPS
I sell the bottom sanding machine Costa A1 CCT 1150, year 2003.
Configuration hard rubber cylinder - soft rubber cylinder - electronic segmented pad.
Bg3dwxso
Working width 1150mm
Bands 1180x2620mm
Pressure rollers for short elements.
Ventilator for vacuum underpressure.
Air-blow on both units.
Total weight 3300kg
2 motors
Condition LIKE NEW ! The machine was working only a few.
Available immediately.
I sell bottom grinder Costa A1 ACT 1150, year 2001.
Cylinder configuration with soft electronic segmented pad.
Working width 1150mm.
Belts 1180x2620mm
Press rollers for short work pieces.
O9fq2
Fan for vacuum.included.
Air blower for both units.
Total weight 2500 kg.
2 motors 7,5 kW and 15 kW
total power 27 kW
Very good condition, serviced machine.
Available immediately.
CATALOG NUMBER 6057
TECHNICAL DATA
- max width of the workpiece 1100mm
- max thickness of the workpiece 160mm
*in advance:
- 3 metal skid rollers
- a rubber grooved roller for calibration + a shoe (additionally, a shoe with a pneumatic clamp is included) + a metal cylinder
- metal skid roller
Oyrwn
- cleaning brush
*from down:
- 2 metal skid rollers
- pulling tape
- oscillation of pneumatic straps
- electric table lifting
- smooth regulation of the feed speed
- 0.75kW feed motor
- 12.5kW main en...
Width 1100mm
Composition: 2 strips
Efkinxp7g
380V
WIDE BELT SANDER
OTT
Type: Megatronic 11
B.j: 1996
2 sanding units
grinding width 1100 mm
Izgjgbh
OTT ALPHA 110 wide-belt sander
- machine in stock
- after the technical review
- very good condition
- German production
- year of production 1996
- segment shoe - a perfect solution for varnish / veneer
TECHNICAL SPECIFICATIONS:
- grinding width 1100 mm
- grinding height 1-150 mm
- combi unit with task-controlled membrane sanding shoe
- engine power 11 kW
- blowing on the belt
- pneumatic oscillation
- two types of belt speed 4.5 and 18 m / s
- aggregate with felt roller
- engine power 0.75...
Working width 1150 mm
N. 2 Bottom spindle 22 KW (30 hp)
N. 3 Top spindle 22 KW (30 hp)
Vacuum feeding floor
Front and rear support roller, ideal for parquet strips
Motorized brush in the exit
Bitasakpq8
Entry and exit roller conveyor included
Motor data: 380 V - 50 Hz - 62 A
2 grinding units
Burste
electric height adjustment
grinding width: 1100 mm
operating pressure: approx. 8 bar
grinding belt length: 2150 x 1130 mm
weight: approx. 3500 kg
dimensions: W/D/H approx. 2100/2500/2300 mm
D899lu2wo
