Used Sanding Table for sale (18,155)

Year of construction: 1977, condition: excellent (used), I sell the bottom widebelt sanding machine Butfering FBS2 1100, year 1977. Hedpfedv N R Usx Aitofn Configuration sanding pad - pad. Working width 1100mm. Total weight 4000kg Suitable for line. Construction with fixed working table height.

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. Hjdpfx Aofyadbjitjfn In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 590, type of input current: three-phase, table length: 1,000 mm, overall weight: 480 kg, height adjustment type: hydraulic, input voltage: 400 V, grinding belt length: 3,200 mm, grinding belt width: 200 mm, input frequency: 50 Hz, The HOUFEK HB 1000 edge sanding machine, manufactured in the Czech Republic, is designed for sanding solid wood and wood-based materials. This machine is ideal for carpentry workshops, suitable for processing the edges of furniture components, moldings, fronts, and other wooden products. The table with adjustable inclination allows for sanding at an angle, and the additional workstation on the opposite side of the belt increases the machine's capabilities. TECHNICAL DATA: – Manufacturer: HOUFEK, – Model: HB 1000, – Country of manufacture: Czech Republic, – Year of manufacture: 2006, – Serial number: 590, – Power: 3 kW, Hfodpjz S Ed Uefx Aiton – Power supply: 400 V, three-phase, – Frequency: 50 Hz, – Rated current: 6.6 A, – Machine weight: 480 kg. CATALOGUE PARAMETERS OF THE MODEL: – Sanding belt width: 200 mm, – Sanding belt length: 3200 mm, – Dimensions of the work table: 1000 × 400 mm, – Table inclination range: 0–45°. The above catalogue dimensions require confirmation by measurement for the offered unit. EQUIPMENT: – Work table with adjustable inclination, – Additional table on the opposite side of the belt, – Guide with adjustable angle and scale, – Manual adjustment knobs, – Guards for the sanding unit, – Connections for connecting a dust extraction system, – Emergency stop switch. We issue a VAT invoice. Transportation can be arranged for an additional fee. You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Hsdpfxez Nxmko Aitefn Weight: approx 7 T

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg Hjdpjy Iu N Asfx Aitofn — Immediately available —

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with a veneer edge sanding side and a solid wood sanding side. 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection is necessary Drive motor 400V / 3kW Front work table for sanding veneer edges with a stop guide rail (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-mounted table, height-adjustable and can be positioned to the side Angle stop Rear, adjustable work table for sanding solid wood Both tables are height-adjustable to utilize the entire sanding belt Belt dimensions 3000 x 200mm Side extension table for radius sanding on the 150mm belt roller Hfedoz I T Apepfx Aitjn Feed support holder 68mm Central dust extraction connection 140mm Very stable chassis, 2 swivel castors, 2 steering castors and a lever brake for locking CE marking All graphite pads and dust extraction hoses have been replaced Original paint, only touched up in some areas Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this provider".

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available - Hfedpfjzbyt Eex Aiton

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Heded R Ev Djpfx Aitsfn Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: - Table size: 2,800 x 950 - Motor: 5.5 kW Hsdpfszryx Ujx Aitofn - Belt width: 150 mm

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Hedpsd E Ixzjfx Aitofn • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Code: 0494 Brand: DM ITALIA Model: 410 Automatic calibrating sanding machine with abrasive roller for wood, carpentry shops, furniture, custom-made furniture, windows and doors, panels, and various items - CE Standard Technical data: Max sanding width 405 mm Max sanding height 80 mm Min sanding height 2 mm Roller rotation speed 1440 rpm Belt feed speed 0 to 3 mt/min Hfjdpfx Aoz Izg Aeiton Belt length 2420 mm Belt height 78 mm Fixed table dimensions 850 x 410 mm Single-phase motor (220 V): 1100 Watt Overall dimensions mm 1000 x 850 x 1100 h Weight kg 90

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling - Motor power: 1.5 kW Hedpfx Aezryxhoitofn - Extraction connection: 100 mm

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Hedpoylp A Djfx Aitefn Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Hjdpsuxqzuefx Aitofn Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked Hfsdszkvd Repfx Aitsn - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70! Hfedpfehtuvrex Aitjn

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Hfjdpfxjv Sk Nne Aitsn Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Hfsdpefig Rwjfx Aitsn Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: not inspected (used), functionality: unexamined, total height: 880 mm, total length: 3,000 mm, total width: 1,500 mm, table width: 1,500 mm, overall weight: 2,500 kg, hole diameter: 30 mm, table length: 3,000 mm, Spot welding table FCA D-35614 Aßlar – loaded onto a truck. Hodpfx Aoz Spwljitefn

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Hfsdpfx Ajtt Da Deiton (Inquiries will only be answered with your address and telephone number).

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window Hfedpfey Ehiwox Aiton 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Hfjdpfstddw Aex Aitjn - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Hedelht H Nepfx Aitefn Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Hfodpfx Aijy Naq Usten Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: new, Edge sanding machine KSO 1505 Holzkraft -Exhibition machine- - Dust extraction port diameter: 100 mm - Work table length: 900 mm Hodpfx Aevxkv Ueitofn - Work table width: 305 mm - Work table height adjustment: 120 mm - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Maximum sanding height: 170 mm - Swivel angle of sanding unit: 0 – 90 ° - Maximum workpiece width: 1010 mm - Maximum workpiece height: 150 mm Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg -1x sanding belt 2750x150mm, grit 80 -1x sanding sleeve Ø38mm, grit 80 -1x sanding sleeve Ø50mm, grit 80 -1x sanding sleeve Ø75mm, grit 80 - New exhibition machine -