Automatic sanding machine for sale
Your location was not identified (Edit)
1 GRINDING AUTOMAT, TYPE IKSA 8 WaLZE
grinding width 2 . 600 rrm
consisting of :
Transport bed with individual transport belts, including a conveyor belt.
blasting device, drive by three-phase motor, feed speed in the range of 5 25 m/ min. frequency controlled, working speed 8 m/ min, working height constant 920 mm, adjustment to thickness (3 80 mm) by height adjustment of the entire machine head, incl. integrated
1 longitudinal grinding unit with contact roller for calibration work (steel), bal...
Automatic Milling Machine with Sanding Machine Hempel
type: FS 40
Milling diameter max. 70 mm
Working length 140 bis 400 mm
motor 5,5 hp ; 2800 rpm
special motor 0,35 hp infinitely variable motor
hydraulic motor 2,0 hp
1 router on the machine
Gmz8zu2vo
The output depends on the shape and the workpiece and varies between
200 – 300 pieces per hour.
Work run:
1. Automatic clamping of the workpiece
2. Router is routing by camshaft along a model
3. The workpiece runs over a chain track to he sandi...
Modular drilling and milling machine GOMAD Automatic Drilling Machine AWL 2G-6B-2C
Automatic drilling machine AWL 2G-6B-2C
Automatic Drilling Machine, Modular Drilling Machine GOMAD AWL 2G-6B-2C
Type / Model: AWL 2G-6B-2C
Production Year: 2008
Technical condition: Good
Technical description:
The AWL-2G-6B-2C drilling machine is designed to make holes for pegs and handles in wooden strips, chipboards or wood-like material. It has 2 upper, 6 side and 2 front units, a material feeder and a system ...
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Zthyl0f7
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- Shield Ø...
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
LJ308A
-new machine
Bhhx2keocu
Age: ca. 1960 // Power: 4‘500 sheets / h
Format: 32 x 44 cm
Xb8aj0od
Videolink is from an identical machine.
AUTOMATIC CALIBRATING & SANDING MACHINE
GENERAL SPECIFICATIONS
* Industrial machine with heavy-duty structure
* Machine condition: very good
* Useful working width 1.350 mm
* Min. / max. working thickness 3 / 160 mm
* Width / lenghtways of sanding belts 1.370 / 2.620 mm
* Automatic belts oscillation
* Oscillating blowers for the cleaning of the sanding belts
* Revolver system for a facilitated regulation of the working units
SYSTEM AND OPTIONALS OF THE PANEL HANDLING
* Worktable with fixed heigh...
Can be used for filling oil and varnish.
Cueopz3k
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and board
shi...
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
straightening unit
sheet width (max) 350 mm
sheet thickness (max) 10 mm
number of levelling rolls 5
diameter of levelling rolls 100 mm
distance of levelling rolls 77.5 mm
feeding rolls 2 x 2 pc.
with loop control
Q9shwhb7
coil cradle
sheet width (max) 330 mm
max. outer diameter of coil 1300 mm
length appr.: 4900 mm
width appr.: 1820 mm
height appr.: 2030 mm
weight appr.: 2500 kg
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from being damaged...
LEO R
Fully automatic, digital single-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Automatic operating system
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all stages between -22.5 °C and + 45 °C with servo motion system
- Batch processing and precision cutting
Muwcmk
- Programming process and large memory
- remote access
- Data transfer via Ethernet and USB
- industrial...
Automatic single-headed saw, blade Ø 500 mm + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
Iwqqn3br
- Safe cuts thanks to the cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 45 °
- Speed control based on the type of cut profile
- Horizontal and vertical pneumatic clamps
- Rip cutting of profiles 180°, distan...
Radial automatic single head saw LEO X with servo
As standard:
- 550mm target
- refrigeration system
- digital conveyor right 1pc
- automatic positioning of any angle between 30-90
degrees
- hydro-pneumatic cutting depth setting
- 3kW engine power
- cutting zone cover
- horizontal pneumatic clamps
Bhm0dpjn2c
- data transmission over the network, Ethernet, USB
- PC (IPC) HMI touch screen
Options for a surcharge:
- vertical pneumatic clamps
- chip extraction
- left-hand conveyor
- barcode printe...
METEOR I 420
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
⦁ Hydropneumatic cutting
⦁ Safe cutting thanks to safety sensor cover
⦁ 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
⦁ Can be cut in any intermediate angle between - 45 ° to + 45 °
⦁ Speed adjustment depending on the profile to be cut
⦁ Horizontal (2pc) and vertical (2pc) pneumatic clamps
STANDARD EQUIPM...
METEOR II 420 - longitudinal cutting 180° possible
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
Bhlyju7hru
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 45 °
- Speed adjustment according to the type of profile to be...
GEMINI IV SA
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
Bhmgw9zmsa
- Cutting capacity of 4000mm and 6000mm profiles wi...
GEMINI V R - disc extension up to 185mm
Fully automatic, digital twin-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- slice function
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo system
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- Touch control p...
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT THE TYPE OF...
GEMINI VI
Automatic, digital twin-headed, 2x Ø 600 mm automatic angle saw blade
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo motion system
- Adjustable disc extension
Ixcmuntn
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 410mm to 5050mm (between heads), max. profile length in load...
GEMINI X (disc extension up to 418mm)
Automatic radial bi-head cutting-off saw,
2x Ø 550 mm blade with large cutting range
APPLICATION:
For cutting aluminium, plastics
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all steps between 30° and 90° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 450mm to 6000mm (between heads), maximum profile len...
GEMINI - II A
Semi-automatic, digital twin-head cutting-off saw, 2x blade Ø 400 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts with a cover
- Manual positioning on all steps between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Automatic calculation of the cutting length
Iyjeni9p
- PLC control system
- Save dimensions
- Touch control panel
- Automatic horizontal and vertical clamps
STANDARD EQUIPMENT...
APEX II
Automatic double-headed hydraulic compactor
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
S38k2p
- Hydraulic operating system
- Manual positioning, automatic operating system
- Adjustable clamping system for wide profiles
- Easy adjustment of clamping blade distances based on the profile
- Two-stage hydraulic pressure setting
- Assembly without size changes in the corner assembly processes
- Crimping profiles...
APEX IV
Automatic four-head hydraulic crimping machine for aluminium profiles used in the production of window and door joinery
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
Bhmy9nlfdj
- High pressure resistant steel work table
- Automatic positioning with servo control
- Touch screen
- Adjustable clamping system for high profiles
- Profile-based adjustment of kneading blades
- Hydraulic operating system
- Two-stage hydraulic pressure setting
- Safe working a...
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
I3evexb
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC cont...
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst...
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and lewegp pr...
VEGA - II
Automatic single head saw, blade Ø 400 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic safe cutting process
- Horizontal and vertical pneumatic clamps
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Can be cut in any intermediate angle between
-45 ° to + 45 °
- Impact-resistant cast iron core
- Cutting speed adjustment based on the type of profile to be cut
STANDARD EQUIPMENT
- Service ring wrench
- Disc Ø 400 mm
Dbjafygvq
- ...
Serial No. 1864
Sexl3aut
Capacity 60mm x 600mm
Length 900mm
Width 1100mm
Height 2170mm
Nett weight actual. 250 Kgs.
Technical characteristics
Variable advanceHigh digital displayRoller table extentionHigh finition sandingCommand stand
Industrial fiber brushing machine
3 motors, 3 Rollers Ø250 NYLON, HARD / Medium / Smooth.
FLADDER brush in exit.
Bo2c7p972w
Slope conveyor.
Ideal for brushing, structuring, defibrate, aging and cerusing (white lead). Number of sanding groups: 3 Useful width: 1350mm Roller diameter: 250 mm Advance speed: 3 - 15...
Vibra filling installation is a dosing machine with weighing function suitable for powders and granulates.
By means of a vibration chute an even product flow is created, which is filled on the weighing bunker or scale. The vibration chute and the product hopper are made of stainless steel 304 and are easy to remove for cleaning.
The construction of the vibrating chute and hopper are completely smooth. The Vibra dosing machine is extremely suitable for the filling of refined seeds, sports food, ...
2007 - Heidelberg Stahlfolder KH 82-4 KZR/L (Ref.No. 1000841)
Equipment:
- Motorized Combination Buckle Plates
- Automatic folding roller adjustment
- Machine Control System MCT
- Right-angle folding unit KZR/L 78
- Noise Hoods
- 1 st station - 4 buckle plates BUH 82.4
- Counter
Bkal0crwsr
- Round-pile feeder RFH 82
no pumps
used machine, functional.
Incl. accessories according to photos + belt filter system
Bnket8l7ec
without warranty
Folding machine Eurofold 435 STA 4 pockets Automatic
Production Multigraf, Switzerland. This is one of the latest Eurofold models.
Four-pocket machine, working format 35 × 65 cm. Standard folds „Z” „C” „half” „twice in a half” „altar” etc.
Feeding from the elevator – high pile. This allows the machine to be operated by one person.
4 pockets set up automatically from the desktop.
The machine is ideal for pharmacy due to the low column of about 20mm.
Automatic blanking of pockets.
Perfect conditio...
width 56 cm
Cvi0hzwe
age 2006
automatic pocket setting
automatic roller setting
rotary feeder RFH
1. station: 6 folding pockets 56 cm
following knife shaft
noise absorbing hood
2. station: 4 folding pockets 56 cm
upstream knife shaft
following knife shaft
noise absorbing hood
window folding pocket
control unit ACC 2.4
vertical pile delivery VSA 66
Delivery time: immediately from stock
2 posts, motor 1,5 kW, aspiration 2.2 kW/2400m3/hr.
Dpjicbn
* 27 ” (686mm)
* Feed Speed 60 m / min
* Conversion to a new knife arm system
* Conversion to new feed rollers with changeable teeth
* Pneumatic feed rollers and knife pressure
* Incl. Feed motor (45kW) and rotor motor (75kW)
N00dz
2005 - MBO K 800-6 S-KTL Automatic (Ref.No. 1003347)
Equipment:
- Navigator-Control
- Noise Hoods
- 1 st station - 6 buckle plates
- Pallet feeder
- Cross fold
no pumps
Vtblwu
Standard slat width: 50mm, slat length: 335-4100mm, connected load: 1kW, compressed air supply: 6bar, length: 10,500mm, width: 900mm, height: 1840mm, machine was overhauled, documentation available.
Ptxir3
Foodtools CS1000 automatic single station round cake
Bj8doobuxx
Numeric control 3 axes
Manufacturing origin Swiss
TECHNICAL DATA
Automatic or semi-automatic watch pearling machine
Cast iron machine base, the table is mounted to THK’s linear rail, (Star) ball screws are driven by stepping motors, 800 steps per rotation the machine is equipped with our own ERI CNC control , 17 programs can be kept in the control or transferred to a PC by RS232 connection.
Semi automatic : the spindle is lowered manually, when it moves back in its upper position, the tabl...
2009 - MBO K 800-6 S-KTL "Automatic" (Ref.No. 1001584)
Delivery: Immediately
Equipment:
- Automatic buckle plate adjustment
- Automatic folding roller adjustment
- Navigator-Control
- Super KTL Version
Bjxxy890ik
- Noise Hoods
- 1 st station - 6 buckle plates
- Pallet feeder FP 800/120
- Knife x 2
- Cross fold x 2
- Automatic Format Setting on feeder
no pumps
Belt sander FLOTT type TBSM 75
belt length 1000 mm
belt width 75 mm
Belt speed approx. 7 m/sec
surface grinding table 280 x 80 mm
Engine power 0,37 kW
Engine speed 1370 rpm
mains connection 400 Volt, 50 Hz
Contact disc/drive disc Ø 100 x 75 mm
- Abrasive belt tension via handwheel
- Treadmill adjustment via hand wheel
Space requirement L x W x H 530 x 370 x 200 mm
Bhulqhwpfc
Weight 24,5 kg
used, top condition
partly revised,
cleaned, function checked,
Mvledw
test run, compl. adjusted,
sanding pad planned and new coated,
strip deflection roller new ball bearing,
conneting cable new,
manufactured by Vertongen
type SO 2
built in 1991
Masch.-No. 290991
GS-wood dust approved
number of band aggregates 1 piece
sanding width ca. 300 mm
sanding height ca. 180 mm
combined aggregate
belt oscillation mechanical
frame support
feed speeds 2
height indicator- digital display - mechanical SIKO
fi...
Number of sanding units 6 St.
sanding width 150 mm
Sanding height max. 120 mm
Condition: new / unused
LÖWER Finish and intermediate grinding machine Leistomat LZ 6
For finishing (smoothing, de-fading and edge breaking)
Or intermediate grinding of profiled window frames
- Finish and intermediate grinding machine with six grinding-
lamellar aggregates,
1 surface units at the top, 4 profile units with
1 surface units at the bottom
4 profile units with oblique arrangement on the top right,...
Type: KSM 8 CSD - Condition: function tested, very good, second-hand - Year of construction: 1993 - Working width 1300 mm - CNC-controlled machine adjustment with program memory - CNC-controlled selective pressure control system - Cross sanding unit with blasting device - Longitudinal sanding unit with infinitely variable speed and blasting - Calibrating roller can be used via control system - Satin finishing roller unit - Brush unit - Vacuum conveyor belt
Juj00gk