Used turning automatic lathes for sale (228)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Hsdjyn Imyopfx Ahvofd Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck Hedpfx Aoyh Ivlohvsfd

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 Hedpfxeyh Hkzj Ahvsfd - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 6060304, overall weight: 10,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 2,400 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A - Maximum fuse: 63 A - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm Hfsdpfx Ajyh Hgcehvod - For clamping device diameter: 49 mm - C-axis max. speed: 8000 rpm - Max. stroke: 305 mm - Upper turret X/Y/Z and H-axis: 10 tool stations with dual drive - Lower turret X/Y/Z and H-axis: 9 tool stations with total drive and separate sub-spindle drive - Sub-spindle including partial hollow clamping - Max. clamping diameter: LW 32 mm: C-axis, speed: max. 8000 rpm - Flushing unit mounted on the lower turret - Part length: max. 350 mm - Diameter: max. 32 mm - Incl. chip conveyor and coolant system from manufacturer RESY as well as a bar feeder from manufacturer FNB, type: TURBO 3-36 - Incl. all tools and tool holders shown in the photos Note: The item must be collected definitively between 01 and 02 April 2026 at an exact date to be agreed. FCA D-79115 Freiburg – loaded onto truck

Condition: used, Year of construction: 2012, operating hours: 7,200 h, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Hfsdeyt H D Iepfx Ahvsd Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: used, Year of construction: 1997, machine/vehicle number: IntNr230982, used CNC long lathe Citizen L520, year of manufacture 1997 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar diameter max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Loading magazine FMB Turbo 3-26 Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Hedpfxeyt Hvde Ahvefd Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information and prior sale! CNC sliding headstock lathe Citizen L520, year 1997 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazines Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as before sale!

Condition: excellent (used), Year of construction: 2020, operating hours: 7,341 h, functionality: fully functional, CNC Swiss-type automatic lathe Make: STAR Model: SX-38 Type A Year: 2020 Equipped with: FANUC 31i Model B5 control, synchronous spindle, powered tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), independent back machining (8 stations), turret, swarf conveyor and swarf trolley, parts conveyor belt, fire extinguishing system, oil mist extraction, JBS guide bushing unit, can be used as both long and short turning machine, high-pressure pump, bar feeder FMB TURBO 5-65 Hfedpfxjx Sx T Te Ahved

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, Hfsdsytq Ahopfx Ahvod driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: used, Year of construction: 2016, Technical details: Number of axes: 8 Hodsytp Rqopfx Ahvsfd Max. machining diameter: 32 mm Max. headstock stroke: 600 mm spindle speed: 8500 min-1 workpiece diameter: 32 mm workpiece length: 240 mm X-axis : 70 mm y-axis: 405 mm z-axis: 100 mm number of tools: 22 Main spindle capacity: 7,5/5,5 kW : 2,2 kW weight: 3,5 t

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes Hfsdpfx Ahsytcaljvsd

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA Hsdpfx Asytx Skshvjfd weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!

Condition: used, Year of construction: 2005, functionality: fully functional, TECHNICAL DATA Spindle Head Max. bar stock diameter (mm): 13.0 Material quality (DIN 671) (mm): Ø Xh9 Collet chuck, selectable: Through-bore Guide bush, selectable: Through-bore Max. turning length / spindle stroke: • with fixed guide bush (mm): 130 • with rotary guide bush (mm): 80 • with programmable guide bush (mm): 80 Spindle speed (rpm): 12,000 C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2/Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Drive for Tool Carrier 1 and 2 Speed (rpm): 0...8000 Max. driven tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Unit Max. bar stock diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 | 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed (rpm): 12,000 C-axis electronic resolution (deg): 0.001 Rear Tool Unit, Slide/Fix Stroke Z, slidable with working spindle (mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Hjdpfxsyr N Dzs Ahvefd Rear Tool Unit (X4-axis) Stroke X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Tool Drive for Rear Tool Unit (with X4-axis) Speed (rpm): 0...10,000 Max. driven tools (number): 4 Clamping diameter for drilling tools: • driven (mm): 0.5 - 7 • stationary (mm): 0.5 - 10 Coolant System Pump pressure single stage (bar): 3 120 bar pump for front/rear unit Tank capacity (l): 180 Delivery rate (l/min): 40

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional equipment • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders Hfodpfxjyr Nflj Ahvod • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Technical Specification Counter Spindle No

Condition: used, ESCO ESCOMATIC D 6 SR is an Automatic lathe engineered for precision machining, high accuracy and reliable production. Capacity: diameter of work admitted 6 mm; with flat cames max turning length 62 mm; spindle hole 6 mm. Specifications: 3 spindle speeds from 2400 to 6000 rpm; 3 tool cutters; turret slide/revolver 1a (D6-8-Mp 103/a) with 4 tools; voltage 60Hz 220/440 V; total power 2.5 CV; machine weight approx. 1150 kg; footprint L1500 × W1000 mm. Key equipment: turret (D6-8-Mp 103/a) and cam disc. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Hfedpfx Ahsyr Hgmoved

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 2200 kg Measurements height 1752 mm Hfodex D Ic Eepfx Ahvsd Dimensions Machine Length 2120 mm Main Drive Spindle Speed 8000 RPM This Citizen A20 7PL was manufactured in 2009. It features a max turning diameter of Ø 20 mm and a length of 55/200 mm. Spindle speeds reach up to 8,000 rpm with 21 tool stations and rotary tools at 6,000 rpm. Includes an Iemca Boss 332 E/R bar loader. Dimensions are 2,120 x 1,226 x 1,752 mm, weighing 2,200 kg. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1270 mm Measurements depth 2630 mm Measurements height 1580 mm Machine weight 2500 kg Control Unit Brand FANUC Hedox D Sccopfx Ahvjfd Model na Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5 kW Number of axis 6 This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for tact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Hfedpfxox D I Axj Ahvsd Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Application Types Turning Hfjdpfx Ahsx D Nhpevsd

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg Hfjdpfx Ahsx D Nfujvod This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,797 h, Control Unit Brand FANUC Model 21i-TB Additional Equipment Door monitoring / Spindle clamping device for the main spindle / Main spindle indexing 15° (not applicable for 480S) / Work light / Disconnect switch (control current: 30mA, available as an option for 480A) Tool set This Star SB-16 was manufactured in 2005. It features a robust FANUC control system, separate coolant tank, automatic central lubrication, and a 6-station tool holder. Ideal for precision turning, it includes a 4-spindle drill holder and a comprehensive workpiece removal system. Consider the opportunity to buy this Star SB-16 swiss type turning machine. Contact us for more information. Application Types Turning Hjdpox D Sm Ujfx Ahvofd

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Model Series Oi-TD Hodpsx D Iq Aofx Ahvsfd Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 3040 Measurements depth 1370 Measurements height 1820 Machine weight 3300 Main Drive Spindle speed range 200 - 8000 Number of axis 6 Workpiece Workpiece drm 32 mm Workpiece X 320 mm Additional Equipment Complete with bar feeders, manuals, and CE conformity declaration This 6-axis Citizen C32 VIII was manufactured in 2005. Ideal for precision swiss type turning, this machine offers robust functionality and reliable performance. Consider the opportunity to buy this Citizen C32 VIII swiss type turning machine. Contact us for more information. Hsdpfx Ahex D N Eusvofd Application Types Turning

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 2200 kg Measurements height 1700 mm Measurements depth 1200 mm Dimensions Hfedex D Dwfepfx Ahvsd Machine Length 2200 mm This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 2200 kg Measurements height 1700 mm Measurements depth 1200 mm Hfedex D Dwljpfx Ahved Dimensions Machine Length 2200 mm This Star SR 20 J Type C was manufactured in 2011. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 rpm, and a spindle power of 2.2 kW. The machine includes six fixed turning tool positions and five radial motorized tools. Ideal for precision Swiss-type turning, it has a compact footprint of 2.20 × 1.20 m. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm Hfedex D Dliepfx Ahved • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments