Used straightening and bending machines for sale (88)

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. Csdpfx Aiju Nfrpeisri *

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, pressing force: 110 t, Equipment: CE marking, documentation/manual, 110-ton electro-hydraulic press Made in Italy The P110 MR is equipped with: Immersed motor power unit, 400 V, 50-60 Hz. Rapid approach and return pump, calibrated to 20 bar. Cjdsfh R N Depfx Aiijri Adjustable pressure pump with handwheel for achieving the required power. Maximum pressure valve with mechanical lock to prevent overpressure. Manometer (standard) that allows for extremely precise calibration of the delivered power. The P110 MR is the only hydraulic press composed of 2 columns in a monolithic structure made of FE 510 steel, laser-cut without welding in the areas of greatest stress. This feature gives it exceptional robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Maximum pressure: 350 bar Maximum capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Inner width between columns: 1004 mm Rapid stroke advance: 1,400 mm/min Slow stroke advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Maximum absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Credpehyc Nwsfx Aiiji Total connection Approx. 35 kW

Condition: like new (used), functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 100 t, operating speed: 9 mm/s, reverse speed: 14 mm/s, table width: 2,545 mm, table length: 10,000 mm, table height: 900 mm, total length: 10,200 mm, total width: 3,660 mm, total height: 2,900 mm, overall weight: 26,000 kg, pressure: 320 bar, MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. Cjdpfx Aowkvmnsiijri • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m Cjdpfeu Nfv Uex Aiiori The machine is equipped for straightening work. *

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Crjdpjvgcpcsfx Aiisi Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Crodpfx Aist Hw Ameioi Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: used, Technical details: pressure: 63 t throat: 350 mm stroke: 400 mm dayligth: 650 mm total power requirement: 8 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 1,9 x 2,7 m Crodoyizw Uspfx Aiisi

Condition: new, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, OMCN 100-ton electro-hydraulic press, Model 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with rapid-action motor, pressure gauge, and double-speed hydraulic power unit achieved with a vane pump for rapid approach and return, and with an axial piston pump for the working phase. Equipped with a calibration valve and a three-position control distributor (forward, idle, return). The machine is complete with oil. Supplied with a winch for lifting the worktable. The ram is made of special steel, treated, and chrome-plated. The machine is equipped with two-hand control and synchronization as per current regulations. Crjdpofh R Nyofx Aiiji Complete with protective panels, rear and side. CE approval, including electromagnetic compatibility. Ram stroke: 310 mm Internal width: 1,010 mm

Condition: new, Year of construction: 2025, machine/vehicle number: SH-250, functionality: fully functional, pressing force: 250 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 8 mm/s, total length: 3,000 mm, total width: 2,000 mm, total height: 1,700 mm, Equipment: documentation/manual, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal hydraulic ram press is engineered with a range of three different capacities, from 100 to 250 tons. These horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams. The horizontal configuration enables easy handling of large-size beams and profiles. The latest-generation HS series offers versatile utility, with the possibility to fit a wide variety of tooling. They operate at a hydraulic pressure below 350 BAR to ensure greater durability of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature an electro-welded "C"-frame structure made exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. Design and calculation are carried out using finite element software, thus maintaining our high standards of robustness, accuracy, and quality. They come equipped with a main anti-rotation push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment includes C45E steel support blocks. Two adjustable side rollers are also included as standard, one on each side. Crjdswk Hkqopfx Aiioi CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder is operated by a lever hydraulic distributor. It is fitted with a removable block to prevent piston damage. Single speed motor-driven hydraulic power unit. ELECTRICAL INSTALLATION AND SAFETY Electrical system includes a motor protection switch and emergency stop. Supplied with a glycerine-filled pressure gauge (tonnage readout) and hydraulic oil. Fully complies with all essential CE safety and health regulations. Supplied with an operation manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm, height adjustable. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic elevation and tilting of feed rails. • 415 mm folding device. PROMECAM clamping system. • Additional single-speed manual pump, allowing both manual and powered operation. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Geometry customized to your requirements.

Condition: used, Year of construction: 1965, pressure 400 t throat 1140 mm stroke 600 mm table surface area 2000x1000 mm Plate 4000x1000x300 mm ram head dimension 2000x1040 mm Crsdpfxoyt R Dls Aiisi Cylinder 300 mm Daylight 650 dimensions of the machine ca. 3,9x4x4,2 m Machine has been overhauled. Maximum distance from ram to clamping plate: 1250 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), Year of construction: 2026, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm Crododk H A Ijpfx Aiiei - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm Crsdpfx Aieyghvfoiei ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: new, pressing force: 300 t, For sale is a hydraulic portal straightening press (H-frame) from manufacturer Durendus with a maximum pressing force of 300 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm, and a stroke of up to 600 mm, making it particularly suitable for straightening, alignment, and heavy forming applications in industrial environments. The machine shown here was built and delivered to a customer’s specification; we can manufacture this machine as a new unit on short notice. Available Options (upon request): The options listed below are based on completed customer projects and allow targeted adaptation of the machine to specific applications. The base machine is delivered in a functional basic configuration—in practice, it is most often expanded with additional features and configured to meet project requirements. Examples include: * Siemens S7-1200 PLC + 7” display for operator interface * Wireless remote control * Safety edge at the base of the portal columns (600 mm) * Table with T-slots * Motorized bridge positioning * Travel path extension * Larger open height * Light curtain under the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data & Information: Hydraulic Portal Straightening Press – H-frame – 300 t ==== General Specification - Designation: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Pressing force: 300 t (adjustable) - Distance between uprights: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max installation height: 1,000 mm - Table height from floor: 950 mm - Ram extension: 200–400 mm - Total weight: approx. 9,500 kg Cjdpfx Aisyzfkqsiori ==== Hydraulic Cylinder - Piston stroke: 0–600 mm - Max working pressure: 250 bar - Return speed: 16 mm/s - Ram speed: 10 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Pump capacity: 60 l/min - Tank volume: 250 l - Motor rating: 11 kW - Pressure accuracy: ±5 bar - Hydraulic unit: top-mounted - Valve technology: DUBLOMATIC - Filter: FILTREC - Oil level monitoring: electronic - Cooling: air cooling ==== Movement System - Bridge drive: 2 × 2.2 kW - Lateral cylinder movement: 0.75 kW - Movable bridge: yes - Laterally movable cylinder: yes ==== Control System - PLC: SIEMENS S7-1200 - Operation: pendant panel / wired remote control - Control: manual valve + electric control - Optional: 7" touchscreen - Optional: wireless remote control - Optional: up to 99 programs storable ==== Safety - Hydraulic overload protection - Electronic overload protection - End travel safety switches (top/bottom) - Safety PLC - CE-compliant design - Optional: safety edge on portal columns ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 11 kW - Total connected load: approx. 18 kW Fields of application: Straightening, tool and mold making, steel construction, heavy forming, maintenance, try-out, alignment work (Hydraulic press, hydraulic straightening press, portal press, portal straightening press, 300-ton press, 300 t press, H-frame press, heavy-duty press, industrial press, forming press, straightening system) ##### The images shown serve as samples and may deviate from the actual configuration.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height Csdpfx Askvmi Seiijri 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 4 Monate ab Auftragse Italien 75000 € 1417.5 € 150 to Credpfx Aisynmp Toiei 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 3 mm/s 2900 mm 2500 mm 2500 mm 5200 kg horizontal verschiebbar 2050 mm 1400 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t WORKING AREA LONG: 5200mm WIDTH: 2300mm Cjdpsfcnu Iofx Aiisri HEIGHT: 1000mm

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Crodpfxsyxnzyj Aiiji Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, pressing force: 200 t, DURENDUS DPS-200 – Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here was built and delivered on behalf of a customer. We can manufacture this machine for you at short notice. This is a hydraulic gantry straightening press from DURENDUS with a maximum pressing force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it ideally suited for straightening operations, press-fit processes, as well as applications in steel construction and tooling. Options (on request): The listed options are based on completed customer projects and allow for targeted customization of the machine to the specific application. The base machine offers a functional standard version – in practice, it is most often upgraded with additional equipment and configured according to project requirements. Examples: * Siemens S7-1200 PLC + 7'' display * Radio remote control * Safety strip at the base of the gantry columns (600 mm) * Table with T-slots * Motorized bridge travel * Extended travel range * Increased open height * Safety light curtain at floor level beneath the bridge * Laser distance measurement * Lifting cylinders integrated in the table ##### Technical Data & Information: Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Information Manufacturer: DURENDUS Model: DPS-200 Design: Gantry Press / H-frame Press Pressing Force: 200 t (adjustable) Total Weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between Uprights: 1,580 mm Table Height: 900 mm ==== Working Area Table Size: 1,500 × 2,000 mm Max. Installation Height: 800 mm Ram Stroke: 400 mm Ram Extension: 300 mm Cjdpfx Asyzfuisiisri ==== Movement System Lateral Cylinder Adjustment: ±750 mm Bridge Travel: 1,500 mm Operation: manual adjustment (cylinder and bridge) ==== Hydraulic Cylinder Max. Operating Pressure: 320 bar Working Speed: 9 mm/s Return Speed: 17 mm/s ==== Hydraulics & Drive Motor Power: 15 kW Pump Capacity: 32 l/min Tank Volume: 140 l Hydraulic Components: DUPLOMATIC Filter: FILTREC Cooling: Air cooler ==== Control System Operation: manual via hand lever valve Integrated safety PLC Components: SIEMENS Optional: PLC S7-1200 with 7" touch panel, recipe management, pressure and position control ==== Safety Hydraulic overload protection Electronic overload protection Upper/lower limit switches CE-compliant design ==== Electrical Connection Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Total Connected Load: approx. 18 kW Control Cabinet: IP54 ##### Fields of Application: straightening, press-fitting, forming, tool adjustment, steel construction, metal construction, mold making, automotive Hydraulic press, gantry press, straightening press, H-frame press, 200 T press, tryout press, tool tryout press, adjustable press, heavy-duty press The images shown are for sample purposes and may differ from the actual design.

Condition: good (used), TABLE PRESS WITH POWER UNIT Crsdek Adfnepfx Aiiei

Condition: new, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save -24% compared to the RRP! TIGERMETAL WH150 – Hydraulic Workshop Press 150 Tons | Electric + Manual Pump The TIGERMETAL WH150 workshop press is a powerful industrial press designed for the most demanding applications in workshops, production, and maintenance. With a pressing force of 150 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations in professional environments. Thanks to the combination of electric drive and manual hand pump, the press allows both fast operation and highly sensitive, precise pressure control – especially for delicate workpieces. Credpfsf Sqckox Aiiji 🔧 Technical Data: Model: WH150 Manufacturer: TIGERMETAL Pressing force: 150 tons Drive: Electric motor + manual pump Motor power: approx. 4 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 310 bar Stroke: approx. 400 mm Working width: approx. 1200 mm Max. working height: approx. 1000 mm Weight: approx. 1080 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The WH150 is the ideal solution for anyone looking to combine maximum pressing power with the highest level of precision, flexibility, and industrial reliability. The laterally movable cylinder and height-adjustable working table ensure maximum flexibility and optimal adaptation to a wide variety of workpieces. The massive steel construction guarantees maximum stability, safety, and a long service life – even under intensive industrial use. Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. A wide range of additional workshop presses in various designs, sizes, and with optional equipment is available! Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. A demonstration machine can be tested on-site under power. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm Cjdpfx Aisvgu Haoieri -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: new, pressure 400 t distance between columns 600 mm stroke 600 mm table-size 3000 x 1500 mm Crodpszyvakefx Aiisi travel x / y 2200 x 900 mm working feed 7 mm/sec tank capacity 66 l working pressure 30-250 bar total power requirement 18,5 kW weight of the machine ca. 25 t dimensions of the machine ca. 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 160000 € 3024 € 300 to Cjdpoynmu Nsfx Aiieri 500 mm 4.000 x 2.550 mm 700 mm 20 mm/s 2 mm/s 3550 mm 4000 mm 2600 mm 15000 kg horizontal verschiebbar 2550 mm 1.800 mm 2.800 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Year of construction: 2023, condition: new, DPM 1070 x 150ton Hydraulic Garage Press Cap: 100ton Many other sizes and capacities available. • Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ) • Adjustable table height Csdpsgyta Hefx Aiisri • Table up-down movement attachment • Control with special joystick • Right- Left moving piston by hand (DK) • Built According to EC Safety Directives and has CE • User’s manual