Condition: good (used), Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos Dksb Ey S Iowah Iconol -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Condition: excellent (used), Year of construction: 2012, KASTO circular saw, type: radial M6, year of manufacture 2012 In very good condition, like new. Barely used. Cutting range: Circular max: 90 mm Cutting speed: 26/53 m/min Saw blade: 315 x 2.5 x 32 mm Coolant system. Weight approx. 210 kg. Machine documentation available. Dkob Ejwah E Uoy S Inel For further information, see data sheets.

Condition: good (used), Year of construction: 1975, Functionality: fully functional, Fully automatic band saw Forte SBA 240/II Article number: 19-03-029 Manufacturer: Forte Dkeb Ey Sjwah Hxe Inel Good general condition Delivery time: immediately available Machine workshop tested Year of construction: ca.1975 L x W x H: approx. 1900x1600x1650mm Weight: approx. 1000kg Saw blade dimensions: approx. 3660x27x0.9mm Cutting range: Round: approx. Ø 250mm Square: approx. 250x250mm Flat: approx. 270x250mm Automatic material feed: approx. 3 - 400mm Cutting speed: approx. 10 - 70 m/min Drive power: approx. 3.5 kW Accessories: Coolant Setup Documentation Piece count counter Roller trestle Other accessories on request Price and other technical data on request

Condition: good (used), Automatic Circular Saw KALTENBACH Ø 370 mm Blades diameter: Ø 370 mm Maxi cutting height in round: 115 mm Maxi cutting height in flat: 120 mm 2 speed rotation motor Graduated circular tray Ø 590 mm Swivel +/- 45° Hydraulic clamping of the workpiece Graduated stop length: 2000 mm Machine used only for stainless steel cutting Voltage: 380 V Deb Ey S Iourtt Ssnskl Length with fixed feed: 3000 mm Depth: 1400 mm Height: 2000 mm Weight: approx 900 kg

Condition: used, Functionality: fully functional, Well-preserved band saw from PEHAKA. See pictures for details. Dksb Ey S Iowcg H Nonsl

Condition: refurbished (used), Year of construction: 1998, A Kaltenbach cold circular saw is for sale. The machine has been completely disassembled and rebuilt. During the overhaul, the gearbox, motor, and hydraulics were overhauled. The table was refaced and re-bearings were installed. Gearbox is backlash-free! Type: KKS 400 E Year of manufacture: 1998 Saw blade diameter: 400 mm Dkjbswcgdhs Ey S Insl Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse speed: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / Pick-up in 89558 Boehmenkirch Shipping available upon request Forklift available for loading.

Condition: as good as new (ex-display), workpiece length 3000 mm roll diameter 50 mm Wheel width 215 mm Roll lenght 210 mm work piece width 300 mm Height 800 bis 1100 mm No. - Rolls 12 dimensions of the machine ca. 3 x 0,31 x 0,55 m Unused feeding roller conveyor with two feet and metal rolls price 490,--/piece, 2 pieces available. Machine dealer with own stock of 1600 m². Dob Eyewabfuo S Inokl

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Schnittbereich quadratisch (B x H): 20 x 70 mm Dksb Ey S Ijwaa Dvenel Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 65 mm Kürzeste Reststücklänge im Einzelschnitt: 30 mm Length: 2300 mm Breite inkl. Späneförderer : 2260 mm Height: 22100 mm Höhe der Materialauflage: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30-160 rpm Vorschubgeschwindigkeit der Säge: 0,3-30 mm / sec Automatische Materialvorschublänge, Einzelhub: 800 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Sägeblattdurchmesser: 360 mm Sägeblattbohrung: 40 mm Sägeblattdicke: 2,25 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, saw band length: 3,370 mm, saw band width: 27 mm, warranty duration: 12 months, net weight: 890 kg, CUBO 350 NC FLAT is a numerically controlled automatic hydraulic cutting machine for cutting medium-sized pipes, profiles, T-bars and bars. The machine allows for angle cutting. The integrated feed vice with encoder ensures precise cutting lengths. Thanks to the Industry 4.0 Ready system, the CUBO 350 NC FLAT can be controlled and programmed remotely or via touch screen. The CUBO 350 NC BOX model is a front band saw that ensures user safety by securing all 4 sides with a special sheet metal covering all moving parts of the band saw. The safety system ensures full accessibility for maintenance. An innovative and easy-to-use 7-inch touch screen with an intuitive interface allows control over all machine settings. 99 cutting programs and 10 different cutting lengths can be programmed on the same bar. The CNC control gives access to all the machine's operating functions: automatic calculation of the blade thickness, the number of stroke repetitions and pieces to be cut, the blade speed and the lowering feed, the cutting length for each bar. The interface also allows viewing the status of the CUBO during operation and anomalies with self-diagnosis. Integrated feeder allowing automatic repetition of the cutting process. The feeder slides on a hardened and chromed bar; high positioning precision thanks to the incremental power supply of the ball screw with circulation by means of a self-locking electric motor with inverter, mounted on a floating plate to facilitate the loading of non-straight bars. The saw frame has a rigid cast iron structure manufactured by IMET with a tubular section, which ensures high resistance to deformation and better projections in each section and material. The arc is equipped with a cemented and hardened endless screw and a crown made of high-quality resistance bronze alloy. The mechanical material detection device ensures the blade approaches the material quickly, automatically detecting the first cutting point, while the end of the cut is managed by a microswitch on the moving blade guide, which allows for perfect blade positioning thanks to the hard metal pads and additional bearings. IMET machines can be connected to the company network and used remotely thanks to SAWFACTORY and a modem. SAWFACTORY is a dedicated software that allows you to manage the cutting process from your desk by setting cutting programs and monitoring the workflow thanks to a dedicated web application. The software also allows you to use the help of our technicians remotely. Technical data: Belt width: 27 mm Vise opening width: 350 mm Belt dimensions: 3370x27x0.9 mm Belt speed: 15-100 m/min Dkobewcfbxe Ey S Insl Belt motor power: 1.8 kW Working height: 880 mm Final waste: 80 mm Single feed length: 515 mm Coolant tank capacity: 100 l Hydraulic tank capacity: 20 l Dimensions: 1850x1900x1990 mm Weight: 890 kg

Condition: good (used), Band Saw MEBA Blades dimensions: L 4270 mm x H 41 mm x Thickness 1,5 mm Maxi square cutting capacity: Ø 440 mm Flat cutting capacity: 700 x 300 mm Jaws width: 380 mm Jaws height: 300 mm Removable jaws at +/- 45° Auto blade descent with hydraulic advance Blade speed adjustment: mechanical variator Dkjb Eysvzrh Rs S Inel Delivered with 2 feed tables Lubricant pump Voltage: 380 V Length: 2700 mm Width: 1300 mm Height in closed position: 1500 mm Weight: approx 1,2 T

Condition: new, Year of construction: 2025, Three-phase 400V motor with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard features Precision drive controlled by a frequency converter Digital speed display Infinitely variable belt speed Balanced belt pulleys Dkeb Esir Ey Ijy S Injl Hard rubber-coated running surfaces Hardened and ground guide jaws LED workstation light Height-adjustable guide arm Machine color RAL 7005 / RAL 7035 12-month warranty for single-shift operation OPTION Item No. 410.020 Machine price €15,450 Incl. minimum quantity slicing and longitudinal stop DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: C109289, cutting length (max.): 4,000 mm, saw blade diameter: 500 mm, Double saw for cutting aluminum, 500 mm blade, radial cut for increased cutting capacity. Automatically set angles of 90, 45, 30 degrees. Roller feeder supporting the profile on the movable head, USB socket, list import, intermediate support. Djb Eswcb D Nsy S Inekl

Year of construction: 2019, Condition: ready for operation (used), General Data Measurements width 1100 Measurements depth 2000 Measurements height 1700 Machine weight 950 Dkob Esv U Evboy S Injl This Klaeger Bitron 300 3D Cut was manufactured in 2019, offering advanced capabilities for precise band metal sawing. Ideal for complex cutting tasks, this machine represents a significant asset for enhancing production efficiency. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 420 x 420 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 420 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 130 - 260 x 160 mm Dsb Ey S Iewaa A Senekl Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 190 mm Kürzeste Reststücklänge im Einzelschnitt: 10 mm Length: 2220 mm Breite inkl. Späneförderer : 3030 mm Height: 2250 mm Weight of machine approx.: 3000 kg Electrical connected load: 11,5 kW Leistung des Sägemotors: 7,5 kW Leistung hydraulischer Motor: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 5150 x 41 x 1,3 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 350 mm, rotational speed (max.): 3,600 rpm, Automatic IMET VELOX 350 AF-NC disc cutter for aluminum with a swiveling arm from 0° to 45 degrees left and right and a tilting head up to 45 degrees. Fast and precise angle lock at 0°, 15°, 30° and 45° right and left with an additional scale for setting non-standard angles. Description: Swiveling arm from 0 to 45 degrees left and right Dkob Ey Sewcd Ukj Inel Tilting head up to 45 degrees Fast and precise angle lock at 0, 15, 30 and 45 degrees right and left and an angle scale for setting non-standard angles. Handle for locking the head at any angle Designed for cutting aluminum and light metal solid materials and profiles with high accuracy Control panel with the ability to program all machine operations (including the cutting start point and the cutting end point), showing the blade speed, cut counter, cycle time, motor current and possible errors Feeder with a vice with a max. jaw opening of 200 mm, with a max. stroke of 530 mm, with a min. 2.5 mm stroke Number of cuts (1-9999) and number of feeds (1-29) set from the control panel Manual setting of cutting length with digital readout Two front pneumatic vices with the possibility of transverse movement on the work table, vertical pneumatic vice Metal cutting blade guard Possibility of connecting a chip extractor Mist lubrication system operating only during cutting Instruction manual in Polish CE certificate, compliance with CEE and EMC standards Electrical elements compliant with the standards: EN60204-1, EN55011 and EN50082 Technical data: Diameter of the blade: 350 mm Opening width of the vices: 200 mm Speed of the blade: 3600 rpm Power of the blade motor: 2.2 kW Working height: 930 mm Final waste: 355 mm Single feed length: 520 mm Coolant tank capacity: 40 l Dimensions: 1800x1450x1950 mm Weight: 607 kg

Condition: good (used), Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Dob Ejvzrg Hsy S Inskl Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Condition: new, Year of construction: 2025, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vice Shutdown after cutting, return of the saw arm to its starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vice Precision-ground carbide saw blade guides, adjustable Electric coolant pump Manual blade tension with display, including electric saw blade and cutting pressure monitoring Hydraulic vice (opening and closing) Revolving chip removal brush Large, solid round support table, rotating for miter cuts with a predefined cutting channel, manual miter adjustment, readout via scale 500 mm material stop with scale Including combi-toothed saw blade 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: 400 V three-phase, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20-120 m/min. Vice clamping width: 320 mm Working height: 760 mm Sawing range: at 0° = round diameter 250 mm, square 240 x 240 mm, rectangle 320 x 190 mm Dkebjcl Tc Ao Ey S Insl Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight: 420 kg Please inquire about additional accessories. DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 238067, saw blade diameter: 450 mm, type of input current: three-phase, Saw for cutting aluminum profiles at a 90 degree angle, fully automatic cutting. Dsbjwcbh Uj Ey S Inokl

Condition: new, Year of construction: 2025, Schnittbereich rund: 320 mm Schnittbereich quadratisch (B x H): 320 x 320 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 320 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 100 - 260 x 130 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 130 mm Kürzeste Reststücklänge im Einzelschnitt: 10 mm Length: 2320 mm Breite inkl. Späneförderer : 2600 mm Height: 1750 mm Höhe der Materialauflage: 750 mm Weight of machine approx.: 1800 kg Electrical connected load: 6,2 kW Leistung des Sägemotors: 5 kW Leistung hydraulischer Motor: 0,75 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Dkjb Ey S Iswaa A Esnjl Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 4115 x 34 x 1,1 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 350 mm, overall weight: 266 kg, IMET VELOX 350 semi-automatic circular saw for aluminum with a swiveling arm from 0° to 45 degrees left and right and a tilting head up to 45 degrees. Fast and precise angle locking at 0°, 15°, 30° and 45° right and left with an additional scale for setting non-standard angles. VELOX 350 SHE is a semi-automatic circular saw for cutting aluminum and light alloys. VELOX 350 SHE can cut from 45° left to 45° right and cuts at an angle of up to 45° to the vertical axis. The miter saw is the ideal tool for high-precision cutting and finishing of profiles and solid aluminum. The machine is equipped with an automatic stop system at 0°, 15°, 15°, 30° and 45° both to the right and left. All machine operating functions are controlled via the control panel. In particular, it allows you to set the head position in terms of reaching the material and starting and ending the cutting operation, allows you to view the machine's operating conditions before and during processing. It also has a self-diagnosis system for detecting errors. Two pneumatic vices located at the front and moving laterally on the work surface allow you to block the material. The blade of the disc is fully protected by a guide. There is also a conveyor for chip extraction and an adjustable rod stop. The VELOX 350 SHE has a nozzle for spray lubrication. Features of the device: The cutting cycle takes place in automatic mode Cutting range from 0 to 45 degrees to the right and left Head tiltable in two planes up to 45 degrees Quick angle lock 0, 15, 30 and 45 degrees to the right and left. Additionally, a built-in scale for setting the remaining angles Control panel with the possibility of programming all machine operations Display of blade speed, cutting counter, cycle time, engine current and possible error codes Two pneumatic vices with the possibility of transverse movement on the work table Built-in encoder enabling precise setting of the starting and ending points of the cutting cycle. Protected by a main switch and a minimum voltage coil, thermal motor overload protection Purpose: aluminum, light metals Optional equipment (additionally payable): pneumatic vertical vice for blocking the material two pairs of cast iron V jaws for bundles of shapes and round bars (max. diameter 90 mm.) with tools for their assembly foot pedal with a 3m cable HSS steel blade with hard metal teeth, diameter 350x3.2x32mm with a 32mm hole chip extraction with a magnetothermal switch and a flexible tube with a power of 0.75KW Technical data: Disc diameter: 350 mm Vise opening width: 200 mm Disc speed: 1800/3600 rpm Disc motor power: 1.5/1.8 kW Dksbswcd N Ij Ey S Injl Working height: 865 mm Dimensions: 1100x920x1700 mm Weight: 266 kg

Year of construction: 2011, Condition: used, Vertical Semi-Automatic Chainsaw EISMO-IMET type WS 370 SA Year of construction: 2011 Blades dimension: Ø 370 mm Cutting capacity: Straight cut Ø 120 /180 x 100/100 x 100 mm Bevel cut: 45° right - 45° left - 60° right Pneumatic vise Deb Ey S Isv Dkyqjnokl Adjustable forward/downward Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1200 mm Total height: 2000 mm Weight: approx 500 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, saw band length: 2,765 mm, saw band width: 27 mm, cutting speed: 70 mm/min, net weight: 289 kg, The IMET BS 300/60 manual band saw is a manual band saw designed for cutting medium-hard materials and for small and medium-sized productions. The machine can cut from 0° to 60° to the left. Deb Eowcd H Hey S Inokl Adjustable stops The BS 300/60 is equipped with an adjustable stop system at 0°, 45° and 60° with a graduated scale for other angles. Blade protection The BS 300/60 blade is protected by a hinged blade guard that allows quick and easy blade replacement. Saw frame cutting IMET saws are equipped with a rigid, monobloc, cast iron cutting arc with a tubular cross-section and pulleys from 320mm, and the blade tension is 1700kg/cm2 with front adjustment and a control microswitch. Front vice Front clamp with quick lock and 130 mm high jaws and adjustable stop bar for serial cutting. Blade alignment Blade guide with carbide inserts and front bearings for optimal blade positioning. Use Safe start using the button on the handle, LED function control. Optional equipment (additional charge): Minimum lubrication may be required for each machine. Minimum lubrication eliminates coolant dispersion typical of using emulsifying oil. This has no effect on the service life of the blade. Adapter for synchronizing the movement of RTD, RTP and saw frame. Pneumatic vice with opening and closing controlled by a bail. Technical data: Tape width: 27 mm Vise opening width: 300 mm Tape dimensions: 2765x27x0.9 mm Tape speed: 35/70 m/min Tape motor power: 1.5/1.8 kW Working height: 940 mm Dimensions: 900x1700x1860 mm Weight: 289 kg

Condition: good (used), Semi automatic Band Saw EISELE THOMAS HTB 350 AO CN Cutting capacity in the round: Ø 260 mm Square cutting capacity: 240 x 240 mm Maxi jaws opening: 310 mm Jaws height: 140 mm Angular cutting Auto clamping of the second vise Dob Ey Sjvzrd Es Inskl Auto descent by hydraulic variator Automatic non-functional (machine only work in semi automatic) Voltage: 380 V Length: 2200 mm Depth: 2200 mm Total height in height position: 2000 mm Weight: approx 800 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, saw band length: 2,965 mm, saw band width: 27 mm, total height: 940 mm, cutting speed: 70 mm/min, net weight: 290 kg, Manual IMET GBS 242 GH Auto Cut band saw enabling angle cutting – arm swivelling to the right and left – and hydraulic feed. The machine is equipped with a manual vice with quick clamp, manual arm lifting, cooling system, two cutting speeds and smoothly adjustable feed. The cutting tool – bimetallic band 27 mm high is precisely guided in cubes made of sintered carbides. Basic data: Manual scissor type machine Maximum cutting diameter: ø 250 mm Working feed: gravity arm drop; smooth adjustment Arm lifting: manual Cutting at an angle: right 0° - 45° - 60°; left - 45° Band size: 2965 x 27 x 0.9mm Band speed: 2 cutting speeds 35/70 m/min Vise: manual - quick clamp GBS 242 GH has a large worktop with a rotating integrated with a handle designed to avoid cuts on the same ball bearing for easy rotation. Vise with adjustable guides, sliding laterally on the work surface and quick approach to the material being cut. The blade guides of the GBS 242 GH model are equipped with carbide inserts and additional front bearings for optimal blade positioning. The bimetal blade measures 2965 x 27 x 0.9 mm and works at a speed of 35 to 70 meters per minute, making it the ideal tool for processing steel and cast iron. The controlled lowering system is equipped with automatic operation with a 3-position selector for: Manual cutting Quick approach to the material Dsb Eswcd Eioy S Injkl Automatic cutting with autonomous lowering, adjustable stop and end cut microswitch Standard equipment: cooling system bimetallic tape - 1 pc. in the machine instruction manual in Polish CE certificate Additional equipment for an additional fee: roller feeders measure with bumper connector oil mist lubrication system (micronizer) tensometer for precise adjustment of the tape tension Technical data: Tape width: 27 mm Vise opening width: 290 mm Tape dimensions: 2965×27×0.9 mm Tape speed: 35/70 m/min Tape motor power: 1.1/1.3 kW Height working: 940 mm Dimensions: 1500x1250x1700 mm Weight: 290 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, saw band length: 2,720 mm, saw band width: 27 mm, cutting speed: 70 mm/min, working height: 900 mm, warranty duration: 12 months, net weight: 260 kg, Manual IMET GBS 240 GH Auto Cut band saw enabling angle cutting – arm swivelling up to 60° to the right – and hydraulic feed. The machine is equipped with a manual vice with quick clamp, manual arm lift, cooling system, two cutting speeds and smoothly adjustable feed. Cutting tool – bimetallic band 27 mm high is precisely guided in cubes made of sintered carbides. Basic data: maximum cutting diameter: ø 240 mm working feed: gravity arm drop; smooth adjustment arm lift: manual angle cutting: Right 0° - 45° - 60° cutting band dimensions: 2720 x 27 x 0.9mm band speed: 2 cutting speeds 35/70 m/min. vice: manual - quick clamp Dkobewcd Dls Ey S Injl GBS 240 GH has a large worktop with a rotating integrated with a bow designed to avoid cuts on the same ball bearing for easy rotation. Vice with adjustable guides, sliding laterally on the work surface and quick approach to the material to be cut. The bimetal blade measures 2730x27x0.9mm with a working speed of 30 to 70 m/min making it the ideal tool for machining steel and cast iron. The controlled lowering system is equipped with automatic operation with a 3-position selector for: Manual cutting Quick approach to the material Automatic cutting with autonomous lowering, adjustable stop and end cut microswitch. Standard equipment: cooling system bimetallic tape – 1 pc. in the machine user manual in Polish Additional equipment at extra charge: roller feeders oil mist lubrication system (micronizer) tensometer for precise adjustment of tape tension Technical data: Tape width: 27 mm Vise opening width: 270 mm Tape dimensions: 2720×27×0.9 mm Tape speed: 35/70 m/min Tape motor power: 1.2 kW Working height: 900 mm Dimensions: 680x1400x1800 mm Weight: 260 kg