Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) Iodpfx Ahsytpxnsvehw 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Ihjdpfsyqydcjx Ahvsw Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm MACHINE DETAILS Circular saw blade units: 1 Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking Iodjyqyc Eepfx Ahvshw The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm Iodsyuya Espfx Ahvjhw MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106015, saw blade diameter: 520 mm, overall weight: 500 kg, tilt adjustment saw blade: 45 °, cutting depth: 600 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 520 mm Maximum cutting depth: 600 mm Saw blade tilt max.: 45° (electrically adjustable) MACHINE DETAILS Isdpjyuxuzofx Ahvjhw Dimensions & weight Dimensions (L x W x H): 6,200 x 3,200 x 2,300 mm Machine weight: 500 kg

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. Iedpfsyttqzsx Ahvshw External Reference: 5552

Condition: good (used), Year of construction: 1986, used, good condition Manufacturer: Altendorf Model: F45 Year of manufacture: 1986 Machine no.: 86-4-143 GS-certified Motor 5.5 kW Carriage length approx. 2500 mm Cutting width approx. 800 mm Tiltable up to 45° Saw blade diameter: 450 mm Ihsdpoyvv I Njfx Ahvew Parallelogram guard Mitre fence Extraction connection D 80 and 120 mm Space requirement approx. 2500 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Location: ex stock 54634 Bitburg, free loaded, unpacked Handed over in the current as-inspected condition, without warranty or guarantee

Condition: used, Length of the rolling table max. 3.200 mm Saw blade diameter max. 400 mm Ihjdpfx Ahoyc Rtrjvow 45°

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This SCHÜCO PGS features a maximum saw blade diameter of 400 mm and a motor speed of 2800 min⁻¹. It includes essential equipment such as a wireless measuring rod, roller conveyor tracks, a digital control screen, and an integrated extraction unit. If you are looking to get high-quality glazing bead cutting capabilities, consider the SCHÜCO PGS machine we have for sale. Contact us for further details. • Motor type: E63S-B3 • Motor speed: 2800 min⁻¹ • Max. saw blade diameter: 400 mm • Electrical connection: 400 VAC / 50 Hz, 1,5 kW • X-axis travel: 2850 mm Additional equipment • Wireless measuring rod (Funkmessstab) • Roller conveyor tracks Isdeyvu Ibepfx Ahvohw • Digital control screen • Integrated extraction/collection unit

Condition: used, Year of construction: 2009, power: 3 kW (4.08 HP), cutting height (max.): 2,150 mm, cutting width (max.): 4,300 mm, No. 3261 Vertical panel saw ELCON ADVANCE 215 DSX Used, year of construction 2009, machine still in operation, expected to be available from 01.05.2026 Precision panel saw ELCON ADVANCE 215 DSX - The panel saw for industrial production Vertical cutting height 0 - 2150 mm Horizontal cutting height 50 - 2050 mm Cutting length 4300 mm Cutting depth 80 mm (55 mm with clamps) Saw blade protrusion behind the panel 15 mm Saw blade 303 x 30 mm, Z-60 hollow roof tooth Saw blade speed 4200 rpm Motor 3 kW Air pressure requirement 6 bar Material support rollers 20 rollers, ball-bearing mounted + 2 feed and discharge rollers Panel clamping for horizontal saw cuts via pneumatic workpiece clamping device with switch on the control panel Center support 3 support elements for 3 m support, pneumatically extendable Dimension readout for horizontal saw cuts via electronic digital display with zeroing (for strip cutting from top to bottom) / via scale from 0 - 2100 mm / via strip cutting stop from 75 - 730 mm Dimension readout for vertical saw cuts via electronic digital display / via scale from 0 - 1300 mm Extraction nozzles 100 mm for the saw unit and 120 mm for the extraction channel on the right side of the machine frame Equipment features ADVANCE consisting of 2 pneumatic clamping jaws that move motor-driven along the vertical axis on a ball screw from top to bottom (the jaws can support panels weighing up to 150 kg) Ijdpfx Ahjyvu Afevohw Electro-pneumatic scoring system for tear-free cuts via a double cut with the main saw blade Torsion-free, freestanding machine frame Round bar guide for vertical and horizontal travel Pneumatically retracting slatted guide prevents the saw blade from cutting into a rear wall slat (strip) Extraction nozzle for the saw head to collect dust in front of the workpiece Extraction nozzle for 3 vertical extraction channels to collect dust behind the workpiece Fine-adjustable folding fence for vertical cuts, guided on a 30 mm round bar Fence extension Fine adjustment for horizontal cuts via handwheel Fold-out strip cutting stop with ball bearing sensor on the upper panel edge, adjustable from 75 - 730 mm, for repetitive saw cuts Manual programming rail for setting 5 different horizontal fixed dimensions Pneumatic lowering of the saw unit via a lowering lever Pneumatic saw head locking from the control panel for horizontal cuts Guide holder Minimum strip height with Advance clamping jaws 400 mm Sale on behalf of customer, from location near 72280 Dornstetten, without dismantling, without transport, and without assembly Dismantling, loading, and transport by us optionally possible Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex location

Condition: used, Year of construction: 2016, total length: 7,200 mm, total width: 1,400 mm, total height: 3,000 mm, Weight: 640 kg Vertical wall saw Year of construction: 2016 Weight: 640 kg Engine: 4kW 400V Machine number: 5921 AU Cutting height: 2150mm Cutting length: 6200mm Cutting depth: 55mm Saw blade diameter: 250mm Scoring saw blade diameter: 70mm Air pressure: 6 bar Motor speed: 2800 rpm Cutting speed: 5000 U/min Scoring saw blade speed: 13000 U/min - Year: 2016 - Documentation available: No - CE certificate present: No - Serial number: 5921 AU - Max. cutting height vertical [mm]: 2200 - Max. cutting height horizontal [mm]: 2150 - Max. cutting width [mm]: 6200 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 Isdewng Svepfx Ahvshw - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 100 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Power [kW]: 4.0 - Transport dimensions: 7200mm x 1400mm x 3000mm (l x w x h) - Transport weight [kg]: 640kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Radial saw with high capacity Cutting height +/- 200mm with blade of diameter 500mm Cutting length ± 700mm Table of 200cm/105cm Tilting head from 0 to 45° Raising and lowering the blade at the front of the machine 400v 5.5 kW motor Ijdpjyvtycjfx Ahvjhw 380V

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Ihjdpexnlgcefx Ahvsw

Condition: used, Year of construction: 1997, total length: 7,230 mm, total width: 1,450 mm, total height: 1,650 mm, Weight: 1.935 kg Price: On request Ihjdpfxsxwk Dxs Ahvsw - Year: 1997 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 970114 - Main motor power [kW]: 4.5 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Max. spindle speed [rpm]: 2800 - Transport dimensions: 7230mm x 1450mm x 1650mm (l x w x h) - Transport weight [kg]: 1935kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2025, operating hours: 57 h, Weight: 11.600 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24111638 - Operating hours: 57 - Main motor power [kW]: 30.0 - Max. cutting height [mm]: 940 - Table length [mm]: 6000 - Table width [mm]: 1050 - Fuse [A]: 100 - Power [kW]: 51.0 Iedpfex Npwwex Ahvehw - Transport weight [kg]: 11600kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, - Year: 1978 - Documentation available: No - CE certificate present: No Isdpjyazbbefx Ahvshw - Serial number: 78-11-11 - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Options: Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 Isdpfx Aexdlxkohvshw - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Weight: 508 kg - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: KK/080974 - Roller table length [mm]: 3570 - Table width [mm]: 1800 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8000 - └ Pre-cutter saw blade diameter [mm]: 80 - └ Arbor pre-cutter saw blade diameter [mm]: 20 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Transport weight [kg]: 508kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iedpfxoyvr Daj Ahvshw Yorick Diebels

Condition: used, Year of construction: 2004, - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 409081 - Max. cutting height vertical [mm]: 3000 - Max. cutting width [mm]: 8000 - Max. saw blade diameter [mm]: 300 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8 Ijdpfxoyvr Avj Ahvehw - Fuse [A]: 16 - Power [kW]: 3.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, total length: 2,200 mm, total width: 2,150 mm, total height: 2,080 mm, Weight: 3.500 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 04A62 - Main motor power [kW]: 30.0 - Max. saw blade diameter [mm]: 450 - Max. distance between saw blades [mm]: 550 - Max. cutting width [mm]: 690 - Max. cutting height [mm]: 150 - Min. workpiece length [mm]: 2000 - Feed speed: - └ Min. feed speed [m/min]: 20 - └ Max. feed speed [m/min]: 120 - Spindle speed: - └ Max. spindle speed [rpm]: 3600 - Transport dimensions: 2200mm x 2150mm x 2080mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ihjdpfxjwnhy Ue Ahvjw VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm Ihsdpfxjyvqz Do Ahvsw • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm Ihsdpfxedibw Ao Ahvow max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Ihjdextbtpopfx Ahvow Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 Ihsdpecrnm Nefx Ahvsw DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, Technische Daten: fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm Iedpfjby U Dpox Ahvshw fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE