Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,150 kg, This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. • Drive system: Gear-and-worm gearbox, oil-lubricated, with 3-phase pole-changing main motor 4.0/4.8 HP • Blade speed: 46/92 SFM • Control panel: User-friendly interface; handwheel for material stop; vertical and horizontal clamping pressure control Hfsdpox D Iqpofx Ahvsd • Hydraulic system: Fully hydraulic, infinitely variable blade feed; 2.4 HP motor with 6.6-gallon pump • Clamping: Vertical and horizontal clamping device • Material handling: Adjustable material stop • Coolant: Integrated coolant system

Condition: ready for operation (used), Year of construction: 2001, Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details. • Cutting length: 5800 mm • Cutting width: 2 x 2200 mm • Max. cutting height: 100 mmAdditional equipment • Rear roller table: 3982 mm • Rear support beams: 9 pcs., 40 x 4056 mm • Front air-cushion tables: 2 pcs., 600 x 1800 mm, movable • Front air-cushion table for angle cutting device: 1 pc., 600 x 1400 mm • Left air-cushion angle table: 600 x 1800 mm • Angle ruler: up to 2060 mm • Liftable clamping collets: 9 pcs. Hjdpfx Ahoyn Nccjvefd • Liftable stop jaws: 2 pcs. • Side pressure: 65–1365 mm, infinitely variable • Automatic angle cutting device • Hydraulic lifting table with roller conveyor • Feed roller conveyor • 4 longitudinal aligners • 4 plate pullers

Condition: ready for operation (used), Year of construction: 1994, cutting length (max.): 5,800 mm, Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details. • Cutting width: 5150 mm Hodpsyn Nmzofx Ahvjfd • Rear support table (split): 1 pc, 370 x 4910 mm • Rear support beams with rollers: 9 pcs, 40 x 4910 mm • Front sliding support table with 3 front guide rollers: 3 pcs, 600 x 1800 mm • Mitre table: movable • Air-cushion mitre table: movable • Angle table: left • Left air-cushion table: up to 2020 mm • Floating collets: 7 pcs • Cutting jaws: 4 pcs Additional equipment • Color screen • Graphics • Online I

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz) Hsdpfx Ahjyabkvevofd

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine Hfodpfx Aeyhqlrjhved • Slow scoring / pre-cut function

Condition: ready for operation (used), Year of construction: 2004, total width: 1,450 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 2,700 mm, Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details. • Total installation length (foundation plan): 3226 mm • Saw blade diameter: 450 mm • Saw blade type: HM / HSS (DIN 8576) • Blade bore: 50 mm • Number of fixing screws: 4 • Bolt circle: 80 mm • Fixing screw diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed speed: 0–3500 mm/min Hfedpfxeykqrwo Ahvod • Rapid return: 4500 mm/min • Cutting speed (at 400 mm blade): 1950 / 3900 m/min • Feed speed (material feed): 10 m/min (optional: 10 / 20 m/min) • Adjustable cut lengths: 10–1000 / 2000 mm • Miter adjustment: Stepless ±90° (manual) • Drive power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6–8 bar • Control system: Kaltenbach PLC • Lubrication: Micro spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Condition: ready for operation (used), Year of construction: 2008, overall weight: 2,300 kg, cutting speed: 3,400,000 mm/min, This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details. • Cutting capacity round: 115 mm • Cutting capacity rectangular: 200 × 70 mm • Cutting capacity square: 105 × 105 mm • Saw blade diameter: 350 mm • Saw drive power: 6.5 / 8.0 kW • Control system: BEHRINGER PLC control • Lubrication: Micro spray system • Controlled zero stop (gesteuerte Nullkante) • Cutting gap extension (Schnittspalterweiterung) • Machine light • Vertical main clamping Hodpoykravjfx Ahvsfd • Backstop lock (Rücklaufsperre) • Extraction system prepared Additional equipment • Infeed roller conveyor: approx. 5000 mm (custom built)

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm Hfedpfjylmmmsx Ahvod • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Hfjdpfxjx Rpdys Ahvjd Machine Depth 4800 mm

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces Hedpfsyaiiyjx Ahvsfd • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. Hsdpjyaikdjfx Ahvefd • Productivity enhancements: increases productivity and improves wood yield. • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. • Saw motor power: 5. 5 kw • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: ready for operation (used), Year of construction: 2019, Circular Metal Saw manufactured in 2019. This Other Struers Magnutom 5000 features a cutting capacity for round material up to Ø 151 mm and rectangular material of 151 × 403 mm. It has a continuous power of 11 kW and a maximum positioning speed of 70 mm/s. Consider the opportunity to buy this Other Struers Magnutom 5000 Circular Metal Saw. Contact us for further details. • Cutting capacity (Max) – Magnutom 400: • Round material: Ø 151 mm • Rectangular material: 151 × 403 mm • Flat material: 92 × 550 mm • Cutting motor: • Continuous power (S1): 11 kW • Intermittent power (S3): 16 kW • Cut-off wheels – Magnutom 400: • Wheel size (Diameter × Thickness × Bore): 432 × 3.0 × 32 mm • Rotational speed (rated load): 1000–1950 rpm Hjdpeyh Hpksfx Ahvofd • Cut-off wheels – Magnutom 500: • Wheel size (Diameter × Thickness × Bore): 508 × 3.5 × 32 mm • Rotational speed (rated load): 1000–1850 rpm • Positioning and feed: • Cut-off wheel positioning range: • Y-axis: 385 mm • Z-axis: 235 mm • Maximum sample height under cut-off wheel: No limitation • Maximum positioning speed: • Y-axis: 70 mm/s • Z-axis: 50 mm/s • Feed speed range: 0.1–10 mm/s • Cutting force: 0–1400 N • Cutting table (fixed, Magnutom 400/500): 827 × 781 mm • Cutting chamber: • Width: 1000 mm • Depth: 1206 mm • Height: 918 mm Additional equipment • Optional X-table: • Maximum size: 942 × 781 mm • Minimum size: 673 × 781 mm • X-axis travel: 269 mm • T-slots: 12 mm, bi-directional

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Hedpjyufixsfx Ahvofd Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings Hodpfx Asyudqujhvjfd • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: good (used), Year of construction: 2003, functionality: fully functional, power: 5.5 kW (7.48 HP), Max. cutting length: 5300 mm Max. edging height: 2100 mm Max. cutting depth: 80 mm Digital display for horizontal and vertical cuts Hfedpfx Ajyucmhshvod Saw unit: 5.5 kW Saw blade diameter: 300 mm Unit pneumatically tiltable Dimensions (LxHxW): 6620 x 2948 x 1480 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 25352, functionality: fully functional, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,750 rpm, total length: 6,500 mm, overall weight: 1,000 kg, Equipment: documentation/manual, saw blade guard, scorer, Type: 6220 a xy3 Model: Standard III Machine no.: 25352 , Year of construction: 1995 , Power supply: 3/400V/50Hz/10 Amp. Motor: 4.4 kW , Saw blade speed: 4730 rpm , Saw blade diameter: 300 mm , Scoring unit , Cutting capacity: 5300x2200x80 mm Hfedpfx Aeyuckaohvod

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW Hfsdpfxoimd D Aj Ahvsd cutting length approx. 2450 mm saw blade diameter approx. 150 mm pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length Hfjdpeyub Iqsfx Ahved 18.5kWh saw engine

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Hfsdpfx Aoyub Hmshvsd Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: excellent (used), CATALOG NUMBER 7918 TECHNICAL DATA - Max. saw blade diameter: 450mm - Spindle diameter: 30mm - Pneumatic top clamp - Blade guard - Blade guard also functions as a hold-down clamp - Pneumatic blade feed - Cutting height (at 250mm width): 120mm - For lower cutting heights, the cutting width is increased - Main motor power: 6kW - Extraction nozzle diameter: 120mm - Table dimensions (LxW): 650x850mm - Table height from base: 1000mm - Roller tables: - Infeed roller table + stop: 3180mm - Outfeed roller table + stop: 2450mm - Roller width: 360mm - Operating pressure: 8 bar - Overall machine dimensions (without roller tables) LxW xH: 1300x1050x1800mm - Weight: 550kg FEATURES – 2 roller tables – Pneumatic blade stroke – Used saw, in perfect condition Hfjdpfjyrr R Dsx Ahved Net price: 14,900 PLN Net price: 3,550 EUR (based on EUR rate of 4.2) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7921 TECHNICAL DATA - max main blade diameter with scoring unit: 400mm - max cutting height: 100mm - electrically adjustable cutting height – with display - electrically adjustable cutting angle – with display - blade tilt: 90° – 45° - spindle diameter: 30mm - equipped with sliding table - cutting length on sliding table: 3120mm - cutting width at fence: 1580mm - with side table - with scoring unit - max scorer diameter: 125mm - scorer rotation speed: 8500 rpm - main motor: 5.5kW - 3 spindle speeds: 3000/4000/5000 rpm Hodpfx Aeyrrt Sshvefd - extraction port diameter: 100/130mm (oval) - table dimensions with extension and widening: 1800x1900mm - blade guard - overall dimensions (L/W/H): 3500x4200x1500mm - weight: 930kg ADVANTAGES – Italian manufacture – electric adjustment of the main blade up/down + angle – with scoring unit – unpainted – used saw, very good condition Net price: 23,900 PLN Net price: 5,690 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1998, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 6605/9-811 - Max. cutting height vertical [mm]: 1900 - Max. cutting height horizontal [mm]: 1800 - Max. cutting width [mm]: 4000 - Max. cutting depth [mm]: 40 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 Financial information Hfjdpfoyrruvox Ahvod VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2002, condition: used, 2002 Camam US/1C Chair Leg Equalizer. Hfedpfjvcc Rlex Ahved Bench cm. 70x70

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN - used - PC control with optimization, scoring unit, automatic cutting length detection, side pressure device, air cushion tables, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, cutting width: 4,200 mm, max. cutting height: 72 mm, number of clamps: 6 pcs, max. saw unit feed: 100 m/min, max. rip fence feed: 80 m/min, main saw motor power: 11 kW, scoring saw motor power: 1.5 kW, main saw blade Ø: 300 x 30 mm, scoring saw blade Ø: 180 x 30 mm, dust extraction port Ø bottom: 140 mm, Hsdpfx Ahsyrqrtovofd dust extraction port Ø at pressure beam: 3 x 100 mm, airflow: 5,000 m³/h, compressed air connection: 6 bar, air consumption: 140 l/min, rated current: 38 A, max. pre-fuse: 50 A Quality information: - complete basic inspection - complete basic cleaning - electrical system checked - immediately ready for operation

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hfodpsyrpmcjfx Ahvod