Used sand blasting equipment for sale (157)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Dkodpfewc Afhex Ab Tep Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: Dkedpfx Absun R N Ao Tep ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, Year of construction: 2026, functionality: fully functional, Machine type: Vapormatt Vapormate Manufacturer: Vapormatt The Vapormate is our highly versatile, manual entry-level system. It is a very popular option for users who require a compact unit for smaller workspaces or wish to trial wet blasting technology before investing in a larger system. The Vapormate is equipped with all the features you would expect from one of our larger manual systems. The wet blasting process was invented by Vapormatt in the 1950s. Through over 70 years of development, Vapormatt has created an ergonomic and cost-effective solution: the Vapormate. The integrated water recirculation system ensures efficient use of consumables. Wet blasting provides gentler and more uniform processing compared to, for example, sandblasting, thanks to the water carrier medium. This technique enables you to achieve smooth and consistent surfaces on your components. Further technical information can be found in the attached brochure. The stated price is net, plus the currently valid statutory VAT and shipping costs. The images may depict the system including accessories, which are optionally available at additional cost. The quoted price refers to the base machine only. If you are interested, we look forward to hearing from you. We are happy to provide you with personalised and non-binding advice. The European Commission offers a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our products. Contract negotiations are carried out by means of telecommunications (email, telephone, message portal). Initially, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice (Impressum) and information regarding your right of withdrawal, before any purchase or contract is concluded. Dedpsyq Ri Nsfx Ab Tskp

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement Dkedeyn Inwspfx Ab Tjp - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Four-axis controlled shot blasting booth for cleaning die-casting molds, steel rings, permanent molds in aluminum casting, tire molds, press dies, and more. The travel path of the blasting nozzles is freely programmable. 2 automatic nozzles and 1 manual blasting nozzle for subsequent cleaning of the parts. Hardox rotary table and conveying screw for long-lasting operation of the blasting system. Dkodpfxedrtane Ab Top For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. Dksdjynz Idspfx Ab Tsp - Very high warranty period.

Condition: new, Bernardo SB 4 Sandblasting Cabinet Work area dimensions: 1110 x 820 x 810 mm Air consumption: 680 l/min Dedpfjd Tb Uzsx Ab Tokp Required air pressure: 8.6 bar Hopper capacity: 148 liters Sleeve opening: 180 mm Air connection: 3/8" Weight approx. 160 kg

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m Dedpfx Abjynr E Te Tokp - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Dkedoynr E Hopfx Ab Tjp Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear Dkjdpfxoynr Emj Ab Tjp - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 1,112 mm, total height: 2,391 mm, total length: 1,237 mm, type of input current: three-phase, overall weight: 750 kg, workpiece weight (max.): 30 kg, input voltage: 400 V, space requirement width: 2,700 mm, space requirement length: 2,000 mm, power: 3 kW (4.08 HP), Equipment: cabin, documentation/manual, lighting, We are selling our mint condition BMF TWISTER blasting machine (demonstration model), built in 2025. The machine operates fully automatically and without compressed air. The workpieces rotate in a cloud of blasting media and are thus blasted on all sides. The desired settings (e.g. blasting time, speed of the blast wheel) are simply entered via a touch panel. The entries can be saved as recipes and reused later. No skilled personnel required. Quick workpiece change system, up to 100 workpieces per blasting cycle. Dkedsym T Ugepfx Ab Tsp Many commercially available blasting medias can be used, e.g. stainless steel, glass or ceramics. The system includes a suitable extraction system. Inspection and test blasting of customer parts are possible at our premises.

Condition: new, 0 1170 x 580 x 580 mm operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min Dodpfx Aeupxd Djb Tekp weight of the machine ca. 0,15 t

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar dimensions 1,0 x 0,61 x 1,65 m 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t Dsdpfx Abeupw Smo Tskp

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside Dkjdpfx Aow Rrcwob Tjp - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: new, dimensions: innen 1160 x 580 x 580 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 120 kg total power requirement 1,2 kW weight 115 kg range L-W-H 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting * are switched on and off at the same time * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle Dkodpfsxak Dqex Ab Tsp - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: excellent (used), Year of construction: 1990, Description to follow! Djdpfxoxzk Ils Ab Tskp

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Possible to come and see in testing. Dkodpfx Asygnm Dob Tep

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Dkedpfx Abovgbcus Tsp Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Dkodpfxowurhij Ab Tep Weight: 2,500 kg Very good condition.

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dodpsdrr U Ssfx Ab Tokp Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2026, Trough belt, centrifugal impeller, shot blasting system, 7.5 kW, directly driven impeller turbine with 8 impeller blades. Belt width 700 mm and diameter 600 mm. Dkodog S Rt Espfx Ab Tep

Condition: new, ROBOBlast: Automated Precision Sandblasting Experience the power of ROBOBlast, our state-of-the-art robotic sandblasting system designed for precise, efficient, and consistent surface preparation. Perfect for industrial applications requiring high performance with minimal human intervention. Dkodswf Dr Ujpfx Ab Tjp ROBOBlast: Robotic Sandblasting Solutions The ROBOBlast system offers a highly efficient and precise robotic sandblasting solution tailored to the needs of modern industry. Engineered for performance, it automates surface preparation, ensuring consistent results with minimal human intervention. This system is the ideal choice for companies looking to optimize their surface treatment processes. Precise and Efficient Surface Preparation ROBOBlast delivers consistent sandblasting performance on a variety of surface types and materials. Automation enables greater accuracy and consistency, eliminating the variability that can accompany manual operations. Whether for small or large projects, ROBOBlast ensures high-quality surface preparation every time.

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Dkodpfxsxl Dq Us Ab Tsp

Condition: good (used), Blasting System MHG SMG 45 K (Negative Pressure Cabinet) - Working area: 1100x660x700mm Dkodpfeyib Dfox Ab Top - Integrated extraction system - Two side doors / dust-tight sealing - Double-walled, sound-insulated with foam - Blast gun with nozzle - Operating pressure: 3–7 bar - On/Off – Lighting – Extraction - Pressure regulator – Manometer – and foot switch - Viewing window Dimensions (LxWxH): 1.5x1.6x1.8 meters / 380 kg Subject to errors and omissions.

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW Dkodpfx Aeyddufsb Tep The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.