Used Sanding Unit for sale (31,958)

Condition: used, Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm Iedpfjb Uhvlsx Adnsa -Weight: 292 kg/piece

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm Isdovzqc Hjpfx Adnea -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm Iedpjiuc Sgjfx Adnoa 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder + combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Isdjxtxhkspfx Adnoa Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Iodpfxovxd Tts Adnoa Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Iedpfxjxlk Rbe Adnsa Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg Isdpoihfawofx Adnsa 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Year of construction: 2008, condition: excellent (used), I sell the widebelt sanding machine SGJ 1300R-RP. Year 2008 Configuration: steel cylinder / motor 37 KW combi unit rubber cylinder + pad / motor 22 KW Iodekd Am Espfx Adnja Cleaning unit with dust extraction Feeding speed adjustable with variator Pressure pads for short elements on each unit. Infeed and outfeed table for long elements. Working height 3-150mm Working width 1300mm Total power 64 KW Total weight 4000kg Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. 3 motors 55 + 45 + 37kW Including full documentation. Condition very good ! Available immediately. Ijdpfjt Rn E Tex Adnja

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 10 drawers – large format, approximately 116 x 101 cm inside the drawer – each drawer has its own bearing. Ijdpfx Adjxzuncjnsa Made in Germany

Condition: used, Used Extraction unit comprising : Ø 1 DE DIETRICH stainless steel reactor • Capacity : 310 litre • Electric heating: 6 x 2 kW • Frame agitation Ø 1 stainless steel heat exchanger Isdpfxjxyxn Dj Adnsa • Surface area : 2 m² • 29 tubes - Ø 20 x 150 mm Ø 1 stainless steel vessel 600 litre • Ø 900 x 1300 mm Ø 1 liquid ring vacuum pump • Type LOHE 25309 • Motor : 2.2 kw - Hp 3– Rpm 3000 – 3x 220/380 volts Specifications: Capacity: 82 gal Diameter: 35.4" Straight Side: 51.18" Material of construction: stainless steel Type of stainless: DE DIETRICH stainless steel

Condition: ready for operation (used), functionality: fully functional, type of cooling: air, Industrial Cooling Fan Unit EIV-7B with 11 kW Motor + Heat Exchanger Complete industrial cooling/ventilation assembly previously used for insulator cooling. The set includes a centrifugal fan EIV-7B, a 11 kW three-phase motor, a mounting frame, and a heat-exchange module. Removed from a working installation during system modernization. Ijdpfx Adoxznylonsa Technical Specifications Model: EIV-7B Airflow: approx. 7000 m³/h Speed: 2880 rpm Motor Power: 11 kW, 3-phase, 400 V Fan Type: centrifugal / radial Mounted on a steel base frame Equipped with a heat-exchanger block (can be sold together or separately) Suitable for industrial cooling, ventilation, energy systems, filtration, HVAC, etc. Condition Mechanically in good working order Previously operated via a frequency inverter Removed from a functioning installation

Condition: used, In this offer you purchase a used accessory ‘Canon Document Insertion Unit N1’ Object of sale: 1 x Canon Document Insertion Unit N1 for various Canon models Iedpfx Ajt Rfh Eednja Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows Isdjvg U Dxspfx Adnja Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Isdpfx Adertnv Denea

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: Ijdpfew A Ng Ejx Adnja 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t Isdpfjxcg Hmex Adnsa dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: ready for operation (used), functionality: fully functional, operating pressure: 12 bar, pressure: 28 bar, oil tank capacity: 200 l, Parameters Manufacturer: Howden Power A/S (Denmark) / PMC Technology A/S Model: BTVAB-7 (Hydraulic Oil System for BTV-7) Year of manufacture: 2007 Pumps: 2 × 5.5 kW motors, 1410 rpm Flow rate: 12 cm³/rev Operating pressure: 12 bar Maximum pressure: 28 bar Oil tank capacity: approx. 150–200 L Filtration: Magnehelic pressure differential gauges, multi-stage filtration Piping: Stainless-steel hydraulic lines Configuration: Dual-pump system (duty + standby) Condition: Structurally sound, fully complete Origin: Elektrėnai Power Plant (Lithuania) Application: Lubrication and hydraulic actuation for BTV-7 bearings and mechanisms Fully equipped Howden / PMC Technology hydraulic oil system, designed for lubrication and hydraulic control of heavy-duty industrial bearings and damper mechanisms. The system includes two hydraulic pump motors, complete stainless-steel piping, pressure control blocks, flow meters, and Magnehelic filtration indicators. Originally part of the BTV-7 booster draft fan set at Elektrėnai Power Plant and used only intermittently. Mechanically intact, ready for recommissioning after basic cleaning and servicing. Suitable industries: Power plants Biomass & waste-to-energy plants Petrochemical & refinery applications Steel & heavy industrial facilities Industrial ventilation & draft systems Any operation requiring high-reliability hydraulic lubrication units Iodpjxy Hk Tefx Adnea

Condition: good (used), Eurolube A11740 Lubrication Pump & Filter Graco LD Series Tank Filling Pump Iodpfx Aot Rgugjdnsa Orion Electronic Oil Dispensers x 2 Visual Oil Level Indicator Approx. 250 l. Holding Tank

Condition: as good as new (ex-display), Year of construction: 2021, Cooling capacity: 26 kW Year of production: 2021 Country: manufactured in Italy Airflow: 5,000 m³/h Dimensions: 920 x 1120 x 720 mm Condition: very good, new Ijdpfoqrpihex Adnja Quantity of product: 4 pcs. Working temperatures of the AHU: -40/+70 °C Clivet AQX10, 26 kW (Year of manufacture – 2021), quantity 1 pcs. – 920 x 1120 x 720 mm, Airflow(2.5 m/s) – 5 000 m³/h

Condition: used, In this offer, you are buying a used ‘Ricoh Multi Folding Unit FD5020’. Subject of sale: 1 x Ricoh Multi Folding Unit FD5020 for various Ricoh Pro models Iodpervhz Uofx Adnsa Ricoh Pro C7100 Series Ricoh Pro C9100 Series Ricoh Pro C7200 Series Ricoh Pro 8200 Series Ricoh pro 8300 Series Condition: This is a used device that may show signs of use. (small scratches or yellowing). The device has been functionally tested. Packaging and shipping: You are welcome to come and see the appliance during our office hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping are available on request! For further information, please contact us personally.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Ijdpjxw U Eaefx Adnoa Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Year of construction: 2006, condition: repair required (used), functionality: not functional, machine/vehicle number: 059061003, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by 31/12/2025! The offer includes: MBO T800.1/642/R (year of manufacture: 2006; serial number: 059061003) MBO Z-2 knife folding unit (year of manufacture: 2008; serial number: 82 06 10 09) MACHINE DETAILS Electrical specifications Mains voltage: 400/50 V3~ / Hz Control voltage: 24/25 V – / A Current consumption: 2.5 A Isdpfx Adexyfagsnja Fuse rating: 16 A Note: Only units 2 & 3 as well as the knife folding unit are available. There is a defective electronic component at the delivery section. The feeder is missing.

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT Iodpfx Aev Dpyvjdnja CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters Isdpoxpva Aefx Adnsa - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum