Used Sanding for sale (1,899)

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m Isdpfeylp A Dox Aa Eeaw

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Iaedpfxjx Tt Uuo Aa Esw Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 1,300 mm, TECHNICAL DETAILS Working width: 1,300 mm EQUIPMENT Vacuum conveyor belt Iasdpozktntofx Aa Esw Satinizing roller Brush roller EA dust extraction machine with high-pressure blowing system and rotating nozzles Ionization for statically charged dust Cross-grinding unit with belt blowing device Longitudinal grinding unit, infinitely adjustable speed, with belt blowing device Calibrating roller can be activated via the control panel

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Equipment and technical specifications: Iaodpozk Nucefx Aa Esw Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Iasdpezd Hngsfx Aa Eew Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Condition: new, Number of sanding units 2 st. sanding width 300 mm Sanding height max. 300 mm Iasdpfjy Sbk Usx Aa Eow

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Iasdpfx Aaovu Hgbe Eow Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ijdpewnh Eqefx Aa Esaw Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: used, Colour: Grey Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Ijdewnh Avjpfx Aa Esaw Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Year: 1998 - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1/2 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Isdpfxezlidao Aa Eoaw Belt length: 2,700 / 3,200 mm Grinding height: 350 mm Table swivel: 45 / 20° Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction nozzle diameter: 80 mm Dimensions: 1,200 x 2,450 x 2,100 mm Weight: 390 kg After the refurbishment, the machines feature an updated electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers installed, and come with a complete set of accessories. We look forward to receiving your questions and inquiries.

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 mm Grinding height: 350 mm Table swivel: 45 / 20° Isdpfx Aozlicvea Esaw Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction port diameter: 80 mm Dimensions: 1,200 x 2,450 x 1,500 mm Weight: 320 kg After the overhaul, the machines feature a revised electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers, and come with a complete set of accessories. We look forward to receiving your questions and inquiries.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Table size: 3000 x 1000 mm Drive power: 4.0 kW Belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Belt length: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: - Two belts for pre- and finish grinding - Triangular guide for the belts, providing unobstructed visibility and freedom of movement - Pneumatic belt tensioning with ball bearings - Adjustable belt speed - Tilting of the belts up to 90° - Belt self-centering Iajdpfxozlh Nzo Aa Ejw - Pneumatically opening belt channels - Manual workpiece movement in 3 axes - Each axis with brake or locking mechanism - Vacuum clamping for the workpieces

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg Iaodpsd R Ev Dofx Aa Ejw - free for collection - Can be shipped for an additional fee.

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Isdpscqm Rrsfx Aa Eeaw Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. Iodpfx Aaefig Rws Eeaw The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Ijdpoff Ed Tefx Aa Esaw Availability: Short-term

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Iaedpfxsff Hdgo Aa Eew Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Iedey Ehiwjpfx Aa Eoaw Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Ijdpfx Aslht H Noa Eoaw Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Iedpfxsy Iu N As Aa Eeaw Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Iaodpfx Aov Sk Nnoa Esw Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. Iaedshqb Rcjpfx Aa Ejw 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Ijdpfx Aaszbyt Ee Eeaw Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Iasdexgvcxopfx Aa Eow Space requirement height: 1.1 m Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), functionality: fully functional, machine/vehicle number: P260713250, 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 𝘐𝘵𝘦𝘮 𝘋𝘦𝘴𝘤𝘳𝘪𝘱𝘵𝘪𝘰𝘯 Machine Name: Steinemann NOVA LAM 180 Manufacturer: Steinemann Technology AG Machine Type: Wide Belt Sanding and Sand Brushing Machine Application: Surface calibration and finishing of HPL, CPL, and decorative laminate panels Working Width: 1,800 mm (Nominal) Process: Bottom sanding / Sand Brushing Operating Principle: Continuous conveyor feed with abrasive belt sanding and brushing units 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • High-precision calibration and surface finishing. • Suitable for High-Pressure Laminate (HPL) and Continuous Pressure Laminate (CPL). • Vacuum belt conveyor for stable material transport. • Rubber-coated counter-pressure roller. • Infrared abrasive belt tracking and monitoring. • Automatic feed speed control under overload conditions. • Driven top and bottom feed rollers. • Reversible contact drum rotation (with or against feed direction). • Guaranteed thickness tolerance up to ±0.025 mm. • Optional automatic thickness adjustment. • Optional ionizing bars for electrostatic discharge. 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Parameter: Specification Working Width: 1,800 mm (Model NOVA LAM 180) Machine Opening: 150 / 300 mm Production Speed: Up to 72 m/min Contact Drum Diameter: Ø 275 mm Iodpfjzmgicsx Aa Eoaw Abrasive Belt Length: 2,620 mm Thickness Adjustment: 0.01 mm increments Working Height: 1,400 mm Minimum HPL Thickness: 0.4 mm (0.3 mm under specific conditions) Minimum CPL Thickness: 0.2 mm 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Decorative laminate production • Furniture panels • Interior wall panels • Compact laminate finishing • Surface preparation before coating or printing • Fine surface sanding and brushing 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • Excellent surface quality. • High dimensional accuracy. • Stable production at high speeds. • Reduced material waste. • Reliable continuous operation. • Suitable for high-volume industrial manufacturing. 𝗦𝗮𝗳𝗲𝘁𝘆 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • Automatic overload protection. • Abrasive belt monitoring system. • Emergency stop system. • Safety guards around moving parts. • Controlled feed system for operator safety. 𝗥𝗼𝘂𝘁𝗶𝗻𝗲 𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 Frequency: Maintenance Task Daily: Clean sanding area and vacuum system Daily: Inspect abrasive belts and brushing units Weekly: Check conveyor alignment Weekly: Inspect pressure rollers Monthly: Lubricate moving components according to manufacturer recommendations Monthly: Verify belt tracking and sensor operation As Required: Replace abrasive belts and brushes 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗖𝗼𝗻𝘀𝘂𝗺𝗮𝗯𝗹𝗲𝘀 • Abrasive sanding belts • Sand brushing rollers • Conveyor belts • Pressure rollers • Bearings • Vacuum filters 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻 The Steinemann NOVA LAM 180 is a high-precision industrial sanding and sand-brushing machine designed for calibrating and finishing laminate surfaces. It combines wide belt sanding technology with brushing operations to achieve consistent thickness, superior surface quality, and excellent production efficiency. The machine is widely used in the laminate, furniture, and decorative panel industries where high-quality surface finishing is required. Please note that this description may have been translated automatically. Contact us for further information. The information in this classified ad is only indicative. We recommend checking the details with the seller before a purchase.