5
Industrial cleaning machine 2 in 1. Cleaning with dry ice or with conventional H2O ice, at the push of a button.
Comes with carrying case and 6 nozzles for all types of work.
Yu2dcw
The machine is practically new.
9
OFFER 22095
Technical data:
- Steel tank 200 L
- Blasting gun with pressure hose 10 m
- Full pneum. Remote control
- sieve
- Air consumption depending on blasting nozzle from l/min
- Blasting material quantity regulation
- Compressed air connection 0 to 12 bar
Pl3jxchp
- Compressed air tank with cleaning opening
- Space requirement approx. W 750 x H 1600 x D 900 mm
- Weight approx. 200 kg
Abrasive media Steel shot - S110 to S330
Blasting cycle time - 1-10 minutes
Diameter of the rotary table - 1000 mm
Manufacturer of the blasting turbine STEM - Slovenia
Number of turbines and power -1 x 5,5 kW
Diameter of the turbine wheel - 330 mm
Velocity of abrasive - 78 m/s
Abrasive trown per wheel - 110 Kg/min
Opening / closing of the door - manual
Inside lining Manganese steel – X120Mn12
Bucket elevator - 0,75 kW
Table motor power - 0,37 kW, with invertor
Max. load on the table - 600 kg.
...
7
Agtos continuous overhead conveyor plant designed with Caldan P&F 400 conveyor system.
The plant was operated only with aluminum blasting granules. There is no plant wear due to the abrasive.
Pegni3i
Manganese plates are not integrated, can be retrofitted if required.
Per side 4 blasting turbines with 7,5 kW each.
The throughput time of the product carriers is adjustable.
Operating hours approx. 28,000 h
If required, the plant can be purchased with conveyor system and product carrier.
3
The machine is in operation and in good condition. Last service was in May 2021
The machine runs on average 2h/day
Qglef
Operating and maintenance manual, as well as installation plans available.
EXW-Hofkirchen, ex works, unloaded.
Terms of payment:
80% upon receipt of order confirmation
20% on collection
in each case immediately net after receipt of invoice
Safety standard:
The machine complies with the European CE regulations.
Delivery date: to be agreed, plant available immediately
5
Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm
Pwolyq
7
the machine in perfect condition very good machine
This is a combo machine pelletizer and sandblasting machine (two in one)
B3izq7g9hc
very low operation hours
2
OWPK-4 shot-blasting machine with travelling table
Commissioning October 2008.
Hdnbml7tw
Technical data
1. dimensions
- max. height above "0" level - 7.1 m
- max. depth below grade "0" - 2.3 m
- max. outside length - 17 m
- max. external width - 6,2 m 2.
Weight of the entire equipment - approx. 40 t
Load capacity of the rotary travelling table - 10 t. 4.
Max. dimensions of the cleaned casts
- diameter - 2,9 m
- height - 1,5 m
Total installed power approx. 150 kW 6.
6. compressed air
- pressure -...
6
Dimensions: 3510 x 2820 x 5520 mm
Bg7lxqj0eh
6
Manufacturer: Bird & Schemmann
Year of construction: 1964
Weight: ca: 4000 KG Masch. No.: 14992/4576
General information / technical data:
gebrauchteSchleuderrad rotary table Strahlanlagefuer steel granulate in one age according to good condition
Table diameter: 1250 mm maximum workpiece height: 300 mm
Number of centrifugal wheels: 2pcs
Spin wheel diameter: 350 mm
Dwzmqjjt
Power / spin cycle: each 4KW
The machine space requirement:(b x t x h) approx 4000 mm x 3600 mm x 3500 mm
Power supply / po...
5
Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm
Bys78n8ppy
3
OWPS - 3.5 x 2.0 Planetary Shotblasting Machine with Traversable Turntable
Basic filter - dry, bagged, polyester, regenerated by fan
collection of dust into a big bag
Hdnkkpgmu
Guaranteed degree of dust behind the final filter below 2mg/m3
Note: Cleaned air is exhausted directly to the hall
Dimensions
- max. height above level "0" - 9 m
- max. depth below the level "0" - 2,2 m
- max. length - 13 m
- max. width - 11 m
Weight of the entire equipment - approx. 55 t
Bearing capacity of travelling tu...
15
rotary blasting machine shot
Caoevgunfg
8
- SANTBLASTING CM 1000 - Johan Taus (Austria).
Ca0p0be7xd
- Table diameter - 1000 mm
- 1x blast wheel, power 5,5kW
- equipment after complete refurbishment
- equipment with inspection report
- filter unit with shaving
- total power 8 Kw
- total height - 3450 mm
Blasting equipment, blasting, blasting, blasting, sandblasting, blasting.
7
Fratelli Pezza 1200mm-es vertical automatic glass sandblasting machine.
Automatic gun: 2
Cbusai2scg
Manual gun: 1
Working height: 1200mm
Power supply: 400V 50Hz
5
AUTOMATIC ROTARY SANDBLASTER RBM-750-12
Land Reko's RBM Series are compact rotary blast machines designed to blast cylindrical shaped parts. The work piece to be blasted is mounted on an electrically driven rotary work table. The blasting nozzles move parallel to the workpiece axis on one or two sides independently. The design of the machine ensures efficient exposure to the abrasive stream and 100% coverage of the stream during a single cycle, providing a repeatable surface with a homogenous s...
6
through-put width 1000 mm
working heigth 600 mm
total power requirement 1,5 kW
weight of the machine ca. 0,4 t
B72os03ywo
dimensions of the machine ca. 2 x 1,6 x 1,7 m
9
through-put width 820 mm
working heigth 810 mm
Air consumption 680 l/min.
air pressure 8,6 bar
weight 160 kg
148 Liter
0 Arm Loch 180 mm
air clutch 3/8" Zoll
Furnishing:
- Working space: 1110 x 820 x 810 mm LxWxH
- very stable construction
- Jet head (grain size 0.149 - 0.250 mm can be used)
- Container for blasting material
Nloaj
- dust extraction
- foot switch
- Lighting in the work area
- Operating instructions in German
- Transport dimensions / packed: 1350 x 1000 x 1100 mm
5
Used but reconditioned OMSG overhead conveyor shot blast machine
Type DINAMO 913
Not been used after overhaul.
Manually movable trolley and hook at fixed height.
Year of construction 2012
Blasting hours before overhaul 12.333
Frequency converter 11 KW ( 2 x 5,5 kw)
Cbrhgh8fxz
Speed monitoring bucket elevator
Digital ammeter
New motors new turbines
Without filter
5
filling amount 420 l
weight of the machine ca. 0,4 t
Iskpc8op
type SBC 420
working heigth mm
through-put width mm
total power requirement kW
dimensions of the machine ca. m
6
through-put width 870 mm
working heigth 850 mm
air consumption 400 - 800 l/min
working pressure 3,4 - 8,0 bar
suction capacity 17,4 m³/h
total power requirement 1,2 kW
weight of the machine ca. 160 kg
dimensions of the machine ca. 1320 x 1200 x 1760 mm
Bz9bxy9zi8
- Suitable for various blasting materials, e.g. quartz, glass ball,
Plastic ball, etc.
- Ideal for cleaning, derusting or removing paint from all metal parts
Type, e.g. engine parts, fittings, signs, housings, rims, hinges
- High-q...
9
SEMI-AUTOMATIC DOUBLE STATION CABIN SANDBLASTER SCP-2500-12
The offered blasting machine is a professional, safe and modern device made by a European manufacturer. The sandblasting machine is equipped with a double, independent chute funnel formed at an acute angle to facilitate the sliding of the material, and an inspection drain for quick emptying of the chute from the abrasive. The use of innovative design solutions makes it possible to process workpieces weighing up to 800 kg in a chamber w...
4
Type: FST-26, SN: 19992/5534, Year: 2001
Cbkcjej32w
7
through-put width 580 mm
working heigth 615 mm
discs 570 x 260 mm
Air consumption 400 l/min.
air pressure 2,7 - 5,5 bar
weight 125 kg
Box Width 1200 mm
Furnishing:
- Working space: 1220 x 615 x 580 mm LxWxH
- Jet head (grain size 0.149 - 0.250 mm can be used)
- Container for blasting material
- dust extraction
- foot switch
- Lighting in the work area
- Operating instructions in German
Yr0vuk
6
Wet sandblasting unit, Sandblasting unit - Pressure blasting unit SAPIMasch. No. 43207 Year of construction 1989Canister size 140 litre perm. operating overpressure 10 barAir requirement approx. 3000 litres/min.hose length approx. 8 meter- Valve opens and closes via pneumatic operation at the blasting nozzle- Sandblasting protective hood with compressed air connection- Complete system installed on metal pallet with forklift pockets- Accessories such as connection pieces for blasting nozzles at t...
4
Working space
1100 x 660 x 816 mm (W x D x H)
Blasting chamber
Dust-tight vacuum cabin in stable
sheet steel construction
Working gloves
I7hfr7eb
special rubber, wear resistant, cotton inside,
firmly connected to the cabin against dust leakage
Doors
Blasting chamber W x D x H = 1100 x 660 x 816 mm
Two side doors, dust-tight closing,
double-walled, sound-absorbing foam,
lockable, with electrical shut-off safety device
Blasting media recovery
Via coordinated MHG recovery system
Operation
ON/OFF sw...
2
through-put width 580 mm
Cbcyd78o79
working heigth 580 mm
air consumption 400 - 800 l/min
working pressure 3,4 - 8,0 bar
suction capacity 17,4 m³/h
total power requirement 1,2 kW
weight of the machine ca. 115 kg
dimensions of the machine ca. 1225 x 935 x 1640 mm
- Suitable for various blasting materials, e.g. quartz, glass ball,
Plastic ball, etc.
- Ideal for cleaning, derusting or removing paint from all metal parts
Type, e.g. engine parts, fittings, signs, housings, rims, hinges
- High-qu...
8
TWO STATION CABIN SANDBLASTER SCP-2100-12
The offered blasting machine is a professional, safe and modern device made by a European manufacturer. The sandblasting machine is equipped with a double, independent chute funnel formed at a sharp angle to facilitate the sliding of the material, and an inspection drain allowing for quick emptying of the chute of the abrasive. The use of innovative design solutions makes it possible to process workpieces weighing up to 800 kg in a chamber with working ...
5
type: SPH-3-6/11-0, SN: 20039/5559, year: 2002, separate control cabinet
Cbkcc3bgxb
6
dimensions: innen 1160 x 870 x 850 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 150 kg
total power requirement 1,2 kW
weight 160 kg
range L-W-H 1320 x 1200 x 1760 mm
Furnishing:
- Very large front flap that opens upwards
- Suitable for various blasting materials
* e.g. quartz, glass ball, plastic ball, etc.
- Integrated suction system with exchangeable air filter
- Jet gun without a finger trigger
* The air flow is controlled by a foot pedal
- Four fluo...
7
Machine is equipped with 4 turbine wheels 360 7,5 kW. For continuous blasting process there are 2 pcs of hooks with capacity of 1.000 kg each.Offered machine is fully automatic and has pneumatic door opening system, PLC control of all drives and functions.
Hgsv7g7
5
Blasting unit make MHG type BNP 65 with suction unit
Fug9y9m
9
CM T 5 Shotblasting machine, shotblaster. sandblaster. turbine blaster. table blasting.
- Table type shotblasting machine.
- Full manganese blasting cabin.
- Table diameter 500 mm
- maximum product height: 380mm
- Turbine motor: 2.2 KW
- With the extra option for tumble blasting small parts. including 2x bracket / support for trommel.
Cso7dj9w
- machine is fully refurbished & checked / tested
- In working condition, possibility to test on request ( without media )
- New Siemens S7 PLC co...
6
TWO STATION CABIN SANDBLASTER SCP-1700-12
Offered sandblasting machine is a professional, safe and modern device from European manufacturer. The sandblasting machine is equipped with a chute formed at an acute angle to facilitate sliding of the material and with an inspection trigger for quick emptying of the chute from the abrasive. The use of innovative design solutions makes it possible to process workpieces weighing up to 600 kg in a chamber with working dimensions of 1 350 x 1 740 x 690 mm...
5
Make:, type: and year: unknown consisting of: 1 blasting channel, dimensions: 1,500 x 700 mm, rail system, approx. 30 m, 10 blasting baskets, 1 separate control cabinet Make: Siemens, type: Simatic HMI, roller conveyor: 700 x 2,500 mm, deburring station
Pwyjri
4
dimensions: innen 1160 x 580 x 580 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 120 kg
total power requirement 1,2 kW
weight 115 kg
range L-W-H 1225 x 935 x 1640 mm
Furnishing:
- Very large front flap that opens upwards
- Suitable for various blasting materials
Bqgucqaocl
* e.g. quartz, glass ball, plastic ball, etc.
- With gas pressure springs for quick and easy loading and unloading
- Integrated suction system with exchangeable air filter
- Jet gun wi...
9
Still very good ice blasting machine, used very little, 130 hours.
Eehrci2
5
load capacity: max. 227 kg
Jftwcipg
Wheelpower: 7,5kW
Max. Volume: 170 Liter
Beltmaterial: Rubber Band
3
We offer completly retrofitted wheelblasting machine which hasn't been used since retrofit.
With the retrofit the machine has 2 brand new 5.5kw centrifugal wheel turbines
Machine comes with 50 kg Stainless steel shot.
Sdsf08y
7
Offered blast machine is a professional, safe and modern device from a European manufacturer. The sandblaster is equipped with a chute formed at an acute angle to facilitate sliding of the material and with a revision trigger allowing for quick emptying of the chute from the abrasive.
An important advantage of using CLEMCO brand valves and carbide nozzles in our equipment, as well as blasting hoses that carry the material, is the ability to dose any type of abrasive - both quartz sand and glass ...
6
type: 3, SN: 69756, year: 1995, diffuser: 1.800 x 1.400 mm, hanging warning system, L: approx. 30 m, control cabinet make: Siemens, touch screen, 11 jet baskets
C7p2fub
13
Injector indexing table blasting machine
Diameter of the table ca.: 1000 mm
Jc9hu9h9k
Exhaust air volume ca.: 1500 m3/h
Compressed air consumption: 4 mm air nozzle, 6 bar ca. 61 m3/h
4 mm air nozzle 8 bar, ca. 78 m3/h
Operating voltage: 400 V
Support voltage: 230 V
Installed power ca.: 7 kW
Weight of cabin ca.: 1500 kg
Measures complete ca. (LxWxH): 3680 x 4170 x 3270 mm