Used sand blasting equipment for sale (142)

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). Cgjdpfx Aewvgbgekcet -Year of manufacture: 2024 -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel -Automatic parts detection -Automatic abrasive flow control -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear

Condition: used, Sandblasting Machine, Surface Cleaning Equipment, Sandblasting Cabinet, Used Machine Compressor: Manufacturer: Atlas Copco Type: XAS 90 Year of manufacture: 1992 Max pressure: 8,5 bar Deutz engine Cedpfx Akoy H I U Nocogt Overall dimensions: Width: 1500 mm Depth: 3500 mm Height: 1300 mm Tank dimensions: Ø 630 × 1200 mm – 2 pcs Dust chamber dimensions: Width: 930 mm Depth: 630 mm Height: 1390 mm Sold in the condition shown in the pictures, with accessories.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, The machine is fully functional and complete. Cedpfx Akjy H D I Socsgt

Condition: used, functionality: fully functional, machine/vehicle number: N/A, The GH-4 type shot blasting machine is primarily recommended for surface cleaning and treatment of cast, forged, and pressed parts in bulk using shot blasting. Blasting chamber dimensions: Rubber belt width: 1,300 mm Belt disc diameter: 1,150 mm Max. workpiece load weight: 800 kg Shot charge: 800 kg Blasting heads: Number of blasting heads: 2 pcs Drive motor power: 11 kW Power requirements: Electric: 27.5 kW Compressed air pressure: 6 bar Quantity: 6 m3/h Cgedjy Nbm Dopfx Akcet Dust extraction fan capacity: 5,500 m3/h Our equipment is fully refurbished and offered for sale in like-new condition. Directly from the manufacturer! We can assist with transport and assembly upon request.

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. Cgjdpfx Akswf Dwwecot The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Cgsdpjlf Hq Nofx Akcot Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Cgjdpfx Akswm Ar Necet Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Cgedpfx Akewrxczjcot Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Codpfxjvpgq Ne Akcogt Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: good (used), Year of construction: 2018, Hook type shotblasting machine 500 kg TECNOBLAST GHIBLI 500 S/2 - 10x15 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Csdjwm Attopfx Akcsgt Total height of machine: mm Total length of machine: mm !!! YEAR OF PRODUCTION 2018 !!! Machine is in very good condition. Ready for operationa !!! VERY GOOD !!!

Condition: good (used), Year of construction: 2008, Hook type shotblasting machine 2700x3500 with motorised hook with crane CARLO BANFI Type: Hook type Max. diameter of workpiece: 2700 mm Max. height of workpiece: 3500 mm Max. workpiece weight: 12.000 kg Cgodpewq Ru Hofx Akcot Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Nr. Of turbines: 16 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 16x 11kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: excellent (used), OMSG CWB 850 4/FAC Type: Wire mesh conveyor Max. width of workpiece: 850 mm Max. height of workpiece: 450 mm Nr. Of turbines: 4 Turbine wheel diameter: 350 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included Foundation: no Total width of machine: app. 3.000 mm Total height of machine: app. 5.000 mm Total length of machine: app. 7.000 mm Max installed power: app. 70 kW Cgodpfx Akowm Dbxecst

Condition: good (used), Year of construction: 1988, Equipment: cabin, IEPCO Micropeen Peenmatic 1000 SK with tilting hood with filter tower, blasting guns, manual Special features: Cgsdpfx Aksyk Dm Ijcst - Tilting hood, opening angle approx. 70° - Heating system for abrasive media drying - Conveying system for pre-acceleration of blast media - Pneumatic filter cleaning Working chamber (WxDxH): 800 x 800 x 840 mm Year of manufacture (estimated): 1988 Good, well-maintained condition, operating hours: 600h Overall dimensions (without filter tower): 1800 x 1900 x 2000mm Weight: 530kg (blasting unit), 100kg (filter tower) Sale only to businesses as defined in § 14 BGB.

Condition: used, Year of construction: 1970, input voltage: 220 V, We offer this used Schiele Sch-650.6-W1 sandblasting unit, year of manufacture 1970. Operating voltage: 220/380 V Mains frequency: 60 Hz Control voltage without transformer: 220 V Cjdsy H Empspfx Akcjgt Control frequency without transformer: 50 Hz Factory number: 11477 Wiring diagram no.: Sch-650.6-W1 SKV number: 17.391 If you have any questions or require further information, feel free to send us a message or call us.

Condition: reconditioned (used), I am offering a refurbished turbine - STANĚK MZ350. The turbine is equipped with a 7.5 kW motor. Blast wheel, blasting, throwing turbine. Cgjdpjy H Aklefx Akcet

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, We offer a table blast machine – STEM with a table diameter of 1400 mm. The blast machine features two rotary tables and two turbines, each turbine rated at 5.5 kW. The designed blasting unit is made for semi-automatic blasting of the external surface of parts placed on the rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum workpiece height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Total operating hours: 5,275 Commissioning date: 31.03.2009 Cgedpfjy Hqc Ajx Akcst Machine weight: 5,000 kg Machine length: 3,540 mm Machine height: 5,540 mm Machine width: 6,600 mm Total power consumption: 20 kW Operating parameters Blast wheel, number and type: 2 x WX1M Blast wheel outer diameter: 330 mm Blast wheel speed: 2,900 rpm Abrasive throughput per turbine: 80–90 kg/min Initial abrasive charge: 500 kg Rotary table diameter: 1,400 mm Rotary table speed: 2 rpm Spindle diameter at front bearing: 105 mm Max spindle torque: 2,500 Nm Distance of spindle axis from clamping table surface: 60–560 mm Max. workpiece weight: 1,500 kg

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day Cgodpfx Aehtlw Rskcot - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic sandblasting machine 1500 mm OPEN TOP max. glass thikness : 70 mm number of guns : 2 + 1 manual for max. glass sizes : 1500 x 3000 mm Cjdpfsy Emf Djx Akcogt total machine height : 2300 mm

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Cgedpowdgpgjfx Akcet

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated Cedpfxewdgi He Akcegt as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. Codpfx Akjwdgrzjcjgt The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Hanger Type Shot Blasting Machine (3 turbines, low hours, complete set) Price: 16,500 € (negotiable) Location: Latvia Condition: Very good, low usage Description: For sale industrial hanger-type shot blasting machine in very good condition. Machine has been used minimally (approx. once per week), making it a low-wear unit with long remaining service life. Suitable for cleaning, descaling and surface preparation of metal parts. Technical specifications: * Type: Hanger / overhead monorail shot blasting machine * Turbines: 3 × 7.5 kW * Total turbine power: 22.5 kW * Frequency converters: Yes (for turbine control) * Dust collector: Pulse-jet type * Workpiece max size: approx. 1600 × 900 mm * Max load: ~500 kg * Wear protection: Replaceable wear plates installed * Included: Spare wear parts set Equipment: * Complete control cabinet * Integrated dust extraction system * Hook/monorail system for parts handling * Buckets and some accessories included Condition notes: * Very low operating hours * Fully functional * Regularly maintained Advantages: Csdpfxjy D Eb Io Akcogt * Compact footprint * Energy-efficient turbines with frequency control * Ideal for small to medium production * Ready for immediate use Reason for sale: Not fully utilized Contact: Message for more details, video, or inspection.

Condition: reconditioned (used), functionality: fully functional, We offer a refurbished bucket conveyor from a machine – OMSG SANDER + New motor with gearbox Cgsdpfx Aey Awmtokcot

Condition: refurbished (used), functionality: fully functional, We offer 3 OMSG turbines from an OMSG SANDER machine. The turbines come with new 7.5 kW motors, new drive belts, air valves for abrasive dosing, and a 2800 mm turbine wall from the OMSG SANDER, see photos. The turbines have undergone a complete overhaul with new 7.5 kW motors, abrasive dosing units, and a new air distribution system. Cgjdpfx Akjy Awhwjcot

Condition: new, Year of construction: 2026, Desciption in english language after demand. Cgodpjdulhvjfx Akcot