Used Sandblaster for sale (335)

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking Hfodsz Eq Epspfx Aiton WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Hfodpfjz I Iv Rsx Aitjn Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: used, Year of construction: 2003, functionality: fully functional, SCHLICK Continuous Sandblasting System – fully functional – immediately available For sale is a fully functional SCHLICK continuous sandblasting system, manufactured in 2003. Equipment: - Throwing wheel / impeller wheel - Pressure tank - Automatic abrasive filter system - Automatic abrasive conveying system - Extraction system - Electronically controlled impeller wheels - Complete system in operational condition Hedpfx Aszbzwxoitefn Manufacturer: SCHLICK Year of manufacture: 2003 Factory number: 24/23717 Location: Wollerau, Switzerland Availability: immediate The system operates very well and can be inspected and demonstrated upon agreement. Upon request, we can also arrange for cost-effective dismantling and re-installation within Switzerland. Selling price: €6,900 net plus VAT. Short-term collection is possible. If you are seriously interested, please contact us directly.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Hsdpfx Asz Drfujitsfn Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, functionality: fully functional, Equipment: compressor, We are offering this very well-maintained Joke Microjet2 fine jet blasting machine, manufactured in 2025, including a maintenance-free compressor, also manufactured in 2025, and the dust collector for the blasting system. The blasting machine and compressor have a combined operating time of approximately 5-6 hours. The oil-free compressor is from Cleanair, and the dust collector is also from Joke. Hodpfx Asz I Dyxjitsfn If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Hsdpfxozu Slre Aitsfn

Condition: used, Year of construction: 2015, Sandblasting system Sclick Schlick Surface Technology / Sandblasting systems Hodjz Nhv Uepfx Aitefn Dimensions: 80 cm deep, 100 cm wide

Condition: used, Sandblaster GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Hsdpsz Nycysfx Aitofn Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg

Condition: excellent (used), Year of construction: 2022, total width: 640 mm, total length: 1,150 mm, total height: 670 mm, pressure: 10 bar, air demand: 72 m³/h, tank capacity: 40 l, overall weight: 72 kg, Selling a complete media blasting kit, including: - NOVGOM40 media blaster - Sieve for abrasives, 50 mesh - Double venturi nozzle, tungsten carbide, 6.5 mm diameter - Nova3 helmet kit - Cable harness for blaster + 10 m extension cable - Cooler, ref. 2521 Hfsdoz Rw Rqopfx Aitsn

Condition: excellent (used), Sandblaster Internal dimensions: Depth 550 mm x L 650 mm x H 600 mm Sandblaster dimensions: L 800 mm x W 700 mm x H 1700 mm Vacuum cleaner dimensions: W 600 mm x Depth 500 mm x H 1500 mm 1 defective glove Machine IN VERY GOOD CONDITION Equipped with: Vacuum cleaner Hfjdsz Nyddspfx Aitsn Voltage: 220 V mono

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Hfodpjztkzijfx Aiten

Condition: used, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Hfsdpsz Rw I Aefx Aiton Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm ATTENTION!!! Customer return: the machine is new and complete, but the housing is damaged. No warranty or returns!

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar Hfjdszdqtmjpfx Aitjn System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Hsdpfxsz Dfzco Aitefn Chamber dimensions: 1200 x 1850 mm. The equipment has 3 turbines.

Condition: used, Year of construction: 2017, functionality: fully functional, pressure: 10 bar, tank capacity: 200 l, overall weight: 113 kg, hose package length: 10,000 mm, Manufacturer: Szatkowski s.c. Type: OP-1/200 Year of manufacture: 2017 Hedpsz E D Drsfx Aitefn Factory number: 627 Working pressure: 14.3 bar Test pressure: 10 bar Capacity: 200 l Medium: air + abrasive material Maximum operating temperature: 50°C Minimum operating temperature: -10°C CE 1433 Tank manufactured by PPU KOMNINO.

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz Hfsdpfx Aijz Dt T Tjten

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm Hfjdezvdfaepfx Aiten - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Hfedpfx Aioz R T Eleton Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: good (used), Year of construction: 2006, 1 used abrasive blasting system Manufacturer: GLÄSNER Type: DSK 1500 W Year of manufacture: 2006 Factory number: 5162-003 Technical data Working area: 1,400 × 1,150 × 900 mm Max. operating pressure: 6 bar Drive power: 2.2 kW Process: Abrasive blasting Abrasive blasting tank: included Turntable: included Lighting: included Dust extraction and filtration unit Hfsdpfx Aiszyx Sietsn Compressed air treatment Viewing window / gloves: included CE The system was used exclusively for blasting stainless steel and is in very good condition.

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Hsdpsx Dkx Nofx Aitofn Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Hedpfxjz Nx S Te Aitofn The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: good (used), Complete sandblasting system by Rösler, including manual blasting cabinet, blower, and extraction unit. Manufactured in 2010, in excellent technical condition. Dimensions: HxWxD approx. blasting cabinet 200 x 150 x 150 cm, weight 450 kg. Professional-grade equipment, which has been rarely used. Regularly maintained – in technically flawless condition. The machine can be inspected under power. Available from calendar week 22, 2026. Dismantling, removal, shipping, and reinstallation can be organized. If you have any questions, simply write or call: Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg All prices net plus 19% VAT. Subject to prior sale and errors. Hfodpfx Aioyx El Notsn

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Hsdpfx Aijy N Tbmjtefn Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Hodpoygnm Dofx Aitofn Possible to come and see in testing.

Condition: ready for operation (used), SALES OFFER FOR A COMPACT, ROBOTIZED SANDBLASTING BOOTH KUKA robot configuration: KUKA Robots KR 10 R1420 Configuration/Config.: Basic CYBERTECH NANO version: KR 10 R1420 CYBERTECH NANO A1-A3 cable set: Robot cable set A1-3 KR10 Mechanics color RAL: 260580 KUKA Orange Base color: According to layout/parts list Sign language: See layout/parts list CYBERTECH NANO warning signs: KR CYBERTECH NANO warning signs High-gloss finish: No high-gloss finish Trade fair finish: No trade fair quality Measurement type: Not position-accurate Material number: 10022523 CN/HS Code: 84795000 Robot is lightly used Sandblasting booth: 1800 x 1700 h 2300 The booth frame is made of thick-walled 80/80/3 steel profile. The walls are made of chipboard. The robot is mounted to the ceiling of the booth. A 200 mm diameter dust extraction pipe outlet is located on the outside of the booth. The robot is protected from dust by a cover made of special fabric. The abrasive material is in a closed circuit. The abrasive material is drawn from a hopper located in the lower part of the booth. The side wall has a door. The front wall has a rotating table – while the robot is sandblasting a particular item inside, the operator places the next item to be sandblasted outside the booth. There is no need to open the door to exchange the workpiece. Both the door and the rotating table are automatically locked when the robot is sandblasting. The control cabinet is located separately, away from the booth. The booth can be easily enlarged or adapted for spray painting. Hfjdpfx Aszhrq Ueiten Working space: width 1400, height 1200, depth 400. Minimum price: 17,000 EUR net