Mobile filtration system

Oliver Fritz GmbH & Co. KG TFPA15.250.M

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Ljdpfew Ivpvex Af Sert

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Lredpfx Aolxyhfef Sot Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Lsdew Ivp Nopfx Af Sjrt

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Ledpfx Afedrtalj Ssrt a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor. Ljdpjvu D Dwefx Af Sert

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off Lrjdpfx Ajwvgbgjf Set - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Lodpforq Hmzsx Af Ssrt Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Year of construction: 2006, condition: used, Submerged arc welding device, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, rail runner Lodpod Nlf Nsfx Af Sjrt -Submerged arc welding machine without: power source -Submerged arc welding machine type: Minisaf 02 -Control box SUBARC 3 -Intermediate hose package -Equipment -Dimensions: 1200/800/H500 mm -Weight: 215 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SH-30S PRECISA 400V Spindle Moulder The CORMAK SH-30S PRECISA 400V spindle moulder is a powerful and precise woodworking machine designed for professional wood processing in industrial plants, woodworking shops, and craft workshops. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it provides the highest standard of performance when milling straight elements as well as complex profiles and shapes. Ljdpfx Afevugf Ds Ssrt Main advantages of the machine Stable cast iron table construction – provides excellent vibration damping and smooth movement of the workpiece. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm – allows processing of various types of wood and wood-based materials. Reinforced and balanced spindle – ensures quiet, precise operation without vibrations. Height adjustment with scale – enables accurate setting of machining parameters. Complete standard equipment included – including tilting fence, workpiece holders, and assembly tools. Compliance with safety standards, DTR documentation, and CE requirements – ensures safe operation and conformity with regulations. Construction and technology The CORMAK SH-30S PRECISA spindle moulder is based on a high-quality cast iron body, which effectively eliminates unwanted vibrations during operation. The 620 x 510 mm working table has been precisely ground to ensure smooth and even movement of the workpiece. The 2.2 kW (400V) motor provides sufficient power even during intensive operation. With a spindle stroke of 100 mm and a maximum tool mounting height of 105 mm, the machine is capable of handling a wide range of milling applications. Precision and working efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with practical functionality. Multi-stage spindle speed adjustment allows optimal matching of operating parameters to the type of material and cutting tool being used. Precise guides and fences enable accurate positioning of reference points, resulting in excellent repeatability and consistently high-quality machining results. Applications The CORMAK SH-30S PRECISA is suitable for: Professional woodworking companies and production facilities, Furniture workshops and craft studios, Manufacturing decorative mouldings, grooves, tongues, tenons, and joints, Processing edges of straight and curved components. Standard equipment Tilting fence adjustable 60° left/right, Workpiece holder, Workpiece stop, Anti-slip feet, Assembly tools. Optional equipment Interchangeable spindle with ER20 collet chuck – enables quick machine setup changes and adaptation to different tools. Available at an additional cost of PLN 700 net.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Lrodpfxoygnm Do Af Sjt Possible to come and see in testing.