Used press brakes with 150-199t bending force for sale (159)

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Hjdpswcd Spsfx Ag Djfr Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: new, Condition new Pressing force 175 tons bending length 3050 mm axes Y1 / Y2 and X axis Control: Durma Sky 22 rapid traverse Y axis 200 mm/s stroke 265 mm Distance between uprights 2600 mm Overhang in the side stand 450 mm Installation height 530 mm Drive concept servo-hydraulic, up to 72 % power saving Working speed Y-axis 10 mm/s Retracting speed Y-axis 500mm/s Backgauge travel X-axis 650 mm Backgauge speed X-axis 500 mm/s Backgauge speed R-axis 350mm/s Hfjdpfjh H Dnbsx Ag Djr backgauge travel R-axis 250 mm Table height 900 mm Table width 104 mm Motor power 15 kW length 4250 mm width 1700 mm height 2890 mm Weight 10900 kg 3 axes (Y1, Y2,X) CNC CONTROL DT-15 - 2D graphic display 15 - Intuitive touch-screen operation (simple drawing of the bending contour with the finger) - Direct programming of the bending angle - User-friendly programming in dialog form - Graphic simulation of the bending process - Automatic calculation of the stretched length for sheet cutting - Graphical product and tool memory - Correction option - Manual, semi-automatic and fully automatic working mode - Tonnage calculation/programming by the CNC - Internal data memory - USB connections for backup and program storage Servo motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC controlled crowning Intermediate pieces for upper die clamping die holder for 60 mm dies Laser protection device Fiessler AKAS mounted on upper beam Sheet support arms on linear guide Side and rear guards Equipment according to CE regulations Operating instructions in GERMAN and ENGLISH (symbol photo) Various options and equipment variants possible.

Condition: used, Year of construction: 1982, pressure:150 t Hedpfxeidrg Hs Ag Defr chamfer lenght:3100 mm distance between columns:2700 mm total power requirement:15,0 kW weight of the machine ca.:10 t dimensions of the machine ca.:3,115 x 1,66 x 2,785 m throat:400 mm stroke:150 mm dayligth:450 mm

Condition: new, Year of construction: 2024, Folding length 3020 mm Pressing force 135 t Infeed speed 140 mm/s Bending speed max. 10 mm/s Retraction speed 130 mm/s Stroke 320 mm Installation height 550 mm Projection 450 mm X-travel 750mm X- speed 300mm/sec. R- travel 250 Hfedpfoq Rdtqex Ag Djr R- speed 100mm/sec. free column passage 2555 mm Machine length 3730 mm Machine width 2300 mm total height 2850 mm Machine table height 900 mm Motor power 15 kW Oil tank 190 l Machine weight 9500 kg (technical data may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Double-guided press beam, stable and precise Stable back gauge, double-guided Manual stop fingers double-guided on linear guide Sliding front arms with height adjustment Side and rear protective covers Lower die adapter rail 60 mm Man. Top tool clamping system (Promecam system) Manual crowning Foot switch with emergency stop switch 380 V, 50-60 Hz, 3 phases LED lighting Recommended options: Dener control unit DA 66T Fiessler AKAS 2M laser finger guard + FPSC Safety PLC (manual) X-R axis with servo motors CNC crowning for high bending accuracy 2 additional stop fingers - Further processing lengths and thicknesses are available with corresponding accessories! -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: K 3945, working width: 3,100 mm, stroke length: 300 mm, pressing force: 170 t, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Connected power: 11 kW Working range Hsdpfx Aswlqa Sog Dsfr Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Weight: 12,500 kg Top beam stop time: < 94 ms

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Hfedpfovxipgsx Ag Dsr Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 47,052 h, machine/vehicle number: B0505A0010, stroke length: 445 mm, pressing force: 170 t, working length: 3,000 mm, TECHNICAL DATA Bending length: 3,000 mm Press force: 170 t Stroke (long stroke): 445 mm Drive and control system WILA hydraulics: top and bottom Backgauge: 6 axes MACHINE DETAILS Operating pressure: max. 300 bar Stop time: 95 ms Hfjdpowa T E Hsfx Ag Der Voltage: 3×400 V Rated current: 38.0 A Frequency: 50 Hz Connected load: 26.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Press weight: 12,200 kg Operating times Machine on: approx. 73,037 h Hydraulics: approx. 47,052 h Press beam: approx. 5,200 h Strokes: approx. 2,817,583 Crown: 575 h / 962,704 cycles EQUIPMENT - Laser light barrier - Die shift - 2x support arms Last service performed: 10/2023

Condition: excellent (used), Year of construction: 2000, Technical data: Working length: 3100 mm Stand width: 2760 mm Pressing force: 170 tons CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2;, Z1/Z2 Hfodpsv Inxrefx Ag Djr Automatic crowning Motor-adjustable back stop Projection: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (length x width x height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 new upper tool 1 new 4-sided die The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; Used machines are sold without any warranty.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS Hfedpfx Ajmkhynsg Der weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm