Used press brakes with 150-199t bending force for sale (158)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,700 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 10,500 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 6+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China Dwjdpsztpmwefx Akvsa 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan Dwedpfx Asy U Hmgskvoa 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Capaciteit: 3600 x 150 ton BC55 CNC-besturing Dodpfx Akoztaxdovewa Bouwjaar: 2000 CNC-bombering Euro-gereedschapsklemming

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm Dwsdpfozrzt Hjx Akvja distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: used, Year of construction: 2015, For sale: professional hydraulic CNC bending press AMADA HFE M2 170-3. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Dodpfozrw Akox Akvjwa Key information: Manufacturer: AMADA Model: HFE M2 170-3 Date of manufacture: 2015.06 Bending force: 170 T (1700 kN) Working length: 3000 mm Maximum bending length: 3340 mm Motor hours: 16,615.07 Technical parameters: Distance between columns: 2700 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 18 kW Machine dimensions: Length: 4470 mm Width: 2625 mm Height: 3140 mm Weight: 12400 kg Equipment and features: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Dwsdpfx Akszrxftsvoa - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 Dwodpfxsy Thmxs Akvoa - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools Djdpfx Ajztm U Eokvjwa

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 73332117063, functionality: fully functional, pressing force: 175 t, stroke length: 265 mm, total length: 4,100 mm, total height: 2,900 mm, overall weight: 12,000 kg, working width: 3,050 mm, No minimum price – guaranteed sale to the highest bidder! Dodpfozquplex Akvswa Submitting a bid commits you to collecting the item on time between September 21st and October 1st! TECHNICAL DETAILS Press force: 175 t Stroke: 265 mm Working length: 3,050 mm Control: Durmazlar DT-15 Upper tools, weight: 11 kg Lower tools, weight: 16 kg Tool cabinet, manufacturer: Apfel MACHINE DETAILS Overall length: 4,100 mm Overall width: 1,800 mm Overall height: 2,900 mm Total weight: 12,000 kg EQUIPMENT - Various bending tools - Punches - Dies - Other bending tools - Workshop drawer cabinet, manufacturer: SSI Schäfer - Contents of the workshop drawer cabinet suitable for the machine External reference: Lebtig - Lot 77

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm Dsdpfx Ajxaa Eqjkvswa * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Dwjdozrnrcepfx Akvja Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Dodpfxszrnpuj Akvewa Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Dodpeza U Nfsfx Akvowa Bending Length 4250 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Dedox D Ilyspfx Akvewa Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Machine still under power Technical Specification Bending Length 4080 mm Dimensions Machine Depth 5000 mm

Condition: excellent (used), Year of construction: 2020, Edwards Pearson EPT-CNC-ECO-174x3200 Press Brake Dwedpfx Asyrnfqokvea Serial number: 201105B Year of manufacture: 2020 Axes: Y – Beam up/down movement X – Adjustment of back gauge and bending distance R – Back gauge up/down movement Crowning – Bending angle compensation Machine with EP10 control, 1750 kN nominal force, 3200 mm maximum bending length, Lintech SLA-3 laser protection, Wonder Foot control, and an extensive tool set.

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Dsdpfxjzqux To Akvswa Cannot be tested. Collection only.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 9,584 h, pressing force: 153 t, total width: 1,700 mm, total height: 2,820 mm, overall weight: 11,000 kg, controller manufacturer: DELEM, controller model: DA-69T, product length (max.): 3,400 mm, number of axes: 4, This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details. - Control System / Software: Delem DA-69T CNC Control (4 axes)- Operating Hours: 9,584.1 hours- Maximum Operating Pressure: 300 bar- Distance Between Uprights: 2600 mm- Ram Stroke: 215 mm- Installation Height: 525 mm- Throat Depth: 300 mm- Working Height (without table/tools): 900 mm- Rapid Advance Speed: 150 mm/s- Working Speed: 0 - 9.8 mm/s- Return Speed: 100 mm/s- Safety Speed: < 10 mm/s- Stopping Time: 0.15 s- Safety Distance: 270 mm- Ram Dwell Time: 0 - 9.9 s- Drive Power: 11 kW- Total Connected Load: 15 kW- Voltage / Frequency: 400 V / 50 Hz (3 PEN)- Control Voltage: 24 V DC- Current Rating: 30 A- Fuse Protection: 35 A- Hydraulic Tank Capacity: 270 L- Max. Oil Operating Temperature: 80 °C- Oil Filtration on Filling: < 25 µm- Sound Level: < 70 dB(A)- X-Axis Travel Range: 600 mm (Max speed: 400 mm/s, Accuracy: +/- 0.02 mm, Motor torque: 1.9 Nm)- R-Axis Travel Range: 200 mm (Max speed: 200 mm/s, Accuracy: +/- 0.05 mm, Motor torque: 1.9 Nm)- Z1-Z2-Z3-Z4 Axis Adjustment Range: 2400 mm (Manual adjustment)- Crowning System: Mechanical crowning system by Wila (0.6 kW, controlled via CNC)- Tool Clamping / System: Wila Modufix- Operating Ambient Temperature: +5 °C to +40 °C- Operating Humidity: 30% to 95% (non-condensing)- Included Accessories & Tooling:* Foot control panel* Technical documentation (1 set)* Sheet support arms: 2x 1m, 2x 0.5m* Punches (Upper Tools): 5x 515mm (28°, H200); 2x 100mm (28°, H200); 1x 200mm (28°, H200); 1x each 20mm, 30mm, 35mm, 40mm (28°, H200); 2x 100mm (28°, H200 with corner notch); 2x 255mm* Dies (Lower Tools): 5x 515mm (12x30°, R=1, H55); 6x segmented (12x30°, R=1, H55) [Total width 3m]; 4x 515mm; 1x 475mm; 8x segmented [Total width 3m]; 1x 515mm (50x80°, R=5, H55); 1x unspecified; 1x 200mm (V=8, 30°, R=1, H55)* Tool extensions: 1x 1240mm (H140, L410), 2x 50mm (H100), 4x custom-made (H100) Technical Specification Bending Length 3100 mm Dwedpezm Unyofx Akvea

Condition: refurbished (used), PRESSBRAKE PROMECAM TYP RG 154 Dwjdpfx Asd R Ay Rekvsa PRESSURE 150t SHEET METAL LENGHT 4000mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Dwjdpozpxt Eefx Akvea Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Dwodpfxox Npiys Akvja Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34368, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table length: 3,050 mm, table height: 950 mm, throat depth: 400 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, Equipment: CE marking, safety light barrier, Hydraulic press brake LVD PPEC-5 170/30 Touch Year of manufacture: 2008 Serial number: 34638 Technical specifications Force: 1700kN Working length: 3050mm Distance between uprights: 2600mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Table width: 150mm Approach speed: 100mm/s Working speed: 10mm/s Return speed: 100mm/s Weight: 11000 kg Motor: 15kW COMMAND CONTROL CNC TOUCH LITE CNC 5 axes Y1 Y2 X R V • Table V-axis PP8170 • Reach of X-axis: 600mm • CE marking “PP3580” • Top tool clamping Eurostyle, 15 pcs • Back gauge X-R duo PP8098 • 2 front supports Dwodpfjzl Uchex Akvsa • 2 fingers on back gauge

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Table width: 100 mm Djdjzl Ahrspfx Akvewa Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Crowning: Yes Power: 11 kW Length: 5200 mm Width: 1730 mm Height: 3240 mm Weight: 10500 kg

Condition: like new (used), Year of construction: 2023, Exhibition press – 159 tons Year of manufacture: 2023 Control system: Delem Da-66T with touchscreen Pressing force: 36 tons Bending length: 1300 mm Stroke: 150 mm Approach speed: 150 mm/s Working speed: 10 mm/s Return speed: 150 mm/s Connected power: 21 kW Power supply: 400 V / 50 Hz / 3~ Dwsdpfx Ajzcldljkvea Tool clamping force: 50 bar Dimensions (L × W × H): 2050 × 2050 × 2310 mm Weight: 4350 kg

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm Dwsdpfxjiwfp To Akvea - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Dwedpfxszk H A Ds Akvsa Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front