Press brake

Dener Abkantpresse XL30135

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is Iedpfx Ahsfg E Hps Noht adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Ihedocgmf Rjpfx Ah Not Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Isdowq Dpqjpfx Ah Njht Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Year of construction: 2011, functionality: fully functional, CNC Turning Center with Bar Loader Manufacturer: Miyano Type: ABX-64SYY Year of Manufacture: 2011/06 Control: Fanuc 31i-B Technical Specifications: Workpiece Length SP1/SP2: 118mm / 125mm Bar Diameter: 64mm Turning Diameter: 165mm Number of Turrets: 2 Speed: 6,000 rpm Machine Weight: 11,000kg Ihsdowdh U Rjpfx Ah Not

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Ihjdpfxjwlvlgs Ah Net Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Year of construction: 2006, condition: like new (used), The wafer and biscuit factory that benefits from a continuous, fully automated production process and has two main lines: wafers and biscuits. The wafer line has a capacity of 35-40 kg/h with a wafer weight of 45-55g and obtaining three quality types: 1. wafer weight = 45g/pc, cream layer = 1.25:1 – capacity –2.77 t/24h 2. wafer weight = 45g/pc, cream layer = 1.35:1 – capacity –2.89 t/24h 3. wafer weight = 45g/pc, cream layer = 1.50:1 – capacity –3.05 t/24h The line is equipped with a packaging machine and the collection and reuse of the scraps resulting from the cutting process is done automatically. Ihodpfol Siv Sjx Ah Net The biscuit line has a capacity of 300 - 500 kg/h and three qualitative types can be obtained: 1. simple 2. sandwich 3. caramel 4. cocoa 5. glaze Simple biscuits can be: Strength = 300-400kg/h Soft = 400-500kg/h Crisps = 350-500kg/h The production is continuous, automatic, the line being equipped with a caramelizing device, sandwich, with 30 sets of shapes, chocolate coating device, including packaging and 5 temperature zones with independent, automatic temperature control.

Condition: new, Year of construction: 2025, Applicable Material: metal Ihodpfx Aheg Eghde Nst Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Thinker Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: Bodor Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 Isdjww Nazjpfx Ah Neht driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, x-travel 1050 mm Iedpfx Ahjvnh Umj Nsht y-travel 600 mm z-travel 600 mm control Fanuc weight of the machine ca. 7200 kg

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm Ihedsfk Et Aspfx Ah Nst spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet