Used press brakes with 150-199t bending force for sale (159)

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system Hfjdsd Srk Sepfx Ag Der 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE Hjdpfx Aswbuursg Defr MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Year of construction: 2022, condition: new, machine/vehicle number: Bull15_1, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Hjdpjh I D N Tjfx Ag Defr Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, MVD Synchronized Hydraulic Bending Press Mod. I-Bend B 3100 175 ESA S860 Touch color videographic numerical control Controlled axes No. 7+1 ( Y1-Y2-X-R-Z1-Z2-A1 ) WILA motorized compensation table Multi-beam barriers NEW ELECTRONICS DSP LASER UNIMEC high-speed motorized rear register (Made in Italy) GIVI MISURE optical scales (Made in Italy) Bending length mm 3100 Power exerted Ton 175 Recess mm 410 Stroke mm 260 Hfjdpjfh Nz Eofx Ag Dor Opening mm 465 Upper tools and lower die ROLLERS supplied

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Hfodpfslp Iq Rox Ag Der Stroke: max. 800 mm Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning Hfedpfx Aown Ebiog Dor - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor Hfsded Tpadepfx Ag Der - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Condition: used, Year of construction: 2005, operating hours: 34,000 h, pressure 170 t chamfer lenght 3050 mm distance between columns 2700 mm Stroke beam 300 mm 520 mm 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec 600/1000 mm 200 mm Z1+Z2 axes controlled by cnc 0-2500 mm Number of working hours 34000 h Dimensions of machine: Hfsdpfsru Rz Sox Ag Djr length 3600 mm width 1950 mm height 3300 mm weight 12000 kg Control Cadmann total power requirement 24 kW dimensions of the machine ca. 4x2x3,3 m

Year of construction: 2016, condition: new, machine/vehicle number: Cone G40 neu, Electromechanical CNC press Hfedpfx Ash I D N Ejg Der Manufacturer: CoastOne Oy Type: Cone G40 Pressing force: 1500 kN Bending spindles: 6 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard Cbgdzvzgpj - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm Hsdpfxjtqqr Re Ag Dofr dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Hfjdpfxjwnagtj Ag Dor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 23,713 h, machine/vehicle number: 10-968, controller model: Cybelec Modeva 10 S, stroke length: 410 mm, pressing force: 175 t, TECHNICAL DETAILS Pressure force: 175 t Bending length: 3550 mm Stroke (max.): 410 mm Control: Cybelec Modeva 10 S MACHINE DETAILS Machine dimensions (LxWxH): 4500 x 2380 x 3500 mm Machine weight: 14,500 kg EQUIPMENT - Controlled axes: Y1, Y2, X, R, Z1, Z2, crowning - Wila tool holder - Hydraulic upper and lower tool clamping - Lasersafe FIESSLER - 2x material support arm - 2x manual stop fingers - Two-hand foot operation Hedpfx Asv E I Uzjg Djfr - Die displacement

Year of construction: 2024, operating hours: 32 h, condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Hodpfx Agodx Nluo Dsfr Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Condition: good (used), Year of construction: 2008, working width: 4,100 mm, stroke length: 290 mm, overall weight: 11,000 kg, pressing force: 160 t, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Hfedpswi Sktsfx Ag Der Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Year of construction: 2016, condition: new, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G40 Pressing force: 1500 kN Bending spindles: 6 Servo motor power: 5 kW Bending length max: 4100 mm Free machine frame passage: 4200 mm Frame Width: 5014 mm Frame height: 2950 mm Frame depth: 1970 mm Frame Type: O-frame Table height: 1000 mm Machine weight: 7000 kg Mounting height: 600 mm Y-axis, bending stroke: 280 mm Y-axis, Repeatability: +/- 0.002 mm Y-axis, bending speed: 10 mm / s Y-axis, Anna marriage approach speed: 100 mm / s Y-axis, Rueckzugsgeschwindigkeit: 100 mm / s X axis. Speed: 500 mm / s X-axis Repeatability: +/- 0.025 mm X-axis stroke: 600 mm Hfsdpfjb Hbpgsx Ag Dsr X-axis, max. Duration: 800 mm Delta X-axis, speed: 100 mm / s Delta X-axis Repeatability: +/- 0.025 mm Delta X-axis travel: +/- 50mm R-axis, speed: 100 mm / s R-axis Repeatability: +/- 0.05mm R-axis stroke: 200 mm Z-axes, Geschwidnigkeit: 2500 mm / s Z axes Repeatability: +/- 0.5 mm z-axis, traverse: 100 - 3000 mm

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine Hfedpfx Asgih Iueg Der - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps. Hfedpfjrq D Niox Ag Djr

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg Hfjdekh Niqspfx Ag Dsr

Year of construction: 2024, operating hours: 33 h, condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Hedpjdx Nm Tofx Ag Dofr Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Plasma cutting machine equipped with a THERMAL DYNAMICS generator of 300 Amperes, expandable to 400 Amperes. Hedpow Al Rmsfx Ag Dsfr

Year of construction: 2020, condition: new, machine/vehicle number: Bull15_1, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers Hfjdpfx Asfmh Svsg Der 36 months warranty after installation

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning Hedpfx Aogi Dlpog Djfr So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 2020, condition: new, machine/vehicle number: G40_1, Electric press brake G40 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 4100mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system Hedpofmh Stefx Ag Defr - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months Hfjdpfsh Ranpjx Ag Djr - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-3116-PRO DA-66T Specifications - Nominal bending force: 1600 kN - Motor power output: 15.0 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 9700.0 kg - Oil tank: 210 l - Maximum bending length: 3100 mm - Distance between side frames: 2550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 540 mm - Maximum stroke: 260 mm - Table width: 60 mm - Throat depth: 410 mm Tools Hfedju T H Iqopfx Ag Djr - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation 1 day to 8 hours—machine installation and training 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation 24-month warranty Lead time: 6-8 weeks Not applicable if a machine is immediately available. The machine is brand new. Warranty and post-warranty service provided by the seller. The Customer is responsible for the machine during unloading and transport within their facility.