Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Crsdpfx Ais Ah Ei Noiji Note: The machine is sold without a melt filter, water bath, and strand granulator.

Year of construction: 2010, condition: used, CNC control system FIDIA with handwheel; travel ranges: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm; clamping table, length x width x height, 2 pieces, each approx. 2,000 x 2,000 mm; table load max. 1,000 kg; milling spindle, spindle power S1 / S6 approx. 7.4 kW / 12 kW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, feed rate X-, Y-, Z-axis up to 16 m/min, axis acceleration m/s², machine footprint approx. 14,000 x 2,600 x 3,650 mm, with self-built table, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine has already been disassembled and stored. The machine is already located at a different location in Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Crjdpfj Af Nl Ujx Aiiei

Year of construction: 2022, condition: ready for operation (used), Plastic processing machine manufactured in 2022. This RAPID 400-60 includes a Pulsotronic metal detection unit, a machine base frame, and a material extraction system with a cyclone separator, ductwork, and filter bag. If you are looking to get high-quality plastic processing capabilities, consider the RAPID 400-60 machine we have for sale. Contact us for further details. Credo Ah Shtopfx Aiiji

Condition: good (used), Year of construction: 2014, clamping force: 7,000 kN, *ENGEL DUO 2550/700* *Clamping unit* • Clamping force: 7000 kN • Opening stroke: 1700 mm • Mold height: 450–1300 mm • Max. daylight: 2150 mm • Platen size: 1510 × 1440 mm • Distance between tie bars: 1100 × 960 mm • Max. mold weight: 11,000 kg • Ejector: 250 mm / 95 kN *Injection unit 2550* • Screw diameter: 80 mm • Screw stroke: 310 mm • Max. injection capacity: 1558 cm³ • Recommended shot size (1D–3D): approx. 402–1206 cm³ • Max. screw speed: 163 rpm • Injection rate: 441 cm³/s • Max. injection pressure: 1640 bar • Plasticizing capacity: 80 g/s (3-zone screw), 101 g/s (barrier screw) • Nozzle: 600 mm / 110 kN • Heating: 34 kW, 5 zones Credpfe Ah R Rnjx Aiiei *Other* • Pump drive power: 55 kW • Oil capacity: 690 l • Weight: 21.5 t + 7 t Injection unit data per ENGEL catalogue for 80 mm screw and unit 2550.

Year of construction: 1990, condition: used, Clamping force: 250kN, operating voltage: 380V, heating power: 3.46kW, pump motor power: 7.5kW, total power: 11.3kW, weight: 1.5t, with documentation, has been serviced. Csde Ah Tyxopfx Aiijri

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Output capacity 750kg p/h Crjdpoz Azz Eefx Aiiei

Year of construction: 2004, condition: used, Operating pressure: 210bar, injection unit force: 111kN, clamping force: 600kN, max. opening stroke: 340mm, mold installation height: 200-500mm, rated current, circuit 1: 29A, rated power, circuit 1: 15kW, supply voltage, circuit 2: 400V/50Hz, rated current, circuit 2: 66A, rated power, circuit 2: 46kW, AC control voltage: 230V, DC control voltage: 5/±15/24V, protection rating: IP54, weight: 6.63t, operating hours: 96,973h, with CE marking and documentation. Codpfxe Ah Tyfj Aiiori

Condition: excellent (used), Year of construction: 2013, WITTMANN BATTENFELD MACRO POWER E450/2250 INJECTION MOLDING MACHINE Manufacturer: Wittmann Battenfeld GmbH, Austria Model: MacroPower E450/2250 Year of Manufacture: 2013 Control System: UNILOG B6 Type: Hybrid, horizontal injection molding machine Machine Number: 134481-100 Operating Hours: 76,623.41 h 1. CLAMPING UNIT Clamping Force: 4500 kN / 450 tons Tie Bar Spacing (H × V): 950 × 700 mm Minimum Mold Height: 330 mm Maximum Mold Height: 780 mm Electric Ejector System Ejector Force: 60 kN Ejector Stroke: 180 mm 2. INJECTION UNIT Screw Diameter: 65 mm Maximum Injection Weight: 980.9 g Maximum Injection Pressure: 2070 bar Maximum Injection Speed: 400 mm/s Servo-electric Drive for the Injection Unit Knödler Drive Screw with Check Valve 3. DRIVE AND CONTROL Hybrid Drive UNILOG B6 Control System Servo S0 Package ServoPower S1 Package – hydraulic pump speed control Integrated Filtration System Control System in Polish Operating Hour Counter: 76,623.41 h 4. ADDITIONAL EQUIPMENT Compressed Air Valve Crodpo Ah Hkhsfx Aiiji Cooling Water Flow Regulator Digital Interface for Controlling up to Six Thermoregulators Interface for Controlling Valve Pins in the Mold Interface for External Hot Runner Controller Integration with Wittmann W8xx Series Robots Quality Control Button Electric Ejector Integrated Hydraulic Filtration System

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Crsdpfo Ahx A Ijx Aiiji Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Hydraulic Oil Tank Capacity: 720 l Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: used, Year of construction: 2011, input voltage: 400 V, pressure: 7 bar, total width: 4,600 mm, total length: 6,700 mm, type of input current: three-phase, space requirement height: 2,050 mm, space requirement length: 6,700 mm, space requirement width: 4,600 mm, No. 3289 Corner cleaning machine Rotox EPA 479 + WTS 427 Used, year of construction 2011 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site CNC corner cleaning machine for welded PVC window frames and sashes Turning table WTS 427 for automatic infeed, outfeed and turning of the frames Automatic processing of all 4 frame corners Mobile control console with Windows-based PC visualisation Working range Outer frame size min. 350 x 350 mm, max. 3000 x 3000 mm Clear inner dimension min. 190 x 190 mm Profile width 40 - 140 mm, profile height 40 - 180 mm Pneumatic workpiece clamping Machining units Knife unit for visible surfaces, top and bottom Vertical CNC milling unit for the gasket groove Knife units for inner corners, vertical with draw knife Radius unit and inner corner bevel Outer corner milling unit with contour milling disc, tool Ø 170/200 mm, 5500 rpm Horizontal milling unit Outer corner plunge knife unit Tooling as per tool list with contour milling disc Ø 190 mm, carbide milling cutters as well as visible surface knives, draw knives and plunge knives Programs and tools set up for the profile system previously used Connected loads Power supply 3/N/PE 400 V, 50 Hz Current consumption 21 A, upstream fuse 3 x 32 A slow-blow Operating pressure 6 - 7 bar Air consumption approx. 430 l/frame CE marking Installation dimensions approx. 6700 x 4600 x 2050 mm LWH Machine without turning table approx. 2000 x 1800 x 2050 mm LWH Weight approx. 2400 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Crjdpo Ah I Dksfx Aiiei Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, 2 Kowin 232 extruder pelletizing lines for sale one brand new 2024, second 2011 good working conditions output capacity 275Kg per H Cedsz D T Nbepfx Aiijri genuine reason for selling

Year of construction: 1996, condition: used, lamping force: 500kN, max. holding force: 37kN, mold protection force: 3-37kN, max. opening force: 37kN, max. increased opening force: 194kN, max. opening stroke (adjustable): 375mm, min. mold installation height: 250mm, max. distance between platens: 625mm, clear distance between tie bars: 320x320mm, platen dimensions: 490x490mm, max. ejector force: 38kN, max. ejector retraction force: 26.7kN, max. ejector stroke (hydraulic): 150mm, screw diameter: 25mm, screw L/D ratio: 20, max. screw stroke: 100mm, max. shot volume: 49cm³, max. nozzle contact force: 60kN, max. nozzle retraction stroke: 180mm, total installed power: 15.5kW, length: 4030mm, width: 1850mm, height (horizontal/vertical): 2000/3060mm, weight without oil: 3.06t, an on-site inspection is possible. Crodpo Ah Tyiefx Aiioi

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Credo Ahxzfspfx Aiisi Dimensions and weight Length: 6400 mm Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Cjdpfxo Ahxv Es Aiiori Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Width: 1480 mm Height: 2020 mm Machine weight: approximately 3500 kg

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Credps Ahxyhsfx Aiiei Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: good (used), Year of construction: 2011, _Technical specifications:_ • Clamping force: 420 tons (4,200 kN) • Injection unit: 3440 Crodpfx As Ah Dvkeiioi • Screw diameter: 80 mm • Screw L/D ratio: 25 • Maximum injection speed: 300 mm/s • Maximum screw speed: 280/240 rpm • Ejector force: 120 kN (boost 180 kN) • Reinforced clamping drive • Dry cycle time:

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 50-180 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 50-180 CX Year of Manufacture: 2019 Machine Type: Hydraulic Injection Molding Machine Clamping Force: 500 kN / 50 tons Screw Diameter: 30 mm Machine Description We offer a KraussMaffei KM 50-180 CX injection molding machine, manufactured in 2023, with a clamping force of 500 kN (50 tons), equipped with an injection unit featuring a 30 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 500 kN / 50 tons Mold Opening Force: 40 kN Column Spacing (H × V): 370 × 370 mm Mold Opening Stroke: 400 mm Minimum Mold Height: 200 mm Maximum Distance Between Platens: 600 mm Ejector Stroke: 100 mm Ejector Force (forward / backward): 23 / 10 kN Maximum Mold Weight: 630 kg Injection Unit Injection Unit Type: SP 180 Screw Diameter: 30 mm L/D Ratio: 23 Maximum Injection Pressure: 2025 bar Injection Volume: 85 cm³ Injection Weight: 77 g Injection Speed: 120 mm/s Volumetric Injection Rate: 85 cm³/s Screw Speed: 365 rpm Heating Power: 8.0 kW Nozzle Clamping Force: 50 kN General Data Pump Drive Power: 11 kW Dry Cycle Time / Stroke according to EUROMAP 6: 1.2 s / 259 mm Oil Tank Capacity: 180 l Dimensions and Weight Length: 3530 mm Width: 1410 mm Ceds Ahxuyjpfx Aiijri Height: 1960 mm Machine Weight: approximately 2600 kg

Condition: as good as new (ex-display), Year of construction: 2023, KraussMaffei KM 50-100 PX Injection Molding Machine Year of Manufacture: 2023 Manufacturer: KraussMaffei Model: KM 50-100 PX Type: Electric injection molding machine with a servohydraulic system Clamping force: 500 kN / 50 tons Control system: KraussMaffei MC6 Screw diameter: 22 mm Machine Description We offer a KraussMaffei KM 50-100 PX injection molding machine with a clamping force of 500 kN (50 tons), equipped with a modern, 5-point, knee-joint clamping system with servoelectric drive. The machine features a servoelectric drive for injection and plasticizing, as well as a servohydraulic drive for the injection unit's movement. The KraussMaffei MC6 control system, based on an industrial computer with real-time Ethernet communication technology, ensures precise control of the injection molding process. TECHNICAL DATA Clamping Unit Clamping force: 500 kN (50 tons) Mold opening force: 75 kN Clamping system: 5-point, double knee-joint system, 3-plate Clamping drive: servoelectric Mounting plate dimensions (H × V): 490 × 440 mm Column spacing (H × V): 370 × 320 mm Mold opening stroke: 300 mm Minimum mold height: 150 mm Maximum mold height: 450 mm Maximum clearance between plates: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 17 / 8 kN Injection Unit Screw diameter: 22 mm L/D ratio: 22.7 Maximum injection pressure: 2500 bar Injection volume: 38 cm³ Injection weight: 35 g Injection speed: 125 mm/s Volumetric injection rate: 48 cm³/s Maximum screw speed: 382 rpm Plasticizing rate: 6.0 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Plasticizing system for thermoplastics Electrical and hydraulic equipment Control system: KraussMaffei MC6 Connected power (according to specifications): 6.1 kW Electrical protection: 63 A Installed heating power: 6.3 kW Number of adjustable heating zones in the cylinder: 4 Dry cycle time / stroke according to EUROMAP 6: 1.1 s / 259 mm Oil tank capacity: 120 l Dimensions and weight Cedo Ahxtxjpfx Aiiori Length: 4200 mm Width: 1440 mm Height: 1850 mm Machine weight: 4000 kg (4 tons)

Condition: used, functionality: fully functional, Vendo 4 unidades de aquecimento HB- therm serie 5. Credpo Agxhxofx Aiiei Excelente para quem tem moldes de canais quentes . Data dos aparelhos visíveis nas máquinas.

Condition: good (used), Year of construction: 1997, Arburg 520 V-2000-675/150 Clamping force: 200 tons Year of manufacture: 1997 Crodpfx Ae Ah Iuuoiiei Screw diameter: 50 mm + 35 mm Mold spacing: 52 x 52

Condition: used, Year of construction: 1980, operating hours: 12,345,678 h, functionality: fully functional, total height: 3,400 mm, input current: 32 A, total length: 2,200 mm, total width: 900 mm, overall weight: 6,000 kg, power: 32 kW (43.51 HP), input voltage: 380 V, pressing force: 200 t, clearance between the columns: 800 mm, oil tank capacity: 400 l, stroke length: 500 mm, table length: 700 mm, table height: 980 mm, table width: 800 mm, 200-ton press from Rapp&Seidt, high-speed model, with core lifting device for intermediate plates and external hydraulic unit. Heated platens (drawing cushions) with electric heating, 25 amps each, top and bottom. Platen size 550x550 mm, central ejector. The machine operates smoothly and maintains pressure. Very little oil leakage. The machine is available immediately. Cjdpfx Aj Agvxbjiijri

Condition: used, functionality: fully functional, The ToolTemp TT 162-E temperature control units are for sale. The price is per unit. Medium: Water Heating capacity: 12 kW Cjdpfx Ao Ahxwioiiori Cooling capacity: 35 kW Pump: 4 bar Control system: MP 888/MP 694

Condition: good (used), Brand: Cincinnati Milacron Austria GmbH Type of machine: Vacuum tank Model: V-225/1/6 Codpfx Aij Ahy Tpoijri Machine number: 2026708.50 Year of manufacture: 1999 Pipe outside diameter max.: 2 x 32 Ø Cooling length: 6 mm Spray pump: 5 kW Dimensions (LxWxH): 6600 x 1100 x 1750 mm Weight: 1,200 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RAE 32/2 E Machine number: 2026708.70 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 1450 x 1150 x 2500 mm Weight: 900 kg Brand: Cincinnati Milacron Austria GmbH Type of machine: RSE 32/2 NG Machine number: 2026708.80 Year of manufacture: 1999 Pipe outside diameter max.: 32 Ø Dimensions (LxWxH): 2350 x 1100 x 2000 mm Weight: 900 kg Brand: SICA S.p.A Type: A 10 63 Serial No.: 9912801 Year of manufacture: 1999 Voltage: 380 V Power: 4 kW Pipe Ø max.: 63 mm Dimensions (LxWxH): 5500 x 950 x 2000 mm Weight: 1600 kg

Condition: excellent (used), Year of construction: 2014, Yaskawa Motoman MH6 – DX100 (2014) 6-Axis Industrial Robot | 6 kg Payload | Complete Robot System General Information 1. Manufacturer: Yaskawa Motoman 2. Robot Model: MH6 / MH6-B 3. Controller: Yaskawa DX100 4. Year of Manufacture: 2014 5. Number of Axes: 6 6. Maximum Payload: 6 kg 7. Condition: Used, very good technical condition 8. CE Certification: Yes Robot Specifications 1. Robot Type: YR-MH00006-B00 2. Robot Serial Number: R15052-929-5 3. Order Number: S4V842-1-1 4. Number of Controlled Axes: 6 5. Maximum Handling Capacity: 6 kg Controller Specifications 1. Controller Model: Yaskawa DX100 2. Controller Type: ERDS-MH00006-E02 3. Controller Serial Number: 141053 4. Manufacturing Date: 30 June 2014 5. Power Supply: 3-phase, 400 / 415 / 440 V 6. Frequency: 50 / 60 Hz 7. Rated Power Consumption: 1.5 kVA 8. Rated Current: 4.3 A Included Equipment The robot is supplied as a complete system, including: 1. Yaskawa Motoman MH6 6-axis robotic arm 2. Yaskawa DX100 control cabinet 3. Original teach pendant 4. Robot connecting cables Condition & Maintenance Cjdpo Ah Dg Sofx Aiiori The robot is in very good technical condition and has been regularly maintained. 1. Last documented backup battery replacement: November 2023 2. Complete robot system with controller and accessories 3. Suitable for integration into automated production lines Typical Applications 1. Machine loading and unloading 2. Injection moulding machine automation 3. Pick-and-place operations 4. Assembly and component handling 5. Gluing and dispensing applications 6. Light-duty welding applications (with suitable equipment) Additional Information The Yaskawa Motoman MH6 is a compact, versatile 6-axis industrial robot designed for precise and reliable automation. Its 6 kg payload capacity makes it suitable for handling small components, machine tending and various industrial automation tasks. Availability: On request Price: On request Further information and photos available upon request.

Condition: excellent (used), functionality: fully functional, overall weight: 15,000 kg, Year of manufacture: 2020 Manufacturer: Sodick Machine model: AG60L Crsdpfx As Ah Rk Esiisi Machine type: Wire EDM machine / Sink EDM Control system / Operation: LN2 CNC control, 15" touchscreen 200 V, 3 phases, 50/60 Hz, 10 kVA Rated current / RMS sym. Amps: 29 A / 50 A Operating hours: 3600 erosion hours