Used Bernardo Kf 20 Super for sale (199)

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 Nwedexabb Hepfx Ahvsc - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW Nwjdpfxsxablxo Ahvjc weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: new, pressure 20,0 t stroke 185 mm table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump Njdpfx Aexaapcjhvowc - Robust construction with welded steel frame

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes Njdpfx Ahjxaac Novowc - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, Bernardo workshop press 20 WK FH Pro Technical specifications Pressure force 20 to Piston stroke 185 mm Table width 170 mm Passage (S) 510 mm Through (F) 130 mm Distance from cylinder - table (F1) 40 mm Distance from cylinder - table (F2) 965 mm Neded Du T Rspfx Ahvjwc Cylinder movable (M) 175 mm Width (A) 730 mm (B) depth 560 mm 1 (C) height 1525 mm Height 1630 mm 2 (D) Weight approx. 112 kg Properties • Fitted with sliding left and right cylinders • To align, presses, bending, assembling gears, disks, etc. • Fitted with foot pedal and hydraulic • hand pump for delivering piston • Standard Edition Prism to shaft alignment • Standard equipment with automatic piston return through integrated return spring • Height-adjustable table with locking bolts • Large dimensioned pressure gauge to read pressure • including two-stage hydraulic pump • Sturdy construction with welded steel frame

Condition: new, Bernardo Bohr - and milling machine KF 60 incl. 3-axis digital display and y-feed Technical specifications Drilling capacity in steel 35 mm Drilling capacity in cast 40 mm Threading up to M 16 Projection 210-550 mm Spindle head pivot range 90 ° Spindle speed (8) 115-1750 U/min ISO 40 spindle adaptor Quill stroke 125 mm Table size 800 x 240 mm T - slot size 16 mm Swivel table 45 ° to + 45 ° Distance from spindle / table 120-375 mm Travel longitudinal (x) 375 mm Stroke transverse (y) 175 mm Travel vertical (z) 255 mm S1 motor power output 100% 0.85 / 1.5 kW motor power input S6 40% 1,1 / 2,2 kW Machine dimensions (W x D x H) 1300 x 1400 x 2100 mm Weight approx. 750 kg package • 3-axis digital display i200 with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system Nsdjd Du Tljpfx Ahvewc • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reducing bushing MK 3/2 • Height-adjustable guard • Automatic platen feed x axis • automatic platen feed in Y-axis

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device Nwjdpfexaazxex Ahvjc - LED digital display - Longitudinal table groove

Condition: used, Year of construction: 2015, Lot consists of: (1) Surface grinding machine Technical Details: Power supply: 400 V; Frequency: 50 Hz; Rated current: 4 A; 1.5 kW; Net weight: 920 kg Nwjdpfx Asylaizjhvoc

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Njdpfx Ajxab Elshvjwc Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min Nwjdpjxaaybefx Ahvjc working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg range L-W-H 3340 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 Nodpfx Aoxabtpjhvswc - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt grinding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New belt dimensions: 150 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 155 mm surface grinding table: 460 x 150 mm suction connection Ø: 100 mm motor output power S1 100%: 2,1 / 2,8 kW motor input power S6 40%: 2,8 / 3,6 kW Voltage: 400 V Nwedpjb Hhh Djfx Ahvsc length: 1080 mm width: 520 mm height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, optimal for grinding stainless steel. - Universally applicable for grinding of edges, surfaces and for cylindrical grinding - Graphite coating on the face grinding surface increases the sliding properties of the grinding belt - Constant belt tension due to spring-loaded tensioning device - User-friendly belt change, fast and uncomplicated - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Universally applicable for craft and industry - Large dimensioned plane grinding surface with protective cover - Including fine adjustment for parallel belt run Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate blanking switch - Base frame Special offer price ex stock Mindelheim, free loading. Art. 05-1249

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 1.6 kW (2.18 HP), total height: 1,250 mm, total length: 1,850 mm, total width: 850 mm, overall weight: 660 kg, working height: 650 mm, For sale is a used, fully functional, fully automatic bandsaw with roller feed, featuring the following technical specifications: - Round cutting area at 90°: 320 mm - Flat cutting area at 90°: 320 x 300 mm - Square cutting area at 90°: 300 x 300 mm - Working height: 650 mm - Infinitely variable cutting speed: 20 - 100 m/min - Saw band dimensions: 3660 x 27 x 0.9 mm - Coolant pump: 120 W - Motor power: 1.5 kW - Machine dimensions (L x W x H): 1850 x 850 x 1250 mm - Weight: approx. 660 kg Operation note: Enter the material length or specify the quantity. Then press Start. The job will be executed automatically with the specified number of pieces. A viewing appointment for the machine can be arranged in advance and demonstrated under power. Nsdpfx Asyfta Hohvjwc The price stated here is net.

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron Nsdpfjvnrm Hox Ahvjwc - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: new, bore capacity in steel (diameter) 32,0 mm arm length 310 - 820 mm workpiece height max. 370 - 870 mm turning speeds 75 - 1220 U/min Nwjdpfx Ahoxabrlevoc spindle taper MT 4 MK base plate 825 x 690 mm threading 24 M quill stroke 250 mm quill feed 0,1/0,16/0,25 mm/U travel x / y 500 / 510 mm total power requirement 2,25 kW weight of the machine ca. 1200 kg. range L-W-H 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, width of the strips 75.0 mm Nwjdjxabtispfx Ahvoc band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, sheet width 1020 mm plate thickness 2,0 mm daylight opening 48 mm bending angle max. 0 - 135 ° work height max. 900 mm total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1350 x 820 x 1140 mm Njdpfoxaaufex Ahvowc Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, bending radius min. 190 mm square edge steel 20 x 20 mm flat steel 100 x 7 mm round bar steel 22,0 mm L-beam 100 x 10 mm range L-W-H 900 x 430 x 310 mm weight of the machine ca. 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop Nwedpfxoxcuyho Ahvsc - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 124 mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1.010 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine Nwodpfxjxaaano Ahvoc - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek Nwodpfxoxaamhs Ahvsc - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Condition: new, turning length 2000 mm centre height 330 mm swing diameter over bed slide 660 mm turning dia. in gap 900 mm swing diameter over slide rest 460 mm spindle bore 105 mm turning speeds 25 - 1600 U/min bed width 400 mm spindle taper 55029 D 1-8 taper in tailstock 5 MK quill travel 235 mm total power requirement 7,5 kW weight of the machine ca. 2900 kg. range L-W-H 3630 x 1200 x 1520 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE Nsdpfxoxabpqs Ahvswc - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery Njdpfx Ahexab Dzjvewc - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: new, 6.0 mm ST 40 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : Nwsdpfx Ahexcuybevjc - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen Nsdoxaarqepfx Ahvewc - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, sheet width 2065 mm plate thickness 1,20 mm daylight opening mit WZ 35,0 mm Njdpfx Ajxabvwjhvewc daylight opening ohne WZ 60,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 520 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm