Used plasma cutting machines for sale (126)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: Chjdezizkyopfx Agrod min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. Chsdpez Sqpiefx Agred If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm Chodpfxeztu Aqj Agrod - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: used, Year of construction: 2013, CNC plasma cutting machine Cjdo Ahx Stspfx Agrohd Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source with automatic gas console and Contour Cut Extraction table 41126ä

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 Chedj Ahqrujpfx Agrod • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder • Plate detection: Ohmic touch sensing • Plate alignment: Manual Additional equipment • Note: Dust extraction unit is excluded

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Chedpfx Agozdz U Uerod Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Chedjy Annbjpfx Agrod Need more information or a formal quote? please send a e-mail or give us a call.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation Cjdozwl Dmopfx Agrehd - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Cedpfxsz H I Auj Agrohd Working area: 3,000 x 13,500 mm 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 31126ä

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software Csdsy Snwnspfx Agrshd - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 Csdpfx Aezc Hn Esgrohd If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Chjdpfx Aez Ixzkjgred

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Chsdjzt Imijpfx Agrjd Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, operating hours: 640 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Donaldson extraction system, 5.5 kW Chedpfxoz Dr Rdo Agrod The machine is being sold due to the purchase of a laser cutting system.

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Chjdpfx Ajz Rivfegrod Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Chjdpfxez Hcr Dj Agrsd Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: used, Year of construction: 1995, functionality: fully functional, USED PLASMA CUTTING TABLE SOITAB 4x2 m, WITH HYPERTHERM MAX 200 GENERATOR, overhauled and with new CNC. Chjdpfezh Dg Ijx Agred MAX THICKNESS 40mm IN STEEL MAX THICKNESS 20mm IN STAINLESS STEEL Comes fully overhauled with new CNC checked and installed by the customer, with a training course included. Time to complete the work: 30/40 days. Turnkey price includes used filter but excludes electrical connections and the smoke duct from the filter to the roof.

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Csdov I U Hcopfx Agrjhd Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table.

Condition: used, Year of construction: 2021, SIDEROS ORION 2 table with scraper, year 2014. Table dimensions: 2600 x 12000 mm. New cutting head. Cjdjzw H Igepfx Agrehd MESSER MULTITHERM 4000 oxy-fuel cutting machine, year 2008. PROFIMEC external filter. TO BE COLLECTED BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Chjdpozy I S Eofx Agred Dimensions & Capability Cutting Area / Table Size: 2,500 mm x 1,200 mm Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: used, Year of construction: 2016, BEVEL head - 5 axes Chodszw Nmxepfx Agrod SIDEROS table with dimensions 4000 x 6000 mm SIDEROS ECO16CT external filter COLLECTION BY SEPTEMBER 2026

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 02206800, overall weight: 13,200 kg, total width: 6,000 mm, total height: 3,000 mm, total length: 26,000 mm, input current: 80 A, Equipment: documentation/manual, VOORTMAN V630M CNC DRILL LINE FULLY FUNCTIONAL, WELL MAINTAINED Chsdpfx Agoz Ha Hfsred -INCLUDING INFEED & OUTFEED ROLLERS -AUTOMATIC TOOL CHANGER -3 SPINDLE DRILLING LINE -INCLUDING FULL SET TOOL HOLDERS -MAX. DRILL SIZE 40MM -30kW SPINDLE MOTOR -MAX. 3000RPM -MAX. PROFILE SIZE 1140X450mm -MIN. PROFILE SIZE 30X10mm -THREAD TAPPING M6-M30 CONTACT FOR PRICE INQUIRY

Condition: ready for operation (used), Year of construction: 2010, operating hours: 10,716 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis ECKERT JANTAR 2 plasma cutting machine was manufactured in 2010. It features a working table dimension of 6,000 × 3,000 mm and a material thickness range of 3–100 mm, depending on the cutting process. The machine is equipped with a Hypertherm HPR130 plasma cutting system, ensuring efficient operation. If you are looking to get high-quality cutting capabilities, consider the ECKERT JANTAR 2 machine we have for sale. Contact us for further details. • Working table dimensions: 6,000 × 3,000 mm • Nominal X/Y working range: approx. 6,000 × 3,000 mm • Material thickness range: 3–100 mm (process-dependent) • CNC control: CNC 859 • Programming formats: ESSI, NCP • Cutting table: Slatted support table with extraction ducting • Plasma cutting system: Hypertherm HPR130 (130XD) • Maximum output current: 130 A • Power supply: 400 V, three-phase, 50/60 Hz • Rated apparent power: 22 kVA • Condition: Good, fully operational • Service history: • February 2026: Fan motor replacement • May 2026: Filter cartridge replacement in the fume extraction unit • June 2026: Gas regulator replacement Additional equipment Chsdpfjz Ng I Nsx Agred • Fume extraction unit: PFC-4 filter and fan unit (motor power 7.5 kW)

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) Cjdpfjy H I Trox Agrohd — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 10,058 h, travel distance X-axis: 6,000 mm, number of axes: 3, Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details. - Voltage (Sp.): 400 V 50/60 Hz- Power Rating: 3 kW- Plasma Power Source Brand: Kjellberg Finsterwalde- Plasma Power Source Model: HiFocus 160i PLUS- Plasma Power Source Serial / Art. No.: Art.-Nr. 11.033.702 / 07057- Plasma Power Source Specifications: - Open Circuit Voltage (U0): 330 V - Mains Voltage (U1): 400 V (3~ 50 Hz) - Max Current (I1max): 47 A - Effective Current (I1eff): 47 A - Power / Pressure: P1/min = 0.7 kW, Pmax = 0.5 MPa - Cutting Current Range: 10A / 84V - 160A / 144V - Duty Cycle: 100% at 160A / 144V; 100% at 25A / 90V - Power Source Mass: 196 kg - Protection / Insulation Class: IP 22, . F - Cooling Type: AF- Gas Console / Control Units: Kjellberg PGC and PGV 1- Torch Systems / Cutting Heads: - 1x Plasma Cutting Head - 1x Oxy-fuel / Flame Cutting Head- Control Console: Integrated CNC operator terminal with keypad and display- Filtration / Dust Extraction System: Donaldson Torit DCE Cedpfx Agozzav Eorehd