Used gantry milling machines for sale (152)

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia Codpfou I E Emsx Agrshd max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Csdpfxeymxi Ao Agrjhd Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 Chsdpfxsytrxks Agred - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) Cjdpfx Agszu Nz Dorehd MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: used, Year of construction: 2018, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Chodpfxehx R Dvs Agrjd Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. Chjdpex Uwnbofx Agrjd TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS CNC control: Siemens 840D SL Axes: 5 controlled Total power requirement: 70 kVA Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data Csdoi Hb I Topfx Agrjhd · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain TNC 530, TECHNICAL DETAILS Work Area Table surface: 2,300 x 1,600 mm T-slots: 22 mm Distance between T-slots: 200 mm Workpiece weight with optimal distribution: max. 6,000 kg/m² Distance between columns: 2,700 mm Distance between table surface and spindle center: max. 1,220 mm Travel / Axes Travel X-axis: 2,200 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,000 mm Feed rate X/Y-axis: 0 - 60 m/min Feed rate Z-axis: 0 - 40 m/min C-axis rotation: ± 370° A-axis rotation: ± 105° A-axis torque: max. 830 N·m C-axis torque: max. 1,200 N·m Milling Head / Spindle Milling head: TOE 29 T, 5-axis orthogonal milling head Spindle connection: HSK 63 A Spindle power: 29 / 37 kW Spindle torque: 92 / 115 Nm Spindle speed: max. 20,000 rpm Constant torque range: 0 - 3,000 rpm Tool Changer Tool changer: Automatic tool changer Tool holder: HSK 63 A-100 Magazine capacity: 42 stations Tool diameter: max. 80 mm Tool length: max. 350 mm Tool weight: max. 8 kg MACHINE DETAILS Control model: Heidenhain TNC 530 Cooling / Measuring Systems Tool coolant supply through the spindle: 20 bar Coolant flow rate: 25 l/min Measuring system X/Y/Z-axis: Heidenhain glass scales Measuring system C-axis: Heidenhain angle measuring system EQUIPMENT Chedpozhnk Dofx Agrsd Heidenhain TNC 530 CNC control 5-axis orthogonal milling head TOE 29 T Electro spindle HSK 63 A Automatic tool changer with 42 stations Tool coolant supply through the spindle Laser tool presetting BLUM Heidenhain glass scales on X, Y and Z axes Heidenhain angle measuring system on the C-axis Thermal insulation and stabilization of the crossbeam Central lubrication 2 chip conveyors Portable handwheel Heidenhain HR 520 15" TFT color monitor with soft keys Full enclosure with CE safety standard Control cabinet with air conditioning Rinsing gun Sliding roof for loading and unloading Note: The operating hours can be found in the last picture.

Condition: refurbished (used), I.M.M.U. BONARDI PLANO MILLING MACHINE - DISTANCE BETWEEN COLUMNS 1220mm - LENGHT 4000mm - HEIGHT 950mm Cjdpfxod Avz Ie Agrjhd

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 Chedpowa Dx Rjfx Agrsd - coolant unit - chip conveyor - technical documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, controller model: Siemens SINUMERIK 840D, TECHNICAL DETAILS Travel in X-axis: 5,000 mm Travel in Y-axis: 3,000 mm Travel in Z-axis: 1,500 mm Max. workpiece dimensions (L × W × H): 4,000 × 2,000 × 1,000 mm Table length: 4,050 mm Table width: 2,050 mm Table height: 500 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Rapid traverse rate X-axis: 65 m/min Rapid traverse rate Y-axis: 65 m/min Rapid traverse rate Z-axis: 65 m/min Position of milling head: vertical Tool interface: HSK 63A Spindle speed: 22,000 rpm Spindle power: 30 kW Torque: 28.6 Nm Tilting axis A: ±110° Rotational range C-axis: ±182.5° Cjdpfozyl Azsx Agrshd Magazine capacity: 20 stations Max. tool diameter: 100 mm Max. tool weight: 6 kg MACHINE DETAILS Control system: Siemens SINUMERIK 840D Connected power: 150 kW Dimensions & Weight Dimensions (L x W x H): 8,000 x 7,500 x 6,200 mm Dimensions of control cabinet (L x W x H): 600 x 4,200 x 2,600 mm Machine weight: approx. 78,000 kg Operating hours: 71,080 h EQUIPMENT Dust extraction hood on the milling head for connection to an on-site dust extraction system NC4 laser system for contactless tool measurement and tool breakage monitoring Renishaw RMP60 wireless probe for workpiece measurement Bellows/roller covers

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Csdpfeywgyrsx Agrshd Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Chjdpfxszcqnco Agred Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Codpfsyv A Dkox Agrehd Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, The STARVISION DH 2012 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, mechanical engineering, and contract manufacturing. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 control ✔ HEIDENHAIN TFT screen 19" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (IKZ) 70 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, closed at the top Accuracy: Chsdpfx Agsq Ixc Terod Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: refurbished (used), PORTAL PLANNING MACHINE TOS Chedpefmn Txefx Agrsd LENGTH 3000mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm MACHINE DETAILS Csdpfx Asy R Dn Hjgrjhd Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Cjdpfsxvx U Asx Agrohd Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. Chedpfe Sd U Dox Agrod As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Chodpjvy Dugsfx Agrod Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Csdpfx Agoy Sxkrorjhd Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3.6002, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, table load: 12,000 kg, TECHNICAL DETAILS X axis: 4,000 mm Y axis: 3,000 mm Z axis: 1,500 mm Passage height: 1,550 mm Chjdpjxvrb Nefx Agrod Passage width: 2,500 mm Table width: 2,000 mm Table length: 3,000 mm max. table load: 12,000 kg Tool holder: HSK-A100 max. tool weight: 30 kg max. tool diameter: 250 mm max. tool length: 500 mm Drilling spindle speed range: 5–6,000 rpm max. permissible torque at milling spindle: 800 Nm MACHINE DETAILS Total power requirement: 30 kW Space requirement approx.: 9.5 x 6.7 x 6.2 m EQUIPMENT Demmeler pallet changer

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. Cedebnpgxspfx Agrohd The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The STARVISION DX 3220 impresses with its robust portal design, powerful drives, and high-quality components. It offers high precision, rigidity, and reliable machining – even for demanding machining tasks. Ideally suited for mold making, machine construction, and contract manufacturing. Chodpfx Agshy Avpored Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer: 60-position chain magazine with double gripper Chip conveyor systems: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Rotary table: Preparation for 4th axis Enclosure: Full enclosure, closed on top (including roof) Accuracy: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Contact us – we will be happy to advise you and create a customized offer.

Condition: new, travel distance X-axis: 6,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 15,000 m/min, table length: 6,000 mm, table width: 2,400 mm, spindle speed (max.): 6,000 rpm, table load: 19,000 kg, position of the milling head: vertikal, torque: 1,350 Nm, spindle nose: SK 50, spindle motor power: 53 W, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The STARVISION FG 6226 is a powerful and highly precise gantry milling machine for machining large and heavy workpieces. Thanks to its robust gantry design, powerful drives, and high-quality components, the machine is ideally suited for mold and tool making, mechanical engineering, contract manufacturing, and demanding machining tasks with high requirements for stability, performance, and accuracy. Its advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical equipment: Control system: • HEIDENHAIN TNC 7 • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel Coolant supply: • Internal coolant supply (ICS) 70 bar Tool changer: Csdpfx Agohy Avterjhd • 60-position chain magazine • Tool change via dual gripper Chip removal: • Hinge belt chip conveyor, transverse • Double screw conveyor, longitudinal Preparation: • Preparation for a 4th axis / NC rotary table Machine enclosure: • Full enclosure, closed at the top Accuracy: • Positioning accuracy: ± 0.035 mm • Repeatability: ± 0.028 mm Contact us – we will be happy to advise you and prepare an individual offer for you.