Used gantry milling machines for sale (153)

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical Specification Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Thrust force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with spindle SK50 Available power: 30 kW Bjdpfstix S Nsx Aknelp Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system - 1 pallet shuttle with 2 storage stations - 1 manual pallet transfer system between machine and shuttle - 2 workpiece carrier pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Pitch between chain pockets: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - ICS / coolant through spindle center, 3,000 l tank, Capacity: 30 l/min, pressure: 7 bar at the tool 2 x chip conveyors Portal enclosure Touch probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation: 2 copies (German / French) CE marking Very well maintained, continuously serviced condition!

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm Bodeyhph Ejpfx Aknelp ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Gantry Portal Milling Machine / Manufacturer: WALDRICH SIEGEN Type: PF-S-150 - 1953: Original year of manufacture (originally a workbench) - 1974: Reconstruction by the manufacturer WALDRICH SIEGEN to a portal milling machine (completely new milling support) - 2001: Modernised to CNC, with new electrical control cabinet - 2015: Modernization / Reconstruction to NC table drive - 2024: Reconstruction to crossbeam drive (gantry) Machining options: - Milling/Boring: horizontal/vertical The machine can be inspected by appointment under power. Condition: Ready for operation. TECHNICAL DATA / DESCRIPTION: Travel distances of feed axes (CNC): - Table: 14.000 mm - Crossbeam support: 4.500 mm - Crossbeam: 4.000 mm Bodoyz Ru Uepfx Aknolp - Stand passage: width 4.545 mm - Clear width: 4.200 mm - Height from table to spindle: 4.000 mm - Quill: 450 mm - Table size / clamping: 14.000 x 4.350 mm - Table load: max. 200 tons (10 tons point load) - Drive power of main spindle motor: 125 kW - Total machine weight: approx. 350 tons - Space requirement for entire machine: Length 40 / Width 10 / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Additional comprehensive equipment ... No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min Bodpozwg Nkefx Aknjlp creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m The machine is equipped with angle milling heads for large engine machining. + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL Bodpfx Ajyq Sxlsknslp spindle diameter 200 mm Spindle capacity 85 Kw surface area 9000x2800 mm Table load 40000 kg column daylight 3400 mm high speed spindle taper ISO 50 weight of the machine ca. 193,8 t dimensions of the machine ca. 22,4x10,2x8,2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed ??12-450 rpm Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x 550 mm extension for WFKs The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Control system: Siemens 840-D Bljdpezv Hxcofx Aknjp X-axis travel: 2000 mm Y-axis travel: 2000 mm Z-axis travel: 500 mm Distance between columns: 2700 mm Max. working height: 1100 mm Table: 2250 x 2000 mm Workpiece weight: 10 tonnes Spindle power: 24 kW Spindle speed: 2250 rpm Tool holder: SK 50

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 5,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis MECOF DYNAMILL 3000L was manufactured in 1999. It features an impressive X-axis travel of 5,500 mm, Y-axis travel of 3,000 mm, and Z-axis travel of 1,500 mm. The machine is equipped with a powerful spindle taper of ISO 50 and a tool magazine capacity of 24 tools. If you are looking to get high-quality milling capabilities, consider the MECOF DYNAMILL 3000L gantry milling machine we have for sale. Contact us for further details. • Orthogonal head: 10–3,000 rpm speed range; 22 kW power; automatic tool clamping (20,000 N clamping force) • PDFTwin 15 head (GAMFIOR electrospindle): 600–24,000 rpm speed range; 17.5 kW motor power; E18 electrospindle • Indexed positioning platform: 360 positions; ±180° rotation range; ±0.02/300 mm positioning accuracy; 45,000 Nm axial clamping force • PDFContinuous positioning platform: 360,000 positions; ±185° C-axis rotation range; 0–2,400°/min C-axis rotation speed; 2,000 Nm clamping torque Additional equipment • Tool profile measurement device • Cart-type head magazine • BLUM radio-transmitted laser probe • Air/oil tool cooling system • MECOF High-Speed Milling system Technical Specification Taper Size ISO 50 Bsdpfoznv Tgex Aknjlp

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank Bledpfoxa Hl Rox Aknjp - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: like new (used), Year of construction: 2004, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fence.Automatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Blodpsyf Rq Nsfx Aknep

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm Blsdpfx Asvwgmmjknop weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach Bledpfx Aevwglvsknsp weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix Bjdsvwgm Hspfx Aknjlp - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bedpfeztxgmex Aknslp Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Measuring probe Tool holders (as shown in the picture)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table length: 2,000 mm, table width: 1,300 mm, spindle speed (max.): 10,000 rpm, overall weight: 21,500 kg, tool weight: 18,000 g, spindle motor power: 22,000 W, number of axes: 3, This 3-axis PORTIC VTEC gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 2,000 x 1,300 mm and a maximum workpiece weight capacity of 8,000 kg. If you are looking to get high-quality milling capabilities, consider the PORTIC VTEC gantry milling machine we have for sale. Contact us for further details. • Max. workpiece weight: 8,000 kg • Distance between columns: 1,700 mm • Spindle nose to table: 205 – 1,225 mm • Spindle speed: 4,000 / 6,000 rpm (gear type) or 8,000 / 10,000 rpm (belt type) • Spindle power: 18.5 / 22 kW (optional 22 / 26 kW or 30 / 37 kW) • Rapid traverse (X/Y/Z): 15 m/min • Cutting feed rate: 7 m/min Bodpjy Tv Udofx Aknslp • Guideway type: Rigid box ways on all 3 axes • ATC capacity: 32 stations (standard) • Tool change time (tool-to-tool): 3 s • Max. tool length: 380 mm • Power supply: 380 V ±10%, 3-phase, 50 Hz • Power capacity: 55 kVA • Hydraulic pressure: 75 kg/cm² • Air pressure: 6 kg/cm²

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Bjdpsuni D Eofx Aknelp

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head Bedpfxsdkmihs Aknslp ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 10,000 rpm, overall weight: 26,000 kg, tool weight: 15,000 g, spindle motor power: 30,000 W, controller manufacturer: FANUC, controller model: Series 18i-MB, number of axes: 4, This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details. • Condition: Refurbished (used) • Functionality: Limited functionality • Power: 30 kW (40.79 HP); electrospindle after full regeneration (new bearings and clamping system) Blsdpfoyw Nppjx Aknsp • Working area: 4000 x 2000 mm • Rapid traverse X/Y/Z: 20 / 20 / 15 m/min • Rotational speed (max): 300 rpm • Tool magazine: 36 positions (damaged – no changer arm) • Distance table to spindle center: 150 mm • Mount diameter: 50 mm Technical Specification Taper Size SK 50

Condition: good (used), CHARACTERISTICS Table; 4000 X 1250 X axis travel; 3500 mm Y axis travel; 2500 mm Z-axis travel; 800 mm Distance between columns; 2300 mm Spindle RPM; 5,000 rpm Control; FIDIA Bodsr I Ax Rjpfx Aknolp Electronic handwheel Universal head Tool; BT 50 Motor power; 30 Kw Feed rate; 5000 mm / min Rapid traverse; 15.000 /12.000mm / min Permissible weight on the table; 10.000 kg Machine dimensions (width x length x height); 4262 x 10748 x 4400 Weight; 25.500 kg

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Blsdpox D S Eksfx Aknjp Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 Bsdpfx Akju I E Emjnslp daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 workpiece height 708 mm Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Bedoyqvdrepfx Aknolp apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50977, travel distance X-axis: 5,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 9,600 mm, total width: 6,500 mm, spindle speed (max.): 16,000 rpm, total height: 5,600 mm, table load: 20,000 kg, torque: 160 Nm, rotational speed (max.): 16,000 rpm, overall weight: 63,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for efficient 5-sided machining of workpieces made of synthetic and composite materials, model-building block material, and aluminum, as well as for HSC machining of cast and steel materials. Travel ranges: X = 5,500 mm x Y = 3,500 mm x Z = 1,500 mm Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK100A, 60 kW, 16,000 rpm, 160 Nm CNC control HEIDENHAIN TNC 7 80-position tool changer, chain magazine KSS and MMS Laser tool measuring system Wireless measuring probe RMP60 Bellows cover Equipment and further options available upon request. Bodpfx Aksz I Rlzjnjlp Available from August 2027!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50940, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 4,500 mm, table length: 3,500 mm, total width: 6,500 mm, spindle speed (max.): 24,000 rpm, total height: 5,600 mm, table height: 300 mm, rotational speed (max.): 24,000 rpm, overall weight: 34,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for the efficient 5-sided machining of workpieces made of plastics and composite materials, model-making block materials and aluminum, as well as for HSC machining of cast and steel materials. Travel ranges: X = 2,200 mm x Y = 3,500 mm x Z = 1,500 mm Bodpfx Akez I Rfbenelp Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK63A, 60 kW, 24,000 rpm, 60 Nm CNC control HEIDENHAIN TNC 7 68-position tool changer, chain magazine Coolant system and mist extraction system Laser tool measurement system Wireless measuring probe RMP60 Bellows cover Equipment and additional options available upon request. Available from August 2027!

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min Bledpovwgmgofx Aknop column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, Year of construction: 1971, x-travel 13000 mm y-travel 2750 mm z-travel 3000 mm turning speeds 600 U/min spindle taper ISO 50 milling head 4 No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Blodpfx Aoyqvl Asknjp please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team