Used other wood milling machines for sale (48)

Condition: used, PEULEN under-table milling machine, spindle adjustable up and down manually, spindle shaft diameter 30mm, table size 130cm, adjustable fence with AIGNER guide, 5 spindle speeds, 5.5KW motor, spindle lock, Lhsdpfjzcnp Dox Aftei brake, Good condition, machine inspected and fully ready for operation.

Year of construction: 2019, condition: new, GOMA GS-900 Router Lhedpfxofbl Epo Aftsi Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: used, Number of boring spindles 1 St. Lhjdpfxjw Db H Ts Aftoi Motor output 1 kW turning speeds 33.000 U/min Hoffmann UAD 33-F dovetail milling motor.

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling - Overhead control panel - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 Lhsdpfxoy Nncfo Aftei The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Reference: R-S1632

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Lhedpfxey Iyvno Aftji Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Ljdpfjy Iwf Hox Aftehi Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: excellent (used), Motor: 4.7/5.7 kW Spindle: 30 mm Table length: 100 cm Ledpoy S S H Hsfx Aftshi

Year of construction: 1977, condition: good (used), swivel head, top-down adjustment of the table top, Lhedjicld Topfx Aftsi two types of speeds: 18,000 and 24,000, overall dimensions: height 1570mm, width 1170mm, length 1150mm,

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed, 30 mm spindle, 50 mm milling width, machine size: 1000 x 1000 x 1300 mm, weight 250 kg, good condition, fully functional. Shipping available at additional cost! Due to the age of the used machine, warranty is excluded when sold to commercial customers. Lhjdovkgdrepfx Aftji

Year of construction: 2026, condition: new, WOODGRAIN STUMP GRINDER – POWER AND PRECISION FOR YOUR GARDEN 420 cm³ Engine | 9 kW (12.24 HP) Power | 300 mm Cutting Disc | Tungsten Carbide Teeth Looking for a reliable machine that will permanently eliminate troublesome tree stumps after tree removal? The Woodgrain is a professional petrol-powered stump grinder designed for efficiency, durability, and operator comfort. Thanks to its compact design with a width of only 75–80 cm, the machine can easily access areas unreachable for heavy forestry equipment. KEY FEATURES OF THE FP15 STUMP GRINDER POWERFUL PETROL ENGINE: The heart of the machine is a proven 4-stroke engine with a displacement of 420 cm³ and power output of 9 kW. This ensures stable operation even when grinding hard wood. HIGH-PERFORMANCE CUTTING SYSTEM: A 90 mm thick and 300 mm diameter cutting disc equipped with tungsten carbide teeth (TCT). These teeth are extremely hard and highly resistant to wear and dulling. LARGE WORKING RANGE: The machine allows stump grinding deep below ground level (up to approx. 225 mm) and high above ground level (up to 515 mm), enabling complete removal of tree remains. Lhedpfjy Sggnox Aftoi MOBILITY AND STABILITY: Large 13" pneumatic wheels make transportation over uneven terrain easy, while the drum brake allows one wheel to be locked, creating a pivot point for smooth side-to-side grinding motion. TECHNICAL SPECIFICATIONS Specification Value Brand Woodgrain Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW / 12.24 HP Starting System Manual recoil start Fuel Tank Capacity 6.5 l (unleaded petrol) Oil Capacity 1.1 l Cutting Disc Diameter 300 mm Grinding Disc Thickness 90 mm Number of Cutting Teeth 9 pcs (tungsten carbide) Grinding Depth (below ground) up to 225 mm Grinding Height (above ground) up to 515 mm Machine Weight approx. 110 kg SAFETY AND COMFORT Emergency Safety Switch: Positioned within easy reach of the operator for immediate machine shutdown in emergency situations. Adjustable Handle: Allows the handle height to be adjusted according to the operator’s height and working depth, significantly reducing strain on the back. Robust Construction: The metal housing protects the engine and components from mechanical damage and flying wood debris. PACKAGE CONTENTS Woodgrain stump grinder Complete set of cutting teeth (pre-installed) Service tool kit User manual

Condition: new, Year of construction: 2024, Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Lhodpfx Aoq Ivmuoftoi Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), IM Very good condition. Lodpjv Air Aefx Aftohi

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Lsdpfxoyy Np Io Aftshi

Condition: excellent (used), functionality: fully functional, AUTOMATIC TENONER machine model BALESTRINI 2/TAO AUTOMATIC MORTISER machine model BALESTRINI 2/CAP videos of machines in working are available second hand machines in Excellent working condition for production of parts of chairs , sofa' , bedroomes , furnitures , etc . with tools : Yes Lsdpfx Aedwqi Ssftohi volt. 380/50

Condition: used, functionality: fully functional, Wema Probst QF50 Cross-Mill Machine Cross-Mill machine for processing round timber with a swivel table for adjusting the milling angle. 2 machining stations 1 cross-milling unit 1 drilling unit Lodpswc Tdnsfx Aftehi

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system Ledpfxjxy Ntqs Aftehi - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: excellent (used), Horizontal milling machine Spindle diameter: 40 mm Spindle length: 220 mm Lhjdpfew N Ryrjx Aftji Maximum spindle diameter: 250 mm

Condition: excellent (used), Main motor power: 3.4 / 4.5 kW Feed power (3 rollers): 0.7 kW Spindle diameter: 30 mm Lhedpeg Etw Isfx Aftji The trolley’s reach is 170 cm. In very good condition.

Condition: excellent (used), Spindle 30 mm, Table width 100 cm, 3-roller feed, Side tables length 110 cm x2 Lsdpoygxcijfx Aftjhi

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit Lhsdpfeyfua Ujx Aftji

Year of construction: 2018, condition: excellent (used), DOUBLE-SIDE MILLING MACHINE RMD 6030M MINIMUM LENGTH OF WORKING MATERIAL 250MM MAXIMUM LENGTH OF WORKING MATERIAL 3000MM minimum thickness - 5mm maximum thickness - 85mm tools: - scoring tool can be set vertically, horizontally and at an angle, outer diameter 160-180 mm, opening 25.4-40mm (with a washer) - cutter - the cutter can be moved up and down. left and right and angled. Lhodpfx Aoiu Ia Neftei the machine includes a receiving table, a feeding table (separate photo) If you have any questions, please contact me. The machine is practically unused

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Lhjdpfxjurwy Nj Aftji

Condition: used, Milling machine for wood products, Landonio brand, model FMU 2000 Lsdpfx Asizlirjftohi