AUTOMATIC TENONER and MORTISER BALESTRIN

BALESTRINI 2/TAO + 2/CAP

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: Rbsdpfxew I Uxcs Ab Iow - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Rbodpfxodnxyde Ab Iow Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: new, Year of construction: 2010, functionality: fully functional, Equipment: CE marking, double-sided, Linija za duzinsko spajanje sa dva frezera.Presa duzine 6000 mm. Masina je nova i nikada nije koriscena.Uz masinu idu svi pripadajuci alati. Rodpfx Aewptnmsb Iebw

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Redpowt Snysfx Ab Iebw

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Rbsdpfx Aou Rqq Hob Isw Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right Rbedpfxsfg Rlce Ab Ijw steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH Rbsdpfx Aethk T Isb Iew

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment Rbedpfx Aberigxyo Ijw WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ESS B2 - *M 0--.10*, Mobile starscreen on trolley Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 2700 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Delivery time after order approx. 14 weeks Rbjdpfx Abjirnrpe Iew

Year of construction: 2026, condition: new, Fully automatic horizontal stretchfilmwraping machine SPINNER 1800s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 3kW - Max. ring rotation speed: 40 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1600 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. Technical features: Product to Wrap Sizes Rodpfx Abefzrhds Iebw - Max. length: Unlimited - Min. length (WxHxL): 600x 450x 1200 mm Conveyor belt’s features: - Useful length: 2300mm - Total length: 2450mm - Working height: 950 mm - Electric motor power: 0,55 kW - Max. speed: 10m/sec. - Max. load capacity 100 kg/m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron