Used Martin Transline 1228 for sale (94)

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Csdpfx Aozyy Daslbsrg Equipment and technical specifications:

Condition: excellent (used), Catalog number: 8057 TECHNICAL DATA - max. blade diameter: 400mm - blade arbor diameter: 30mm - max. cutting height: 120mm - spindle lock - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on carriage: 1000mm - cutting width with guide: 1050mm - main motor: 3kW - with extension - dimensions of the table with extension: 1050x1730mm - 3 types of rotational speeds - dimensions (L/W/H): 2700x1750x1000mm - weight: 860kg Crodpfx Aozx Sg Rslbjg ADVANTAGES – Made in Germany – Blade guard – Large blade: 400mm – Used saw, very good condition Net price: 7900 PLN Net price: 1881 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1978, Sliding carriage: 2500 mm Codpfxszxq U Te Alberg Cutting width: 1500 mm Scoring cutter, miter stop Location: Nattheim

Condition: used, Used Machine Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism Csdpfxezlbqxe Albjrg - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: good (used), Year of construction: 2000, Panel saw with scoring unit 3 m sliding table Length adjustment via display Width adjustment by hand Cjdpfstw Hd Aex Alborg Height adjustment converted to foot-operated hydraulic system with clamping bar for veneer or other materials

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Credpfezbm Tfsx Albeg Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Martin T 65 panel saw Heavy-duty precision panel saw 3.5” LCD color display Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Credpfxozkhk Ao Albsg Parallelogram crosscut table for tilting up to 46° on both sides, LCD display, 0.01° fine adjustment for cutting angle Analog length stop with 2-point system Rip fence length: 3,000 mm Cutting width with parallel fence: 1,100 mm Fence adjustment via handwheel Fence position readout via control panel CE version Year of manufacture: 2012 Machine is WORKSHOP-TESTED and in TOP condition, from a craft business available ex works

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm Crodpfxjzc I Tpe Albeg - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 1984, planing width: 630 mm, number of blades: 4, Martin T 42 Thickness Planer Working width 630 mm 380 V Credpfx Alozx Tigebsg Year of manufacture 1984 Max. 5000 rpm

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: Crsdpfx Aexzfqbjlbsg • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Crsdpfjpq If Djx Albjg Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Csdpsqlclbefx Alberg Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm Crodpsv Erkaefx Albog T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Cjdpfxsw D T Dko Albjrg Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Credpfx Asqlck Nelbjg Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm Codpfepgkmwjx Alborg cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Crsdor Hr D Nspfx Albeg Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm Csdpfx Asqlckpolbsrg - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Credpfeyi A Tdox Albsg Storage location: Nattheim

Condition: used, Year of construction: 1984, Design: swivelable Swivel angle forward: +45° Swivel angle backward: -5° Table length: 2200 mm Table width: 1100 mm Extendable frame support: Yes Selection of speeds: Belt change + pole change Taper of the milling spindle: MK 5 Diameter of the milling arbor: 30 Material of the stand: Steel Control panel position: below Height adjustment of the spindle: electric Swivel adjustment of the spindle: electric Spindle locking: manual Spindle brakes: electric Crsdpfx Aszu Rkyslbsg Dust extraction diameter of the milling fence: 120 mm Spindle rotation direction: Left/right Motor power: kW Electric axes: Swivel / Raise / Lower adjustment Closing of the table opening: Insert segment Design of the fence jaws: Aigner fence system Fence adjustment: manual Milling fence adjustment: Manual Feed device: yes, 4 rollers Weight approx.: 1200 kg Dimensions: 2200 x 1500 x 1600 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Codpfx Aozwp Uislbsrg Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Credpfxozwpvao Albjg Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: used, Year of construction: 1989, Circular saw Manufacturer: Martin Type: T 72 Credpezuyx Tjfx Albsg Year of manufacture: 1989 Technical data Saw blade min. 200 mm Saw blade max. 450 mm Rotational speed 2800/4000/5500 RPM Voltage 380 V 50 Hz Rated current 18.0 A Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), 2 blades Working width: 62 cm Working height: 20 cm Cjdpozvnzrofx Albsrg 5.5 kW motor

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. Cjdpfx Alezvfm Ejbsrg • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.