Used other horizontal machining centers for sale (57)

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: SIEMENS, controller model: 840D sl, number of axes: 4, This 4-axis HELLER MC 20 was manufactured in 2019. It features a Siemens 840D sl control system, with X, Y, Z travels of 800 mm, 750 mm, and 800 mm respectively. The spindle supports a speed range of 5-16,000 rpm with a drive power of 34 kW. It includes a 44-position tool magazine and a rotary table diameter of 520 mm. Consider the opportunity to buy this HELLER MC 20 horizontal machining centre. Contact us for more information. • Working area: • Feed forces (X/Y/Z): 10,000 N • Speeds and dynamics: • Rapid traverse X/Y/Z: 60,000 mm/min • Acceleration: X = 7 m/s², Y = 8 m/s², Z = 6 m/s² • Spindle / machining unit (HSK-A63): • Tool interface: HSK-A63 • Spindle diameter in front bearing: 70 mm • Tool management: • Tool magazine type: HSK-A63 • Number of tool positions: 44 • Max tool weight with all pockets occupied: 6 kg • Max tool length: 550 mm • Max tool diameter: • With all pockets occupied: 120 / 80 / 80 mm • With adjacent pockets free: 150 mm • Minimum chip-to-chip time (VDI): approx. 3.3–4.4 s • Rotary axis: • A-axis with rotary table diameter: 520 mm • Interference circle diameter (A-axis): 1260 mm • A-axis speed: 17 rpm • Indexing resolution: 360,000 × 0.001° • Indexing accuracy (VDI/DGQ 3441): 12 arc sec • Measuring system: Direct, absolute linear scales • Utilities: • Power supply: 400 V / 50 Hz • Total connected load: approx. 27–30 kVA • Compressed air requirement: 4.5–6 bar • Condition and documentation: • Machine is in very good technical condition • Complete service documentation available Gbjdoyf Nntspfx Af Uji Additional equipment • Dedicated loading and unloading system

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring Gbodpfjx D Iw Njx Af Usi • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: MAKINO, controller model: Pro5, table load: 1,200 kg, tool weight: 20,000 g, number of axes: 4, This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Additional equipment • Spindle cooling • Tank system with Knoll compact band filter, 3200 liters • Coolant supply through the spindle • Oil mist extraction • Scraper belt conveyor • Conversion kit for stand-alone operation (currently used as a system machine) Machine Benefits Technical Machine Benefits • Transverse movement (x-axis) of the column: 900 mm • Height adjustment (y-axis) of the spindle unit: 800 mm • Longitudinal movement (z-axis) of the table: 1020 mm Gsdpfx Afex D Ngxs Uobi • Permissible swivel diameter in the working area: 1000 mm • Max. Swiveling height from pallet surface: 1300 mm • Pallet size: 630 x 630 mm • Pallet – nc – rotary table with 4th nc axis • Input resolution: 0. 001° • Positioning accuracy: ± 3 arcseconds • Tool magazine with 242 storage slots Extra Information Power Supply 400 V, 3-phase AC, 50 Hz Power rating: 72 kVA Control System Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection Adaptive feed control Compressed air through the spindle Knoll compact band filter, 3200 liters Magnetic separator Double-switching filter for IKZ Coolant supply through the spindle Compressed air through the spindle Oil mist extraction Scraper belt conveyor Control System: Makino Pro5 Options for 48 zero points and Custom Macro B Tool life monitoring Tool breakage detection (parallel to main operation) Adaptive feed control Conversion Kit for Stand-Alone Operation (Currently used as a system machine (FFS/FMS)) Pallet changer with placement of 2 pallets in alternating cycles onto a station positioned outside the working area Pallet holder rotatable, indexed at 90° intervals, 0-position electronically monitored Coding for automatic program call when inserting the pallet Pallet storage station secured with a protective device and electrical interlock

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Gjdex D Skmjpfx Af Ujbi Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless Gjdeyf E R Depfx Af Uobi • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Gbjdpfsx D I Alex Af Uoi

Condition: ready for operation (used), Year of construction: 1999, overall weight: 70 kg, number of axes: 5, This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machine's power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information. • Voltage: 3PE ~ 400 V • Frequency: 50 Hz • Current: 22 A Gsdpfsyblnuox Af Uebi • Power: 15 kVA • Control voltage: 24 V

Condition: ready for operation (used), Year of construction: 2009, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2009. A horizontal machining centre with a voltage of 400 V, frequency of 50 Hz, and a rated current of 123 A. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. Godpfxsx D Rh De Af Uobi • Voltage: 400 V • Frequency: 50 Hz • Rated current: 123 A

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Additional equipment • Pallet changer: RS4 Gedpfxex D Hl Ee Af Ujbi • Tool magazine: Omron Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 16,000 rpm, This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Godpfxsx D Iz Ue Af Uobi

Condition: used, Year of construction: 1993, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,330 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, total height: 5,800 mm, total length: 14,000 mm, total width: 4,000 mm, table width: 2,000 mm, table height: 250 mm, table length: 2,000 mm, table load: 20,000 kg, rotational speed (min.): 5 rpm, rotational speed (max.): 300 rpm, overall weight: 40,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, spindle motor power: 36,000 W, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The Lazzati HB130 is a heavy-duty CNC horizontal boring and milling machine from the Italian manufacturer Lazzati. Machines of this series are primarily used in large-scale machinery construction, turbine production, energy plant engineering, as well as in tool and mold making. This machine is designed for machining large and heavy workpieces, allowing for precise drilling, milling, and tapping operations on massive steel or cast components. It features a particularly robust construction with hydrostatic guides, ensuring high rigidity and accuracy during heavy-duty machining tasks. Gbedpfx Afoytrm Ij Uei Spindle taper DIN69871 ISO 50 Milling spindle taper ISO 60 The listed price is exclusive of dismantling, packaging, and shipping. Sale ex location; subject to prior sale. Machines are sold as used; any warranty or guarantee is excluded.

Condition: ready for operation (used), nominal power (apparent): 45 kVA, controller manufacturer: Fanuc Series 18i-MB, total length: 11,000 mm, total width: 6,000 mm, empty load weight: 24,000 kg, Type: MCH-800 Gbsdpfjv Sfqgox Af Uei Distance of spindle end to table center: 300 1300 mm Distance of spindle center to table surface: 50 1050 mm Max workpiece dimensions: 1400 x 1200 mm cooling through spindle X-axes: 1350 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: (5x) 800 x 800 mm (continuous indexing) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Toolstore: yes Tools: 90 positions Frequency: 1 > 6000 rpm (option!!)

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Gbjdjwttrmjpfx Af Usi Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes

Condition: used, Year of construction: 1998, operating hours: 95,000 h, machine/vehicle number: KMH 014110, Technical Data CNC control: FANUC 16iM - 16i Operating hours: 95,000 h Travel (X × Y × Z): approx. 500 × 380 × 300 mm Table size: 650 × 380 mm Spindle taper: ISO/BT 30 Spindle power: approx. 5.5 kW Spindle speed: up to 8,000 rpm Rapid traverse: approx. 48 m/min Tool magazine: approx. 14 positions (ISO30 - BT30) Chip and coolant tank with pump Integrated fluid lubrication system The machine can be inspected under power by prior appointment. Gsdpfoyn Nv Njx Af Uobi Technical data and specifications are subject to change and correction. Prior sale reserved!

Condition: used, Year of construction: 2022, operating hours: 12,787 h, machine/vehicle number: M210019, comprising: FP 600 Duo complete, complete laser station, SIC MARKING, type XXL-BOX 1200, year of manufacture 2021, washing machine, filter system for the washing machine, oil separator, ultrasonic cleaning, 1 robot of type IRB 4600, version IRB 4600-40/2.55, IRC5 Single Gsdoyn Nkgspfx Af Uebi

Condition: used, Year of construction: 2002, machine/vehicle number: 88821-5, Travel paths (X/Y): 600x450 mm, 90-position tool changer HSK-E40, 42-position electrode holder changer EROWA ITS, 7-position pallet changer PAROTEC, 1 cooling unit LAHNTECHNIK BL 040-116, year of manufacture: 2008, 1 graphite extraction unit EXTOR 3500-3S MP. The machine displays an error message when the spindle is started, therefore it is being sold as defective. Gbsdpfxjyn Nhxe Af Uoi

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: Gsdex H Ib Nepfx Af Uobi - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: new, Year of construction: 2024, travel distance X-axis: 3,200 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 260 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: rotational speed infinitely variable, For sale: AIM 3410 machining center from Yilmaz. The center is 4-axis. Equipped with four clamps that are automatically positioned by the head. The machine has a 7.5 kW spindle in S1. Included is the CAMQUIX 3D software for machining preparation. The machine is an ex-demo unit and has never been used in production. Gsdpfoym Suxex Af Usbi

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231486, Used, refurbished 5-axis CNC machining centre Deckel MAHO DMF 250 linear Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical specifications: X-axis travel: 2,500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm B-axis: +/- 105° Working table: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 – 18,000 rpm Tool changer capacity: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg Gbsdpfoyir Uqox Af Uoi The machine can be inspected under power by appointment. Technical data and information subject to change and error; prior sale excepted!

Condition: used, Year of construction: 2017, operating hours: 20,384 h, machine/vehicle number: 20171011, 5-axis, travel paths (x/y/z): 670/820/600 mm, tool holder HSK 63, 96-position tool changer, recorded operating hours as of 05/25, 3D probe, laser workpiece measurement, rotary table Ø: 800 mm, power: 90 kVA, weight: 20,000 kg, chip conveyor SIN MIN MCG-5X, coolant pump LIS, coolant treatment, without shown machine vices, ATTENTION. Removal is mandatory on 18/19.02.2026! Gedpjyidknefx Af Uobi

Condition: used, Year of construction: 2018, operating hours: 15,233 h, machine/vehicle number: 20180707, 3-axis, travels (x/y/z): 1060/600/600 mm, SK 40 tool holder, 40-position tool changer, read operating hours as of 05/25, spindle speed: 10,000 rpm, 3D probe, measuring axis, power: 30 kVA, weight: 7,800 kg, chip conveyor SIN MIN M1050, year of manufacture: 2018, serial no.: 646, coolant treatment system HOMEWAY PF-120, year of manufacture: 2018, without the depicted magnetic clamping plate and machine vices, NOTE: Removal only possible on 23/24.03.2026, position 123 must be removed beforehand. Gjdeyidkhjpfx Af Usbi

Condition: used, Year of construction: 2016, operating hours: 12,618 h, machine/vehicle number: 14585615844, Travel (X/Y/Z): 1,150x700x550 mm, 120-position SK40 tool changer, weight: 9,650 kg, control: HEIDENHAIN, 1 chip conveyor, 1 belt filter system Gbjdpfxoyidlfs Af Uoi

Condition: used, Year of construction: 2016, operating hours: 11,159 h, machine/vehicle number: 11415746054, Travel distances (X/Y/Z): 500x450x400 mm, 30-position tool changer SK40, weight: 4,450 kg, control: SIEMENS, 1 chip conveyor, 1 band filter system. Gjdpfxjyidllo Af Ujbi

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: Gjdpfoxxvtusx Af Uebi # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: Gbodexxkd Ujpfx Af Uji # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)