Cornerformer

ACF Cornerformer Multiflex

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: Djdpfx Asr Axxzeiljcn SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Dcjdsi El Ucepfx Ailon

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Dcsdpfx Aeynbmmjilon Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Dcedew Imq Ropfx Ailjn

Condition: used, pressure 50 t Dcodpfxsra Rrhj Ailen chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Dcjdpfeydpxvex Ailjn Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches Dodpfxoy Saqgj Ailecn - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm Dcjdpfx Aioihp U Dslen

Condition: used, Year of construction: 2006, RASI S80.6L - Tube Bending Machine - For bending tubes and round profiles with curves and mandrels - Includes tools and documentation - Year of manufacture: 2006 Dcjdoyvvk Dopfx Ailen Technical data: - Tube diameter x wall thickness: 82 x 2.6 mm - Max. moment of resistance: 12.7 cm³ - Min. tube diameter: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Bending speed, return stroke (programmable): 0 - 9.3 rpm - Bending speed, forward stroke (programmable): 0 - 6.6 rpm - Counter support rail: fixed / rotating - Tool configuration: 1-, 2- or 3-groove - Bending direction: right - Feed speed (continuously variable): 0 - 60 m/min - Feed force: continuously adjustable during bending - Rotation speed (continuously variable): 0 - 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Diameter clearance of a clamping chuck: 6.5 mm - Bending length: 3 - 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V = - Machine length: < 7000 mm - Weight: approx. 2500 kg

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - Max. working length 3060 mm - Distance between uprights 2690 mm - Max. pressing force 1300 kN - Max. distance between table and ram 370 mm - Upright overhang 410 mm - Ram stroke 215 mm - Stroke speeds: - Downward speed (idle) max. 200 mm/s - Upward speed 135 mm/s - Downward pressing speed 1 to 11 mm/s - Total drive power 18 kW - Pneumatic connection 6 bar Djdpjx Ew Dqjfx Ailecn - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - Including: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning device - Controlled back gauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Machine does not perform referencing because 2 axes on the right side of the back gauge are not functioning; control module may be defective.