Used other sheet metal working machinery for sale (202)

Condition: good (used), 2 sets of circular knife shear exchange frames with stands and tools. (Circular knives + ejector rings and spacer rings) Shaft diameter: 220 mm Band width: 1600 mm Price: 10,000.00 EUR / each Bedpfx Ajw Uqu Hsknsww

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Bwsdpfxsrnq T Ns Aknew reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg Bwedpfxozwc Ips Aknsw • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.

Condition: ready for operation (used), A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible. Bwodpfszlt Sujx Aknow

Condition: good (used), Year of construction: 2009, machine/vehicle number: 67894-09, Offer 18204 Technical data: - Pole plate length 400 mm - Width 200 mm Bodpfxeumkafj Aknsww - Nominal adhesive force 150 N/cm² - Weight 35 kg - Space requirement W 400 x D 200 x H 60 mm

Condition: excellent (used), Year of construction: 1999, Coil-Ø: max. 2.000 mm Bsdpfx Akjycumconjww Coilbreite: max. 2.000 mm Coilgewicht: max. 13 t

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Bsdpfopr Utlsx Aknoww Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Bwodpfx Akjyzr Hljnjw

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Bwsdoq Ewi Aepfx Aknsw

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm Bodpfx Aolilztsknsww strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Year of construction: 1988, condition: good (used), coil weight: 10 t Bjdolimtvspfx Aknsww arm length: 1.400 arm Ø: 300 mm coil OD: max. 1.300 mm

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Bwjdpfx Ajy E Twaoknow Weight: 378 kg

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Bjdpfowhp N Dex Akneww

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Bsdpfsi El Ucsx Aknjww

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Bjdpfx Ajp E Eglskneww backup rolls: backup block/chain

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right Bedpsmqkubofx Akneww The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Bodpfox U Dwvjx Akneww

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new Bwjdpfoxc Hr Ajx Aknjw

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min Bjdexc Hygopfx Aknoww No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually Bwodju Icv Aspfx Aknjw -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto *

Year of construction: 1992, condition: excellent (used), Roll forming machine Manufacturer: Abele & Höltich Type: BB 20 Year of manufacture: 1992 Roller diameter: 180 mm Power: 5.5 kW Voltage: 400 volts Bwjdpjg Tcn Iofx Aknjw Space requirement: Width: 2400 mm Depth: 2100 mm Height: 1800 mm Documentation available.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines - 1.1 kW motor Bwjdpfx Aex E Srcjknow - Video demonstrating working principle available

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm Bedpfsxayy Isx Akneww reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Year of construction: 1990, condition: good (used), coil weight: max. 15 t Bwjdpfxjlimuhs Aknow coil OD: max. 1.800 mm

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring Bwodoztcykepfx Aknsw  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%