Used other sheet metal working machinery for sale (200)

Year of construction: 2006, condition: ready for operation (used), overall weight: 11,500 kg, total width: 1,950 mm, total height: 1,650 mm, product length (max.): 4,200 mm, Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details. • Geometry: Linear guides • Max. plate width: 2,100 mm • Max. plate thickness: 28 mm • Top roll diameter: 350 mm Laodpfxszylh Dj Albjh • Pinching roll diameter: 330 mm • Side roll diameter: 240 mm • Main motor power: 18.5 kW • Rolling speed: 7 m/min • Feature: Visualized/digital roll position indicators • Rolling performance: • Full width: up to 25 mm rolling / 20 mm pre-bending at Ø1,700 mm, 260 N/mm² • Full width: 20 mm / 16 mm at Ø400 mm, 260 N/mm² • Full width: 20 mm / 16 mm at Ø1,700 mm, 360 N/mm² • Full width: 18 mm / 14 mm at Ø400 mm, 355 N/mm² • Half width: up to 30 mm rolling / 25 mm pre-bending at Ø1,700 mm, 260 N/mm²

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible. Lodpfx Alszrhg Hjbjah

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut Lsdpfx Asy Nd Hyolbeah • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 1995, condition: used, A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible. Lajdozybuaspfx Albjh

Condition: like new (used), Radius tools from UKB Adapter 10.115 Radius diameter: 54 mm 3 x 835 mm Lower die 20.273 Includes PU cushions 3 x 835 mm Laodpfxsz Ery Io Albjh Complete set, new condition: €4,794

Year of construction: 2002, condition: ready for operation (used), overall weight: 4,500 kg, cutting length (max.): 2,080 mm, sheet thickness (max.): 6 mm, Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details. Ledpfjzr H Nmox Alboah - Stroke Rate: 18 1/min- Motor Power: 11 kW- Noise Level: < 70 dB(A)- Current Type: 3~ AC- Operating Voltage: 400 VAC- Control Voltage: 24 VDC- Frequency: 50 Hz- Fuse / Backup Protection: 32 A

Year of construction: 2000, condition: used, Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible. Lajdpfjzybt Nsx Albeh

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN Lodpfx Aox D Nwwjlboah This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Year of construction: 2012, operating hours: 14,534 h, condition: ready for operation (used), General Data Machine weight 13000 kg Control Unit Brand BYSTRONIC Model ByVision Cutting Main Drive Laser power 3000 W Lasdjx D R Ttspfx Albeh Table Table load 750 kg This Bystronic Bysprint Fiber 3015 3kW was manufactured in 2012. It features a max laser power of 3,000 W and handles sheet sizes up to 3000 × 1500 mm. It supports a max cutting thickness of 20 mm for steel and 12 mm for stainless steel and aluminium. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint Fiber 3015 3kW machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: as good as new (ex-display), Year of construction: 2024, 1-meter manual rolling mill with 3 rollers, featuring a disengageable roller. Robust cast iron structure. Rolling capacity: 1020 x 1.5 mm in mild steel. High-strength steel rollers. Laodpfx Aoz Dugzjlbeh Professional roller with 3 asymmetric rollers. Retractable top roller at the front for easy removal of the rolled piece. Bottom roller adjustment via handwheel and eccentric. Rear roller height adjustment via handwheel, with the option to tilt the roller for conical forming. The bottom and rear rollers are equipped with various grooves for winding mechanical wires or small components. Gear transmission.

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Ledpfxjyugl Ij Albeah

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Lajdpjzi S U Asfx Albjh

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Ljdpfxoy Tn N He Alboah

Year of construction: 2019, condition: ready for operation (used), Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible. Lsdpezcyrdsfx Albjah

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Laedpfozhw Swox Albsh

Year of construction: 1989, condition: ready for operation (used), Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment. Lajdpszukrqsfx Albjh

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: Lasdpfxozgfhws Albjh • 10 mm at 450 N/mm² • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator Lsdoymbfyspfx Albjah 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Ledpjza E S Dsfx Albeah

Year of construction: 2011, condition: ready for operation (used), A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible. Laedpfx Alezpyygsbsh

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Ledpfxezka Igs Albeah

Condition: good (used), Year of construction: 2009, machine/vehicle number: 67894-09, Offer 18204 Technical data: - Pole plate length 400 mm - Width 200 mm - Nominal adhesive force 150 N/cm² - Weight 35 kg Laedpsumkafjfx Alboh - Space requirement W 400 x D 200 x H 60 mm

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Lodpfx Aljzfaaleboah

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Lasdpfx Aloya Hwzjboh

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Laedpeyttwbjfx Alboh