Used Rolling Mill for sale (16,315)

Condition: ready for operation (used), A granite three-roll mill, presumably made by Rhenania, which was used for marzipan, is available. On-site inspection is possible. Hnodpfxjy Rthcs Ag Iel

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Hnodpfjy D Ug Hex Ag Ijl

Condition: used, Type: Three-roll mill Hsdpfx Agsy Abb Ie Ienl Roll width: 150 mm Roll diameter: 75 mm Number of rolls: 3 Safety sensor Control panel    

Condition: used, Year of construction: 2000, functionality: fully functional, 1x Used Bühler MDDL / MDDK Rollers are worn and can be re-grooved at an additional cost. Complete mill is already dismantled. Includes 4 drive motors. Spare parts can be supplied at extra cost. Hnsdpfxeyudt Ns Ag Ijl

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any work roll diameter: 80 mm Hnodpfop E Efvjx Ag Iol

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm Hsdsp E Egljpfx Ag Ienl speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min Hedpfx Asp E Ed Rsg Ienl working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Hsdpfx Aeycwrzjg Ionl

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Hnedpsx U Dwvjfx Ag Iel

Condition: excellent (used), Vollmer rolling mill Model: VWM 40U A rolling mill for gang saws Hnodpfx Aomxi Swjg Iel In good condition.

Condition: new, Year of construction: 2025, Walec mechaniczny W11G 1,2x1530 Napęd mechaniczny, wbudowany w 3 cylindryczne, specjalne opcje do obróbki cienkich blach. Hodpfx Agofwxuns Ionl Dane techniczne: Model `` W11G 1,2x1530 Marka ACL firmy ANFAN Moc silnika, kw, 1.5 Maksymalna grubość blachy (mm), mm, 1,2 ilość walców, szt,, 3 Długość, mm, 2700 Szerokość, mm, 600 Wysokość, mm, 900 Waga, kg, 500

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Hsdpfewzkuzsx Ag Ijnl Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Grinding rollers for Pfeiffer / Babcock bowl mill Used, refurbished, and new available from stock Hnjdsy Ittyspfx Ag Isl Heavy-duty grinding rollers from a bowl mill available for sale Viewing possible by appointment.

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions Hsdpfxey D Ndyo Ag Isnl -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: used, functionality: fully functional, Slow-running plastic granulator – only 25 rpm, preventing thermal damage. Gear roller mill Goliath Plus 1 Milling chamber size (feed chute): 228 x 172 mm Power requirement only 1.5 kW Weight 230 kg (built like a tank) Dust-reduced, consistent granulate quality. Easy cleaning in 2–3 minutes! Very quiet operation. Low energy consumption. Rotatable cutter elements for double the cutter unit service life Paddle level indicator in the discharge hopper: No "grinding in its own juice" possible, as the mill shuts down in advance. Hsdoy Azp Eopfx Ag Isnl

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Hjdpoxtiunsfx Ag Ijnl Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: refurbished (used), functionality: fully functional, - Bedeschi RS toothed crusher; - Haendle WMZ toothed crusher 412 A; - GHH 2366 WH 75/60 impact crusher; - Alfa paper shredders; Sawdust grinder, Wood chipper - Haendle HM2080 wet pan mill; - Haendle HM2080a wet pan mill - Breitenbach fine roller mill type PWF 812 800*1200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley ⌀650, motor pulley ⌀224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h; - Haendle fine roller mill type Alpha WFZH8100b. Commissioned in 1996. Not in operation since 2012. Gap adjustable from 0.6 mm. New roller shells installed. Bearings replaced with the participation of Haendle specialists; - Kema roller mill 1000x800, gap 1-3 mm; Hodpjyl Tmmsfx Ag Isnl - Rieter fine roller mill type GSA 1000x800, gap 1-1.5 mm; - Rieter-Werke Haendle roller mill type HW 80х80-HM, gap 0.6 mm; - Haendle mechanical roller mill type WFZ 880A, gap 0.8 mm, 42 t/h

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Due to the comprehensive technological modernization of our corn milling plant, originally built in the 1980s, our milling equipment has become available for sale. Hnodpjylhhfofx Ag Iel Over the decades, the machinery operated reliably and stably in our facility, supported by continuous maintenance and professional operation. Throughout these years, our company earned long-term trust from its partners, largely thanks to the consistently high product quality ensured by this technology. The plant primarily specialized in the production of corn grits as its main product, alongside feed flour, food-grade flour, corn germ, and other by-products. The offered equipment: - has been continuously maintained - can be inspected while in operation - is sold together with the existing spare parts inventory All available spare parts are included in the sale, representing a significant advantage for the future owner in terms of operational security and maintenance planning. The listed price refers to one unit. We have a total of 4 units. There is also the possibility to purchase all advertised equipment as a complete package, for which a customized and preferential price can be offered. This is an ideal opportunity for companies considering the establishment of a complete corn mill, capacity expansion, or technological development. The earliest planned removal date of the equipment is February 2027.

Condition: ready for operation (used), main motor 11 kW electric spindle height adjustment spindle diameter 40 mm Hjdpevl Ag Sefx Ag Isnl spindle height 250 mm tool diameter 330 mm side carriage pneumatic clamp feed

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 2031306, type of input current: three-phase, overall weight: 9,200 kg, Roller mill from Bühler, previously used in cornflakes production. Pre-installed are a metal detector and a vibratory channel. Control cabinet is included. Weight of the roller mill approx. 9,200 kg. Hodpfx Agsxgq Rke Ienl

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Hnjdpfx Agjy Iyw So Iol

Condition: used, Year of construction: 2010, Supper mini mill specs X 406mm Y 305mm Z 254mm . Max speed 10000 RPM . Power 15 HP (11.2 KW) . Taper CAT 40 / BT40 Hedey D A S Dspfx Ag Isnl

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit Hnsdpfxovpl I To Ag Isl - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Hjdpfxeq Nf U Ee Ag Isnl Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Hodpfx Ajq Nx Alsg Isnl Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.