Used Cnc Punching And Nibbeln Machine for sale (68,990)

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Bedpez Dv Tvjfx Amrewu Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Bedpfxjz Aarco Amrjwu Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Bwsdpjz Aalvefx Amreu Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm Bwjdpfx Amsz Aaw Sjrou - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Bwedoz Aawxepfx Amrju Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: ready for operation (used), A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible. Bwsdpfx Aovf Ix Hjmrsu

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Bwjdpfx Amoza E S Dersu

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Bsdpfxswhp N Do Amrjwu

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Bwjdpfszkbirjx Amrou Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Bedpszfaalofx Amrjwu

Condition: used, Year of construction: 2021, functionality: fully functional, operating hours: 2,460 h, number of axes: 4, number of slots in tool magazine: 6, actuation type: electric, table length: 15,000 mm, table width: 1,000 mm, Equipment: CE marking, For sale: CNC milling plotter Sentinel E 1015, purchased for wood milling applications. In practice, the machine was used exclusively as a cutting machine for corrugated cardboard. It was not used for heavy-duty wood or metal processing, and its components were not subjected to loads associated with such milling. Technical and visual condition: excellent. Condition and usage history as declared by the seller. P A R A M E T E R S / S E T C O N T E N T S Specifications and equipment ATC spindle, linear tool changer, and vacuum table with rotary vane pump. Working area X: 1000 mm / Y: 1500 mm / Z: 300 mm Kinematics: Linear guide Linear transmission: Structural rocker system ATC spindle: Power 8–9.6 kW; automatic tool change Spindle parameters: 24,000 rpm; ceramic bearings; ER 32; ISO 30 Tool changer: Linear, for 6 tools Bedpfjz Drmxjx Amrewu Drives: Digital AC servo drives: 4 × 400 W Vacuum table: HPL plate Machining technology: HSM (High Speed Machining) Measuring systems: Material height sensor; tool length sensor Tool cooling: Compressed air Material clamping: 3-pin clamping system Control: Control cabinet with computer, keyboard, and mouse Tools and accessories included Tool holders: Complete set of 6 ISO 30 tool holders ER 32 collets: Ø 3, 4, 6, 10, 12, and 16 mm Table accessories: Vacuum table seals: 30 m; 2 vacuum table supports Rotary vane vacuum pump included Model: C-VRL 301 Zephyr¹ Motor power: 5.5 kW Nominal capacity: 290 m³/h Final pressure: 150 hPa (mbar) ¹ Designating the pump according to the provided specifications; to be confirmed on the nameplate. M A T E R I A L S / M A C H I N E D E T A I L S Range of applications Machining capabilities depend on the tool used, material thickness, operating parameters, and machine configuration. Wood and wood-based boards: Wood, plywood, OSB, MDF, HDF. Metals: Aluminum, brass, bronze, and other metals, depending on the selected machining technology. Composites and technical boards: Composites, conglomerate, Corian, HPL, Dibond. Plastics and modeling materials: Prolab, polyurethane foam, polystyrene, expanded PVC, Plexi, polycarbonate, acrylic. Materials for cutting with an oscillating head² Technical polyurethane foam, sponge, cardboard, corrugated board, film, leather, fabric, rubber, plastics; Kryngielit, Gambit, Polonit, and other materials and boards.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. Bwedpfx Amez A D Rysreu * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder - table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm Bjdey Tu Ddspfx Amrewu - For further technical data, see the photographed data sheet - Including technical documentation - Including workbench and accessories such as HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Attention: The item must be collected between July 21 and July 23, 2026, on a date to be determined. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) Bwsdoznwu Sjpfx Amrsu - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Bwodpfx Aoz Dvfxjmreu Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bwodpfx Amozi Awhoreu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Bjdpfx Ajxu Hlgjmrswu Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Connection: 70 kW Weight: 16 t Dimensions: 7,000 x 7,400 mm

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: Bjdpfxoy Ni Ivs Amrswu 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Bodpfxoyahv Se Amrewu Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2010, Boschert TRI 1500 CNC Z Rota Revo TRUMPF quick tool change system Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Station 2 Trumpf system tool - size 3 (105 mm) with freely indexable rotation Station 3 Trumpf system tool / Boschert Revotool - size 3 (105 mm) incl. Revotool with 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) y- 1580 mm Punching arm overhang: 1730 mm Tool system Trumpf size 1-3 (105mm) Labod 32060 graphic control / workshop programmable Max. sheet metal thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball bearings in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Bwsdpfsid I D Aex Amrsu Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture: 2010 Very well-maintained condition - Overhauled with a large amount of accessories

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Bwsdpfezuxn Tjx Amreu Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW Bodpsxvch Tjfx Amrjwu VERY LESS HOURS SAFETY GUARDS

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important. Bwodpfxszlr Syo Amrsu

Condition: good (used), Year of construction: 2007, Well-maintained Euromac CNC punching and nibbling machine Bwedpfxozz N Tas Amrsu Type MTX Index 5 5-station tool changer with auto-indexing Stroke length 1250 mm Capacity 30 tons Includes 2 multi-tools and numerous tools (see photos)

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. Bwsdpez E R S Aefx Amrsu For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.