Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: Dohxz Nvju S Ev Do Usut >> Year of construction 1986 Machine no. 2102-2941 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : B8Qguzgavc Universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements Dujhxzohik Ezs Nv Ujt - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION Dujhxz Nveu Sppwe Uet For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 473-89, feed length X-axis: 550 mm, feed length Y-axis: 300 mm, feed length Z-axis: 425 mm, Machine in very good condition. Year of production: 2007 Control type: Fanuc 21i Axis travel: - X axis : 550 mm - Y axis : 300 mm - Z axis : 425 mm Dushxzsvkqxgj Nv Uet Machine tested. Loading of the machine included in the purchase price. Feel free to contact us.

Condition: ready for operation (used), Year of construction: 1989, Immediately free from education center : Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of construction 1989 Table 1250 x 250 mm Table load 1250 kg Travel X/ Y/ Z 700 / 400 / 500 mm Heidenhain 3 axes digital readout SK 40 Spindle speeds 55 - 2800 rpm Feed rates 10 - 630 mm / min stepless Vertical head Horizontal milling device Dshxz Nvjuw Rppe Ujut Drive 6,3 kw Weight 2.5 to At a price of Euro 3,000 plus VAT ex location

Condition: used, Year of construction: 1981, x-travel 600 mm y-travel 410 mm z-travel 200 mm turning speed range - horizontal 30 - 1280 U/min turning speed range - vertical 50 - 2150 U/min milling-head swivable +/- 90° spindle taper ISO SK40 table surface area 1000 x 315 mm total power requirement 3,2 kW weight of the machine ca. 1,44 t dimensions of the machine ca. 1,6 x 1,7 x 2,1 m Universal tool milling machine - Digital display - horizontally milling device - Coolant system - Vise - Operation manual Dushxjvkix Soz Nv Ust

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3 - axis - active digital display TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6195 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : Dushxz Nju Sr Rksv Ujt We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm Dujhxoh Ic Ufsz Nv Ujt spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel Dohxz Neu Sbbfjv Ujut - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: used, lunette, steady rest, lynette Dushou Rv Svjxz Nv Uet -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, Year of construction: 1997, operating hours: 18,298 h, Functionality: limited functionality, machine/vehicle number: 178-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 520 m/min, feed rate Z-axis: 630 m/min, tool mount: 40 mm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, power: 27 kW (36.71 HP), Equipment: rotational speed infinitely variable, CHIRON Type FZ 22 CNC vertical machining center CNC control Simens 810 Tool holder SK 40 DIN 69871 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Spindle speed max. 4500 Main spindle drive max. 27KW Thread cutting capacity M36 Milling capacity 460cm³/min Torque 360NM Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - Tool changer 40-fold must be overhauled - Indirect measuring system - Coolant unit with chip conveyor opposite Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Dujhxsvi Ntgjz Nv Ust Transport weight on the truck approx. 10 tons.

Condition: used, Year of construction: 1988, x-travel 500 mm y-travel 400 mm z-travel 400 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2*2*2 m Duehxz Nju Rutfov Ujt 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication Dshxzsu R D I Ss Nv Ueut >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine. No. 51265/08 Year of construction approx. 1967 travel X: 300 mm Y: 150 mm Z: 340 mm Duehxz Neghtvaev Ust table size 600 x 2100 mm spindle mounting SK 40 - S20 x 2 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,6 kW pole changeable Mains connection 380 Volt, 50 Hz - feed in X- and Z-axis - spindle speed via 2 motor speeds and 8 gear steps - Pinol shift at vertical milling head 60 mm - Fixed angular table - Adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm weight 650 kg good condition

Condition: used, x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg Dehsu Sbausxz Nv Uout range L-W-H 2300 x 2300 x 1800 mm from a training workshop maintained condition (!!) Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function * Machine link : ?machineno=1008-9131203

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg Deheu Rv S Ajxz Nv Ujut

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Brand CORREA Model CF22/25 Heidenhain TNC-420 numerical control (possibility of retrofit tnc 620) Dujhxz Nsviwahsv Ust Year of manufacture 1999 Fixed bench type TECHNICAL SPECIFICATIONS DIMENSIONS Table dimensions 2,500 x 700 mm Number of slots 5 T-measurement 22 mm DISTANCES X axis 2,500 mm Y axis 800 mm Z axis 800 mm MACHINE FEEDS Range 5-5000 mm/min Rapid feed / X,Y-Z 12,000 mm/min WEIGHTS AND DIMENSIONS Machine weight 10.000 Kg Maximum admissible table weight 3.500 kg Machine dimensions 6,400 x 3,345 x 2,800 mm

Condition: used, Year of construction: 1991, x-travel 560 mm y-travel 500 mm Dshxz Nou Rur Uov Usut z-travel 400 mm control Heidenhain TNC 114 Aktiv turning speed range 40 - 4000 U/min spindle drive, 2-steps 3,3 / 4 kW total power requirement 9 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,3 x 2,3 x 2,1 m

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: >> Year of construction approx. 1990 Machine no. 2102-5231 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Dujhou Rn Tlexz Nv Uet To the machine : We offer universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 33064 Year of construction approx. 1960 Duehxz Nodzp T Eev Uet travel X: 300 mm Y: 150 mm Z: 330 mm table size 600 x 210 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,1 and 1,4 kW Mains connection 380 Volt, 50 Hz - feed in X- and Y-axis - pinol shift at vertical milling head - fixed angular table - coolant unit with mechanical pump in the machine base - adjacent switch cabinet with cable plug connection space requirement L x W x H 1100 x 900 x 1600 mm weight approx. 900 kg good condition machine new painted in original grey color

Condition: used, Year of construction: 1973, x-travel 550 mm y-travel 155 mm z-travel 350 mm taper in main spindle SK 30 / DIN 2080 table surface area 640 x 200 mm turning speeds 50 - 1500 U/min Duehxz Nju Sbanjv Uet feeds 30 - 340 mm/min distance spindle - column 165 mm distance spindle nose and table 245 mm voltage 380 V total power requirement 1.3 kW weight ca. 1250 kg range L-W-H 950 x 1000 x 1600 mm from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor

Condition: used, lunette, steady rest, lynette Dohju Rv Spjxz Nv Ueut -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm -Weight: 3.4 kg

Condition: used, X-AXIS STROKE 6300 MM Y-AXIS STROKE (VERTICAL) 1700 MM Z-AXIS STROKE 1000 MM Duohxzsvir Nqo Nv Ust ISO 50 SPINDLE SPEED 1200 RPM 8000 X 1060 MM TABLE CNC HEIDENHAIN iTNC 320/530 BI-SPINDLE HEAD WIT ROTAZIONE 1 ° ( 360 POSITION )

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dujhsu Racrjxz Nv Uot Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, High-speed milling spindle HENNINGER type 801 - N 503 Speed max. 6000 rpm at 70% ED Gear ratio 1:6 Power transmission up to 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder SK 40 - S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in wooden storage box The head is equipped with bronze gears for high torque. Dead weight 5 kg Dujhxz Nvefxg T Uj Uot Weight complete 9.4 kg good condition