Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) Fshx Devy Ihds Ng Eopg - 2 positioning axes (B, C) - tools upon request

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Fohx D Ngovy A Tne Eepg Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: used, DMU 60 E with spindle 30,000 rpm Fpehx D Ngev E Scis Eeg

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Deckel KF 3 S type Copy Milling Machine Fshx Djv E Rw Sj Ng Eopg Very good condition

Condition: used, Lid FP4A milling machine Machine works, control takes a long time to start up. Fpjhx D Nsm Ak R Rog Eeg One axis, Y-axis is not always displayed when starting up. However, this is corrected again when restarting

Condition: excellent (used), Functionality: fully functional, Abene VHF3 Milling Machine Machine comes from teaching. Fpohx D Ngoumbx Ss Eog Installation and exchange possible If interested please call! Kenta Industrial Tools and Service Ambachtsstraat 3 7951 ZA Staphorst

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display Fehx Dovyr R Nj Ng Ejpg >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor Fpehx D Nsvy A Tbeg Eeg - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: good (used), Functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, table length: 3,000 mm, table width: 1,200 mm, spindle speed (max.): 18,000 rpm, table load: 6,000 kg, spindle nose: HSK A 63, Numerical control HEIDENHAIN 426 Table dimensions mm 3000x1200 Table capacity kg 6000 X-axis longitudinal travel mm 2800 Fpehx D Nevw A Dneg Esg Y-axis transversal travel mm 1600 Z-axis vertical travel mm 800 X/Y/Z linear axes rapid feeds m/min 35 Spindle power kW 18 Spindle speed rpm 18000 Tool magazine 40 positions Tool attachment HSK A63 Total installed power kW 68.7 COMPLETE WITH: -Roller guides -Internal spindle high pressure 20 bar -Automatic 5-axis continuous bi-rotary head -Chip conveyor USED MACHINE

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t Fshx D Njvylkcog Ejpg dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment!

Condition: excellent (used), Functionality: fully functional, From Swabia for model makers and professional hobbyists a beautiful machine with reasonable travel paths and with swivel and tilting table, 400 V, connected load 2.2 kW Travel paths: Fehx D Ngsvyk H Ns Eepg in X 280 mm in Y 170 mm in Z 250 mm ISO 30 mount. Table surface 680 x 180 mm Dimensions, W x D x H: 1 x 0.8 x 1.5 m Weight approx. 0.7 ton . Equipment: • Universal swivel and tilting table • 2 speed ranges, continuously adjustable, 150 - 2000 rpm • Feed in X-axis continuously adjustable, 15 - 250 mm/min • Coolant system • Right and left rotation

Condition: good (used), Year of construction: 1979, Functionality: fully functional, Axes: X_Table travel: 3000mm Y_CrossRail vertical travel: 1000mm Z_Milling Head - Saddle on CrossRail travel: 1500mm Fehouihrcjx D Ng Eopg U_Boring Bar vertical travel: 300mm Moving Table Load: max. 20000Kg/m (uniform distribution on table surface) Moving Table usable surface: 4000x1600mm Moving Table total surface: 4900x1600mm Distance between Table and Cross Rail: max 1200mm

Year of construction: 2003, Condition: used, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Fpohxjbpmurs D Ng Eeg Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Fjhx Doga T Ano Ng Espg Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug OPTIONS * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: new, I sell, milling machine new. Fpehx Dsuuiyts Ng Eog

Condition: new, Year of construction: 2024, Functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 Fohjvupa Rsx D Ng Eopg - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: excellent (used), Schunk Here we offer you a utility separator. Technical data: Outer dimensions: Width: 1325 mm Width control column 565 mm Depth: 1300 mm Shuttle overhang 730 mm Height: 1870 mm Overhang light column top 350 mm Operator height 900 mm Speed: X,Y: linear motor axes 2000 mm/s Z: linear motor axes 1000 mm/s Weight approx. 1500 Kg. Accuracy repeatability: 0,02 mm Position accuracy: 0,02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working range Max cutting area X,Y 430 mm 350 mm Max effective size X,Y 430 mm 350 mm LP thickness 0.5 -3.2 mm Power supply 400V / 50 Hz / 16 A Condition: used / used Type: SAR-1300 B Scope of delivery: As shown (Changes and errors in technical data, specifications are reserved!) Fjhx D Ngeikauie Ejpg We can answer further questions for you on the phone.

Condition: good (used), Spindel taper SK 40 Travel X-Axis 500 mm Fehx D Ngsin Dkts Ejpg

Condition: new, WMD25LV - 230V / 1F Drilling capacity steel ----- 25 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Fohx D Noga T Eiog Espg Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm Fohxevunrfj D Ng Eepg - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Year of construction: 1999, Condition: used, 1 used main spindle drive and Mainspindle drive INDRAMAT RAC 3.5-150-460-L00-W1-220 Siegfried Volz machine tools Fpehx D Ngedd Imde Eeg Rueschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, WMD20LV - 230V / 1F Drilling capacity steel ----- 20 mm Milling capacity steel ----- 20 mm Flute cutters ----- 63 mm Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK2 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable Fpshxsh S E Sbo D Ng Esg * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: new, WM6350F ROGI universal milling machine 400V-3F Drilling capacity steel ----- 50 mm Milling capacity steel ----- 25 mm Spindle milling capacity ----- 100 mm Horizontal motor ----- 2.2 KW Vertical motor ----- 2.2 KW Speed range horizontal milling spindle ----- 60 ~ 1350 r/min Speed range vertical milling spindle ----- 90 ~ 2000 r/min Spindle mounting ----- ISO 40 Table ----- 1325 x 320 mm Weight ----- 1500 KG INCLUDED Fjhx D Ngsga T Are Eopg * 3-axis digital readout brand SINO * Automatic feeding of work table X,Y,Z * Automatic spindle feeding * LED lighting * Cooling system * Luxury control box * Tilting milling head left/right 0-45 degrees * Rotating worktable OPTION * Pneumatic pull rod

Condition: new, WM5150 ROGI bed milling machine 400V-3F Motor ----- 2.4 KW Speed range vertical ----- 94 ~ 2256 rpm Spindle mounting ----- ISO 40 Table ----- 1220 x 360 mm Pinhole stroke ----- 180 mm Pinhole feed ----- 0,1 / 0,15 / 0,3 mm/rev Longitudinal displacement (x) ----- 600 mm Lateral displacement (y) ----- 360 mm Height displacement (z) ----- 500 mm Unload ----- 370 mm Spindle head swivel range ----- -45 to +45 Distance spindle / table ----- 110 - 610 mm Feed range along / across ----- (8) 24 - 720 mm/min Weight ----- 1800 KG INCLUDED * 3-axis digital readout brand SINO * Automatic feeding of work table X,Y * Automatic spindle feeding * LED lighting Fpshega T Dwox D Ng Eog * Cooling system * Luxury control box * Box with various tools

Condition: used, Year of construction: 1986, 3-axis milling machine Fpehjivg Saox D Ng Esg X-axis displacement ----- 300 mm Y-axis displacement ----- 110 mm Z-axis displacement ----- 210 mm Milling table ----- 480 x 125 mm Spindle drive ----- ISO30 Spindle speed ----- 100 - 4000 rpm Weight ----- 750 kg Dimensions ----- 1550 x 1150 x 1700 mm