Condition: good (used), Year of construction: 1999, – ISO40 – 50/1600 t/m – Table 1120 x 250 mm – Automatic feed on the X-axis – High-speed feed Dksbvev Irvzjmkxfel – 3D milling head – Cooling system – Lighting – Protective cover – Emergency stop – Documentation – 400V

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT Dkjbvmksv Iqbcoxfel - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: excellent (used), Year of construction: 2018, The machine is in very good condition. X-travel: 750 mm Y-travel: 650 mm Debvmsv Ipkijkxfjkl Z-travel: 560 mm Rotary table diameter: 650 mm Table surface: 800 x 650 mm Control: Heidenhain TNC 640 Spindle speed - continuously variable: 20,000 rpm ISO spindle mount: HSK 63 Tool changer: 60 positions Machine weight approx.: 12 t 5-axis simultaneous machining center, NC swivel rotary table +-120°, C-axis 360°, Heidenhain TS 649 infrared measuring probe, Blum laser, Internal coolant supply (ICC), internal coolant supply 40 bar, Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 Air nozzle Cooling system with blown air through the spindle center, Rotating viewing window, Rotoclear, Scraper-belt chip conveyor with 600-liter coolant system, paper belt filter, Oil and emulsion mist separation system, Chip flushing, Flushing gun with 2 bar / 40 l/min pump, Oil mist separator, ATC Application Tuning Cycle, MPC Machine Protection Control, 3D quickSET expansion package, Operating mode 4 - Manual intervention with open work area doors, Documentation Approx. 11,064 operating hours, only approx. 5,330 spindle hours

Year of construction: 2004, Condition: used, Milling machines Travel distance X: 760 mm Travel distanceY :550 mm Travel distance z: 400 mm HSC-machines milling machine / machining center Control: Röders RMS spindle chuck: HSK E40 spindle revolutions: 42000 rpm Dkobvmksv Awi Ajxfol table size X: 860 mm table size Y: 550 mm max. workpiece weight: 800 kg tool changer: 25 - time input Power : 14 kW Software Version 4.7

Condition: good (used), CNC - universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Year of manufacture 1997 -Travel paths X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - horizontal milling device -Drilling spindle -Coolant device -Angle table -Machine housing -Documentation Dobvjv Ikluemkxfjkl Dimensions: LxWxH 3.9x2x2 meters / weight 4000 kg Errors / input errors excepted -

Condition: used, Year of construction: 1995, Functionality: fully functional, milling machine Dkebvmkounrrfoxfjl

Condition: good (used), Stock number: 2912 Manufacturer: Deckel Machine number: 33414 Dobvmkeu Eb I Eexfskl Type / model: FP 1 Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle mount: SK 40 Feeds: 16 to 500 mm/min Connection: 1 / 1.5 kW Accessories/equipment: Heidenhain digital display, machine vice Condition: good, feeds do not engage! Selling price in actual condition Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. Dkobvmev Ip Izekxfjl TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: good (used), Execution : . - Clamping surface D = 400 mm - Overall height 196 mm Dkjbvmkxev Auhvsfjl - . - 3-jaw chuck TOS , D = 250 mm , very good condition .

Year of construction: 2000, Condition: used, Milling machines Travel distance X: 760 mm Travel distanceY :550 mm Travel distance z: 400 mm HSC-machines milling machine / machining center Dkjbvmsv Awivjkxfol Control: Röders RMS 6V3.15 spindle chuck: HSK E40 spindle revolutions: 42000 rpm table size X: 860 mm table size Y: 550 mm max. workpiece weight: 800 kg tool changer: 25 - time input Power : 14 kW IR-3D probe Full metal milling cutter max. 10mm Large external dust extraction system Cool-down spray system Röders tool shrinking unit External cooling unit

Condition: excellent (used), XYZ CNC Milling Machine Year of Manufacture 2014, CNC Control ProtoTrak SMX Machine Condition Very Good Table Size 1474 x 356 mm X Axis 1016 mm Y Axis 596 mm Dkjbvmov Anfnskxfsl Z Axis 584 mm (Head Traverse) Spindle Speeds rpm & ISO

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 2 U/min main drive DC 5 kW milling head -swivable total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control. Dkjbou Rt Nrovmkxfel

Condition: good (used), Table clamping surface: 1,000 x 400 mm Travel paths: 800 – 300 – 400 mm Speed range: 50 to 2,500 rpm Feed: 5 to 500 mm/min Rapid traverse: 1,500 mm/min Holder: SK40 Dkjbvmkxsvmnlcjfsl Condition: good, ready for use Accessories: Heidenhain digital display, various holders See pictures Connection: 3 kW Weight: 2.5 t Dimensions: 2,000 x 1,900 x 1,900 mm

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Dksbvmev Ip Alokxfjl Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: good (used), Boring head, spindle boring head, boring head WOHLHAUPTER , Type UPA 3 ISO 40 mounting including Dkjbvmkxev Aufujfsl Accessories according to pictures

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, feed length X-axis: 1,150 mm, feed length Y-axis: 370 mm, feed length Z-axis: 270 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, type of input current: three-phase, overall weight: 4,000 kg, space requirement length: 2,300 mm, space requirement height: 1,750 mm, input frequency: 50 Hz, The machine is very well designed and built, stable and very robust. It is very user-friendly due to its good accessibility. The machines were used for educational purposes only and had continuous inspection and servicing. Dkjbvmkxov Igursfsl

Condition: used, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control . 8 built in 1982 Machine overhauled by MMD in 2008, then rarely used in the workshop by an electronics company. Travel paths X: 700 mm, Y: 450 mm, Z: 500 mm Table size 1050 x 627 mm Debvmkov Amryoxfskl Spindle mount ISO 40 Spindle speed rpm 18 levels Feed rate X, Z axis 10-500 mm/min. continuously variable Feed rate Y axis 5-250 mm/min. continuously variable Rapid traverse X, Z axis 1.4 m/min. Rapid traverse Y axis 0.7 m/min. Vertical spindle displacement 100 mm Vertical spindle feed 0.02 / 0.03 / 0.05 / 0.08 / / mm/rev Horizontal spindle displacement 100 mm Spindle drive 5.5 kW Mains connection 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic. Quill feed 0.02 - mm/rev (6 levels) - Hydro-mechanical tool clamping - Coolant device in the machine base - Universal built-in rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm transverse adjustment - Rotary table with direct division 72 x 5° and indirect division via perforated disk 1:120 = 1 rev. = 3° - Swiveling control panel - Central lubrication - Operating instructions, - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirement L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Weight 4250 kg (weighed) very good condition

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min Dkebvmeu Rt I Iokxfjl control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Year of construction: 1980, Condition: ready for operation (used), Travel X/Y/Z: 440mm/1200mm, table dimensions X/Y: 440mm/1200mm, spindle mount: ISA 40, speed: 1800rpm, feed X/Y: 630mm/min, feed Z: 224mm/min, machine dimensions X/Y/Z: approx. 2150mm/2000mm/2100mm, weight: approx. 2400kg. Documentation available. On-site inspection is possible. Dkebvov Ifvuemkxfsl

Condition: used, Year of construction: 1988, Functionality: fully functional, last week put away working due to replacement by profile milling machine. Cover not shown are included. Dkobvmov Idt Eokxfel

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, table length: 2,000 mm, table width: 6,000 mm, rotary table diameter: 2,000 mm, PROMAC ETESIAN HMC 6.0 MACHINING CENTER MOBILE COLUMN WITH ROTARY TABLE Numerical control Heidenhain iTNC530 - HSCI X-axis travel 6,000 mm Y-axis travel 2,000 mm Z-axis travel 1,200 mm Rapid feed 30 m/min Work feed 20 m/min Rotary-translating table (B-axis) Dimensions 2,000 x 2,000 mm Load capacity 25,000 Kg Rotation speed 5 rpm Translating axis travel on inclined plane 2,000 mm n. 02 Fixed tables Table 1 Size 850 x 2,000 mm Table 2 Size 1,500 x 2,000 mm Capacity 15,000 Kg for each table Automatic fork head (orthogonal) A-axis +110°/-110° C-axis +200°/-200° Spindle motor 45 kW Spindle speed 6,000 rpm Tool taper HSK A 100 Automatic orthogonal head Dkobvmkxsv Idb Aofsl A-axis +110°/-110° C-axis +200°/-200° Spindle motor 30 kW Spindle speed 20,000 rpm Tool taper HSK A 63 Fixed horizontal head Spindle motor 45 kW Spindle speed 6,000 rpm Tool taper HSK A 100 214-position tool changer Complete with: - 3-station head change magazine - n.02 numerical controls - Automatic head changer provision - Optical lines - HR 550 wireless multifunction portable electronic handwheel - Operator protection fairing on board the machine - High pressure through the spindle 40 bar - Chip conveyor - 6 bar air tool cleaning system - Laser tool presetting system - Piece alignment control probe USED MACHINE

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center Dksbvjr E D Eaemkxfel max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: used, Year of construction: 2020, Functionality: fully functional, Nimac Atlas beamsaw 4300 x 4300 Cutting height 95mm Year 2020 Side Aligner Windows PC Label printer Dkobvmev Ibzmjkxfjl Optimisation software 4 air tables 9 grippers Available September 2025

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mm Maximum weight on table: 25000 kg Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Vertical capacity (VC): 450 / 1450 mm Distance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º) Tool clamping system: Hydraulic Taper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872 Speed range: 6000 rpm Spindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 56000 Kg Machine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors with a perimetral wire-mesh fence Automatic tool changer: Optional Djbveu T S Dwomkxfokl Chip conveyor: 1 transversal hinge type Electronic handwheel: New HR-520 Coolant: External & internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare parts Sale price (Ex Work): On request View all technical features

Year of construction: 1984, Condition: ready for operation (used), A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, speed: 2000rpm, feed: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. An on-site inspection is possible. Dkjbvmkjv Ifwroxfsl