Condition: used, Year of construction: 1970, x-travel 3600 mm y-travel 920 mm z-travel 1000 mm Fjlita Ieu Db Aaotjgb weight of the machine ca. 23 t Year of construction approx. 1970 X 3600mm Y 920mm Z 1000 mm Head rotates 180° Table Length 3600mm Width 920mm

Condition: used, CME FCM-5000 5500mm x 950mm CNC Bed Mill Serial No.2317 Year of Manufacture 1994 Control Heidenhain TNC415 Table Size 5500mm x 950mm Longitudinal Travel X Axis – 5000mm Cross Travel Z Axis – 2000mm Vertical Travel Y Axis – 1200mm Longitudinal Travel & Vertical Feeds 10,000 mm per minute Spindle Taper ISO 50 Input 380 Volts 50 Cycles Spindle Motor 22 Kw Folitewaliwsa Itsgb Spindle Speeds 50 – 3000 rpm Feed Rate 4000mm per minute Fitted with16 Automatic Tool Changer Swarf Conveyor Nett weight approx. 32,000 Kgs

Condition: good (used), Year of construction: 2009, operating hours: 21,000 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 X travel: 6,000 mm Y travel: 1,200 mm Z travel: 2,000 mm C-axis: 0.001° (preparation) Fgslitewakxqea Itjb Movement and Dynamics Rapid traverse X/Y/Z: 30 m/min Table Table clamping area (L x W): 7,500 x 1,100 mm Table load: max. 5,000 kg Spindle and Tool Spindle drive power: 60 kW Spindle speeds: 6,000 rpm Tool holder: SK 50 Tool changer: 60 Accuracy Positioning accuracy: ±0.030 mm Repeatability: ±0.010 mm Head and axis options Automatic Universal swivel head: 1° × 1° 4th axis preparation: rotary table EQUIPMENT - Automatic universal swivel head - Accessories - Tools - Mounting fixtures - Preparation for rotary table (4th axis)

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 main spindle: turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Felitsvdt Uqoa Itsgb Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, machine/vehicle number: 111146, the machine has an IKZ 22 bar. Chip conveyor, handwheel, Heidenheim control 530 machine is sold without tools without vice technical condition very good, can be inspected at any time without electricity. Felitaju A Azuj Itogb

Condition: ready for operation (used), total height: 2,970 mm, total length: 5,300 mm, controller manufacturer: Fanuc, net weight: 9,000 kg, total depth: 3,180 mm, Type: Vcenter 205 Pendelbewerking met centraal scheidingssysteem (zoals Mazak VTC) + all tools!! Longitudinal travel X-axe: 2050 mm Crosstravel Y -axe: 550 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 2500 x 550 mm Max Height of workpiece: 740 mm Power on spindle: 7,5 kW Fgjlitasv Sft Us Itjb Admission in millingheadspindle (ISO): BT-40 Max speedrange: 10 > 12 000 rpm Power needed: 40 kVa ACCESSORIES & TOOLING: toolchanger 24 positions

Condition: used, Year of construction: 2000, Used Kunzmann WF 4/3 universal milling and drilling machine with Heidenhain TNC 124 linear control X/Y/Z travel = 400/350/400 mm Speed 1-4000 rpm Vertical head with 60 mm quill Fslitasv R T H To Itogb Fixed angle table 650 x 350 mm SK40 spindle with hydraulic tool clamping Accessories: - Electronic handwheel Heidenhain HR 410 - Chip protection cabinet - Machine light - Coolant system - Machine feet The machine is located at our location in 71334 Waiblingen-Beinstein, is immediately available, and can also be inspected. Please register in advance.

Condition: used, Technical details: Fslijva Evfjta Itogb x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm table surface area: 1070 x 230 mm spindle taper: Iso 40 weight of the machine ca.: 1600 kg This machine is currently in the technical department. *

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fslitsvduahoa Itegb Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,958 h, machine/vehicle number: 121113, used milling machine IKZ 22 bar chip conveyor handwheel technical condition very good. The machine is sold without tools and without accessories under power Inspection possible at any time. Fgelsu A A Dcsita Itjb

Condition: ready for operation (used), controller manufacturer: Siemens, net weight: 55,000 kg, 2 column portal gantry milling machine between columns: 2550 mm!! 5 axes milling head cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 Fgelijv Sfkajta Itjb ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) Fgelitaou Nc Emj Itsb hydraulic system working area lighting *

Condition: used, Year of construction: 1986, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 4 In our opinion, the machine is in very good used condition and can be viewed under power by appointment. including round table Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Fgolitovtgwkoa Itjb Subject to prior sale!

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Fgjlitev Sfk Hea Itob Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: used, Technical details: Fgelitasu Nggne Itjb electrics - voltage/frequency: 380 V/Hz total power requirement: 1,1 kW machine weight approx.: 18 kg dimensions L x W x H: 0,32 x 0,50 x 0,25 m EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm, rotatable 15° - 45° Milling bevel width max. 5.0mm, angle 15° - 45° *

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50 HZ installed capacity: 84 KVA amperage - max. max. 120 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Fjlitaov N Rano Itegb Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. Fgjlitou Nc Riea Iteb table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² compressed air: 6,3 bar Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, x-travel 560 mm Felitasvduans Itsgb y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg Fjleu Nc T Rsita Itegb total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 2.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of Fgelitaev Irk So Iteb delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell Fgolita Isu Nc U Ietob - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fgjlitsvdt U Rja Itjb Subject to changes and errors in the technical data and information as well as prior sale!

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50Hz installed capacity: 104 KVA current intensivity max. 150 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected Fgolita Ijv N Rabotjb under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2013, Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Felijv N Rbxjta Itjgb Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Felitasvdt U Do Itogb Subject to changes and errors in the technical data and information as well as prior sale!